OpenHAB Archieven - DomoticX Knowledge Center

Internet of Things – OpenHAB 2 – Installeren op de Raspberry Pi (UAI)

Door Sebastiaan Geplaatst op 2017-11-21 Geplaatst in OpenHAB Getagd met Domotica, Internet of Things, OpenHAB, OpenHAB 2

Website Hieronder vind je een UAI (Unattended Install) van OpenHAB 2 op de Raspberry Pi, het is een 2GB IMG bestand dat je een (aantal) uur moet laten draaien, voor het gemak ook de OpenHAB geïnstalleerde IMG toegevoegd! Webadres: http://192.168.X.X:8080/start/index …

Internet of Things – OpenHAB 2 – Installeren op de Raspberry Pi (UAI) Lees meer »

Internet of Things – OpenHAB1 – MySQL (persistence)

Door Sebastiaan Geplaatst op 2017-11-21 Geplaatst in OpenHAB Getagd met addon, Domotica, Internet of Things, MySQL, OpenHAB, Persistence

1) Installeer de OpenHAB MySQL persistence addon met apt-get: sudo apt-get install -y openhab-addon-persistence-mysql

Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
openhab-addon-persistence-mysql
0 upgraded, 1 newly installed, 0 to remove and 127 not upgraded.
Need to get 832 kB of archives.
After this operation, 833 kB of additional disk space will be used.
Get:1 http://dl.bintray.com/openhab/apt-repo stable/main armhf openhab-addon-persistence-mysql all 1.8.3 [832 kB]
Fetched 832 kB in 0s (4,006 kB/s)
Selecting previously unselected package openhab-addon-persistence-mysql.
(Reading database ... 124416 files and directories currently installed.)
Preparing to unpack .../openhab-addon-persistence-mysql_1.8.3_all.deb ...
Unpacking openhab-addon-persistence-mysql (1.8.3) ...
Setting up openhab-addon-persistence-mysql (1.8.3) ...

Reading package lists... Done

Building dependency tree

Reading state information... Done

The following NEW packages will be installed:

openhab-addon-persistence-mysql

0 upgraded, 1 newly installed, 0 to remove and 127 not upgraded.

Need to get 832 kB of archives.

After this operation, 833 kB of additional disk space will be used.

Get:1 http://dl.bintray.com/openhab/apt-repo stable/main armhf openhab-addon-persistence-mysql all 1.8.3 [832 kB]

Fetched 832 kB in 0s (4,006 kB/s)

Selecting previously unselected package openhab-addon-persistence-mysql.

(Reading database ... 124416 files and directories currently installed.)

Preparing to unpack .../openhab-addon-persistence-mysql_1.8.3_all.deb ...

Unpacking openhab-addon-persistence-mysql (1.8.3) ...

Setting up openhab-addon-persistence-mysql (1.8.3) ...

2) Stel het MySQL wachtwoord in: sudo mysqladmin -u root password 3) Maak een database aan genaamd “openhab”: sudo echo "create database openhab" | mysql -u root -p Controleer of de database is aangemaakt met: sudo mysql MySQL commando: show databases;

Welcome to the MariaDB monitor. Commands end with ; or \g.
Your MariaDB connection id is 16
Server version: 10.1.23-MariaDB-9+deb9u1 Raspbian 9.0

Copyright (c) 2000, 2017, Oracle, MariaDB Corporation Ab and others.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

MariaDB [(none)]> show databases;
+--------------------+
| Database |
+--------------------+
| information_schema |
| mysql |
| openhab |
| performance_schema |
+--------------------+
4 rows in set (0.00 sec)

Welcome to the MariaDB monitor. Commands end with ; or \g.

Your MariaDB connection id is 16

Server version: 10.1.23-MariaDB-9+deb9u1 Raspbian 9.0

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

MariaDB [(none)]> show databases;

+--------------------+

| Database |

+--------------------+

| information_schema |

| mysql |

| openhab |

| performance_schema |

+--------------------+

4 rows in set (0.00 sec)

4) Maak …

Internet of Things – OpenHAB1 – MySQL (persistence) Lees meer »

Internet of Things – OpenHAB1 – Aansturen GPIO

Door Sebastiaan Geplaatst op 2017-11-18 Geplaatst in OpenHAB Getagd met addon, Domotica, GPIO, Internet of Things, OpenHAB

Aansturen GPIO Op deze pagina laten we zien hoe je GPIO pinnen kan aansturen via OpenHAB. 1) Installeer de GPIO binding addon voor OpenHAB: sudo apt-get install -y openhab-addon-binding-gpio 2) de gebruiker openhab heeft nog geen toegang tot de gpio pinnen, dit kan je …

Internet of Things – OpenHAB1 – Aansturen GPIO Lees meer »

Internet of Things – OpenHAB1 – HABmin (addon)

Door Sebastiaan Geplaatst op 2017-11-18 Geplaatst in OpenHAB Getagd met addon, Domotica, HABmin, Internet of Things, OpenHAB

Website HABmin kan je installeren als administratieve console van OpenHAB, het is erg gebruikersvriendelijk en bied een complete interface voor OpenHAB. Informatie (ENG) ABmin is a web administration console for openHAB. It aims to provide a complete interface to administer openHAB, …

Internet of Things – OpenHAB1 – HABmin (addon) Lees meer »

Internet of Things – OpenHAB1 – Installeren op de Raspberry Pi (UAI)

Door Sebastiaan Geplaatst op 2017-11-18 Geplaatst in OpenHAB Getagd met Domotica, Internet of Things, OpenHAB, UAI

Hieronder vind je een UAI (Unattended Install) van OpenHAB1 op de Raspberry Pi, dit SH script kan je uitvoeren en OpenHAB1 wordt automatisch geïnstalleerd!

#!/bin/bash

# Edit to match your settings
username="pi"
password="raspberry"

# Update these as necessary
runtime="https://bintray.com/artifact/download/openhab/bin/distribution-1.8.3-runtime.zip"
addons="https://bintray.com/artifact/download/openhab/bin/distribution-1.8.3-addons.zip"
demo="https://bintray.com/artifact/download/openhab/bin/distribution-1.8.3-demo.zip"

runtime_file=${runtime##https:/*/}
addons_file=${addons##https:/*/}
demo_file=${demo##https:/*/}

clear
echo "Starting unattended install of openHAB demo on a Rasppberry Pi"
echo "... requires DietPi or raspbian installed with user: $username and password: $password"

if [ $UID -ne 0 ] 
then
        echo -e "Error: Run script as sudo: sudo bash ./openhab_uai.sh "
        exit
fi

# doesn't seem to matter if init.d or systemd is used, both can be active
# I was going to modify to cover both init and systemd cases and exit on other
# i=$(ps -p 1 -o comm=)
# if [ $i = "systemd" ] 
# then
# 	echo "Raspberry Pi is running systemd"
# elif [ $i = "init" ]
# then
# 	echo "Raspberry Pi is not running systemd"
# 	exit 1
# else
# 	echo "Raspberry Pi is not running systemd or init"
# 	exit 1
# fi

echo "Check home directory"
c=$(pwd)
if [ "$c" != "/home/pi" ]
then
	echo "Error: The unattended install runs on dietpi or raspbian"
	echo "and requires user: pi with home directory: /home/pi and not $c"
	echo "Failed to install"
	exit 1
fi

echo "Update available packages and their versions"
sudo apt-get update -y
if [ $? -ne 0 ]
then
	echo "Error: Failed apt-get update"
	exit $?
fi

echo "Upgrade before installing new packages"
sudo apt-get upgrade -y
if [ $? -ne 0 ]
then
	echo "Error: Failed apt-get upgrade"
	exit $?
fi

echo "Install java 8, if already installed it will skip"
sudo apt-get install oracle-java8-jdk -y 
if [ $? -ne 0 ]
then
	echo "Error: Failed install of java8"
	exit $?
fi

echo "Install eclipse"
sudo apt-get install eclipse -y
if [ $? -ne 0 ]
then
	echo "Error: Failed install of eclipse"
	exit $?
fi

echo "Install mosquitto"
echo "... get key"
wget http://repo.mosquitto.org/debian/mosquitto-repo.gpg.key 
if [ $? -ne 0 ]
then
	echo "Error: Failed get of mosquitto key"
	exit $?
fi

echo "... add apt-key"
sudo apt-key add mosquitto-repo.gpg.key
if [ $? -ne 0 ]
then
	echo "Error: Failed adding mosquitto key"
	exit $?
fi

echo "... remove key file"
rm mosquitto-repo.gpg.key
if [ $? -ne 0 ]
then
	echo "Error: Failed removing mosquitto key"
	exit $?
fi

echo "... change to sources directory"
cd /etc/apt/sources.list.d/
if [ $? -ne 0 ]
then
	echo "Error: Failed to changes to apt sources directory"
	exit $?
fi

echo "... get mosquitto for jessie"
sudo wget http://repo.mosquitto.org/debian/mosquitto-jessie.list
if [ $? -ne 0 ]
then
	echo "Error: Failed to get mosquitto"
	exit $?
fi

echo "... install mosquitto"
sudo apt-get install mosquitto mosquitto-clients -y
if [ $? -ne 0 ]
then
	echo "Error: Failed to install mosquitto"
	exit $?
fi

echo "Make openHAB directory"
sudo mkdir /opt
sudo mkdir /opt/openhab
sudo mkdir /opt/openhab/addons
sudo chmod -R ugo+rw /opt/openhab
cd /opt/openhab

echo "Download openHAB runtime"
echo "... get openhab runtime"
sudo wget $runtime
if [ $? -ne 0 ]
then
	echo "Error: Failed to get openhab runtime"
	exit $?
fi
sudo unzip $runtime_file
sudo rm $runtime_file

echo "Download openHAB addons"
echo "... get openhab addons"
cd /opt/openhab/addons
sudo wget $addons
if [ $? -ne 0 ]
then
	echo "Error: Failed to get openhab addons"
	exit $?
fi
sudo unzip $addons_file
sudo rm $addons_file

echo "Download openHAB demo"
echo "... get openhab demo"
cd /opt/openhab
sudo wget $demo
if [ $? -ne 0 ]
then
	echo "Error: Failed to get openhab demo"
	exit $?
fi
sudo unzip -o $demo_file 
sudo rm $demo_file

echo "Change start script to be executable"
cd /opt/openhab
sudo chmod +x start.sh
if [ $? -ne 0 ]
then
	echo "Error: Failed to change permissions on start.sh"
	exit $?
fi

echo "Recursively set permissions on openHAB directories"
sudo chmod -R ugo+rw /opt/openhab
if [ $? -ne 0 ]
then
	echo "Error: Failed to change permissions on openhab directories"
	exit $?
fi

echo "Create openHAB users config"
sudo echo "user=password,user,role" > /opt/openhab/configurations/users.cfg
sudo echo "$username=$password" >> /opt/openhab/configurations/users.cfg
if [ $? -ne 0 ]
then
	echo "Error: Failed to write users.cfg properly"
	exit $?
fi

echo "Add MQTT binding"
sudo cp /opt/openhab/configurations/openhab_default.cfg /opt/openhab/configurations/openhab.cfg

echo "Uncomment config settings"
sed -i '/mqtt:broker.url=tcp:\/\/localhost:1883/s/^#//g' /opt/openhab/configurations/openhab.cfg
sed -i '/mqtt:broker.clientId=openhab/s/^#//g' /opt/openhab/configurations/openhab.cfg 

echo "Make system directory"
sudo mkdir /usr/lib/systemd
sudo mkdir /usr/lib/systemd/system 
sudo rm /usr/lib/systemd/system/openhab.service

echo "Create a start-up file"
sudo echo "[Unit]" > /usr/lib/systemd/system/openhab.service
sudo echo "Description=openHAB Home Automation Bus" >> /usr/lib/systemd/system/openhab.service
sudo echo "Documentation=http://www.openhab.org" >> /usr/lib/systemd/system/openhab.service
sudo echo "Wants=network-online.target" >> /usr/lib/systemd/system/openhab.service
sudo echo -e "After=network-online.target\n" >> /usr/lib/systemd/system/openhab.service
sudo echo "[Service]" >> /usr/lib/systemd/system/openhab.service
sudo echo "Type=simple" >> /usr/lib/systemd/system/openhab.service
sudo echo "GuessMainPID=yes" >> /usr/lib/systemd/system/openhab.service
sudo echo "User=pi" >> /usr/lib/systemd/system/openhab.service
sudo echo "ExecStart=/opt/openhab/start.sh" >> /usr/lib/systemd/system/openhab.service
sudo echo -e "ExecStop=kill -SIGINT \$MAINPID" >> /usr/lib/systemd/system/openhab.service
sudo echo "Restart=on-failure" >> /usr/lib/systemd/system/openhab.service
sudo echo -e "WorkingDirectory=/opt/openhab\n" >> /usr/lib/systemd/system/openhab.service
sudo echo "[Install]" >> /usr/lib/systemd/system/openhab.service
sudo echo "WantedBy=multi-user.target" >> /usr/lib/systemd/system/openhab.service
if [ $? -ne 0 ]
then
	echo "Error: Failed to write systemd service properly"
	exit $?
fi

echo "Change owner recursively on openhab"
sudo chown -R pi:pi /opt/openhab
if [ $? -ne 0 ]
then
	echo "Error: Change owner on openhab to pi"
	exit $?
fi

echo "Reload systemd so daemon is aware of new configuration"
sudo systemctl --system daemon-reload
cd /usr/lib/systemd/system
sudo systemctl enable openhab.service
sudo systemctl start openhab.service 

echo -e "openHAB demo successfully installed!\n"
echo "Reboot Raspberry Pi with command: sudo reboot"
echo "Rebooting Raspberry Pi and starting openHAB takes about 5 minutes"
echo "After waiting 5 minutes, open browser and enter the following in URL"
echo "   http://?raspberry-pi-ip?:8080/openhab.app?sitemap=demo"
exit 0

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

252

253

#!/bin/bash

# Edit to match your settings

username="pi"

password="raspberry"

# Update these as necessary

runtime="https://bintray.com/artifact/download/openhab/bin/distribution-1.8.3-runtime.zip"

addons="https://bintray.com/artifact/download/openhab/bin/distribution-1.8.3-addons.zip"

demo="https://bintray.com/artifact/download/openhab/bin/distribution-1.8.3-demo.zip"

runtime_file=${runtime##https:/*/}

addons_file=${addons##https:/*/}

demo_file=${demo##https:/*/}

clear

echo "Starting unattended install of openHAB demo on a Rasppberry Pi"

echo "... requires DietPi or raspbian installed with user: $username and password: $password"

if [ $UID -ne 0 ]

then

echo -e "Error: Run script as sudo: sudo bash ./openhab_uai.sh "

exit

# doesn't seem to matter if init.d or systemd is used, both can be active

# I was going to modify to cover both init and systemd cases and exit on other

# i=$(ps -p 1 -o comm=)

# if [ $i = "systemd" ]

# then

# echo "Raspberry Pi is running systemd"

# elif [ $i = "init" ]

# then

# echo "Raspberry Pi is not running systemd"

# exit 1

# else

# echo "Raspberry Pi is not running systemd or init"

# exit 1

# fi

echo "Check home directory"

c=$(pwd)

if [ "$c" != "/home/pi" ]

then

echo "Error: The unattended install runs on dietpi or raspbian"

echo "and requires user: pi with home directory: /home/pi and not $c"

echo "Failed to install"

exit 1

echo "Update available packages and their versions"

sudo apt-get update -y

if [ $? -ne 0 ]

then

echo "Error: Failed apt-get update"

exit $?

echo "Upgrade before installing new packages"

sudo apt-get upgrade -y

if [ $? -ne 0 ]

then

echo "Error: Failed apt-get upgrade"

exit $?

echo "Install java 8, if already installed it will skip"

sudo apt-get install oracle-java8-jdk -y

if [ $? -ne 0 ]

then

echo "Error: Failed install of java8"

exit $?

echo "Install eclipse"

sudo apt-get install eclipse -y

if [ $? -ne 0 ]

then

echo "Error: Failed install of eclipse"

exit $?

echo "Install mosquitto"

echo "... get key"

wget http://repo.mosquitto.org/debian/mosquitto-repo.gpg.key

if [ $? -ne 0 ]

then

echo "Error: Failed get of mosquitto key"

exit $?

echo "... add apt-key"

sudo apt-key add mosquitto-repo.gpg.key

if [ $? -ne 0 ]

then

echo "Error: Failed adding mosquitto key"

exit $?

echo "... remove key file"

rm mosquitto-repo.gpg.key

if [ $? -ne 0 ]

then

echo "Error: Failed removing mosquitto key"

exit $?

echo "... change to sources directory"

cd /etc/apt/sources.list.d/

if [ $? -ne 0 ]

then

echo "Error: Failed to changes to apt sources directory"

exit $?

echo "... get mosquitto for jessie"

sudo wget http://repo.mosquitto.org/debian/mosquitto-jessie.list

if [ $? -ne 0 ]

then

echo "Error: Failed to get mosquitto"

exit $?

echo "... install mosquitto"

sudo apt-get install mosquitto mosquitto-clients -y

if [ $? -ne 0 ]

then

echo "Error: Failed to install mosquitto"

exit $?

echo "Make openHAB directory"

sudo mkdir /opt

sudo mkdir /opt/openhab

sudo mkdir /opt/openhab/addons

sudo chmod -R ugo+rw /opt/openhab

cd /opt/openhab

echo "Download openHAB runtime"

echo "... get openhab runtime"

sudo wget $runtime

if [ $? -ne 0 ]

then

echo "Error: Failed to get openhab runtime"

exit $?

sudo unzip $runtime_file

sudo rm $runtime_file

echo "Download openHAB addons"

echo "... get openhab addons"

cd /opt/openhab/addons

sudo wget $addons

if [ $? -ne 0 ]

then

echo "Error: Failed to get openhab addons"

exit $?

sudo unzip $addons_file

sudo rm $addons_file

echo "Download openHAB demo"

echo "... get openhab demo"

cd /opt/openhab

sudo wget $demo

if [ $? -ne 0 ]

then

echo "Error: Failed to get openhab demo"

exit $?

sudo unzip -o $demo_file

sudo rm $demo_file

echo "Change start script to be executable"

cd /opt/openhab

sudo chmod +x start.sh

if [ $? -ne 0 ]

then

echo "Error: Failed to change permissions on start.sh"

exit $?

echo "Recursively set permissions on openHAB directories"

sudo chmod -R ugo+rw /opt/openhab

if [ $? -ne 0 ]

then

echo "Error: Failed to change permissions on openhab directories"

exit $?

echo "Create openHAB users config"

sudo echo "user=password,user,role" > /opt/openhab/configurations/users.cfg

sudo echo "$username=$password" >> /opt/openhab/configurations/users.cfg

if [ $? -ne 0 ]

then

echo "Error: Failed to write users.cfg properly"

exit $?

echo "Add MQTT binding"

sudo cp /opt/openhab/configurations/openhab_default.cfg /opt/openhab/configurations/openhab.cfg

echo "Uncomment config settings"

sed -i '/mqtt:broker.url=tcp:\/\/localhost:1883/s/^#//g' /opt/openhab/configurations/openhab.cfg

sed -i '/mqtt:broker.clientId=openhab/s/^#//g' /opt/openhab/configurations/openhab.cfg

echo "Make system directory"

sudo mkdir /usr/lib/systemd

sudo mkdir /usr/lib/systemd/system

sudo rm /usr/lib/systemd/system/openhab.service

echo "Create a start-up file"

sudo echo "[Unit]" > /usr/lib/systemd/system/openhab.service

sudo echo "Description=openHAB Home Automation Bus" >> /usr/lib/systemd/system/openhab.service

sudo echo "Documentation=http://www.openhab.org" >> /usr/lib/systemd/system/openhab.service

sudo echo "Wants=network-online.target" >> /usr/lib/systemd/system/openhab.service

sudo echo -e "After=network-online.target\n" >> /usr/lib/systemd/system/openhab.service

sudo echo "[Service]" >> /usr/lib/systemd/system/openhab.service

sudo echo "Type=simple" >> /usr/lib/systemd/system/openhab.service

sudo echo "GuessMainPID=yes" >> /usr/lib/systemd/system/openhab.service

sudo echo "User=pi" >> /usr/lib/systemd/system/openhab.service

sudo echo "ExecStart=/opt/openhab/start.sh" >> /usr/lib/systemd/system/openhab.service

sudo echo -e "ExecStop=kill -SIGINT \$MAINPID" >> /usr/lib/systemd/system/openhab.service

sudo echo "Restart=on-failure" >> /usr/lib/systemd/system/openhab.service

sudo echo -e "WorkingDirectory=/opt/openhab\n" >> /usr/lib/systemd/system/openhab.service

sudo echo "[Install]" >> /usr/lib/systemd/system/openhab.service

sudo echo "WantedBy=multi-user.target" >> /usr/lib/systemd/system/openhab.service

if [ $? -ne 0 ]

then

echo "Error: Failed to write systemd service properly"

exit $?

echo "Change owner recursively on openhab"

sudo chown -R pi:pi /opt/openhab

if [ $? -ne 0 ]

then

echo "Error: Change owner on openhab to pi"

exit $?

echo "Reload systemd so daemon is aware of new configuration"

sudo systemctl --system daemon-reload

cd /usr/lib/systemd/system

sudo systemctl enable openhab.service

sudo systemctl start openhab.service

echo -e "openHAB demo successfully installed!\n"

echo "Reboot Raspberry Pi with command: sudo reboot"

echo "Rebooting Raspberry Pi and starting openHAB takes about 5 minutes"

echo "After waiting 5 minutes, open browser and enter the following in URL"

echo " http://?raspberry-pi-ip?:8080/openhab.app?sitemap=demo"

exit 0

Bronnen: github.com *dumbo25 Gebruikte bestanden:

Internet of Things – OpenHAB – Addons

Door Sebastiaan Geplaatst op 2017-11-18 Geplaatst in OpenHAB Getagd met Addons, Domotica, Internet of Things, OpenHAB

Openhab Addons Download OpenHAB1 Addons @ GitHub Download OpenHAB2 Addons @ GitHub

Internet of Things – OpenHAB1 – Voorbeeld menusysteem (sitemap)

Door Sebastiaan Geplaatst op 2017-11-18 Geplaatst in OpenHAB Getagd met Domotica, Internet of Things, OpenHAB, sitemap, things

Duits voorbeeld Stap 1 Maak een demo sitemap aan: /etc/openhab/configurations/sitemaps/mydemo.sitemap sudo nano /etc/openhab/configurations/sitemaps/mydemo.sitemap Met daarin de volgende inhoud:

sitemap mydemo label="Hauptmenue"
{
  Frame {
        Group item=gOG  label="Obergeschoss"    icon="firstfloor"
        Group item=gEG  label="Erdgeschoss"     icon="groundfloor"
        }
}

sitemap mydemo label="Hauptmenue"

{

Frame {

Group item=gOG label="Obergeschoss" icon="firstfloor"

Group item=gEG label="Erdgeschoss" icon="groundfloor"

}

Stap 2 Maak demo items aan: /etc/openhab/configurations/items/mydemo.items sudo nano /etc/openhab/configurations/items/mydemo.items Met daarin de volgende inhoud:

// Gruppen
Group gEG     // Gruppe Erdgeschoss
Group gOG     // Gruppe Obergeschoss
 
Group OG_Schlafzimmer    "Schlafzimmer"    <bedroom>    (gOG)
Group OG_Kinderzimmer1    "Kinderzimmer1"    <boy1>        (gOG)
Group OG_Kinderzimmer2    "Kinderzimmer2"    <child2>    (gOG)
Group OG_Bad        "Bad"        <bath>        (gOG)
 
Group EG_Kueche        "Kueche"     <kitchen>    (gEG)
Group EG_Esszimmer    "Esszimmer"     <child1>     (gEG)
Group EG_WC        "WC"        <bath>        (gEG)
Group EG_Wohnzimmer    "Wohnzimmer"    <sofa>        (gEG)
Group EG_Abstellraum    "Abstellraum"    <wardrobe2>    (gEG)
 
/*Licht*/
Switch Licht_OG_Kinderzimmer1    "Licht Kinderzimmer1"    (OG_Kinderzimmer1)
Switch Licht_OG_Kinderzimmer2    "Licht Kinderzimmer2"    (OG_Kinderzimmer2)
Switch Licht_OG_Bad_Spiegel    "Licht Spiegelschrank"    (OG_Bad)
Switch Licht_EG_Kueche        "Licht Kueche"        (EG_Kueche)
Switch Licht_EG_Esszimmer    "Licht Esszimmer"    (EG_Esszimmer)
Switch Licht_EG_WC        "Licht WC"        (EG_WC)
Switch Licht_EG_Abstellraum    "Licht Abstellraum"    (EG_Abstellraum)
 
/*Dimmer*/
Dimmer Licht_OG_Schlafzimmer    "Licht Schlafzimmer"    (OG_Schlafzimmer)
Dimmer Licht_OG_Bad        "Licht Bad"        (OG_Bad)
Dimmer Licht_EG_Wohnzimmer    "Licht Wohnzimmer"    (EG_Wohnzimmer)

// Gruppen

Group gEG // Gruppe Erdgeschoss

Group gOG // Gruppe Obergeschoss

Group OG_Schlafzimmer "Schlafzimmer" <bedroom> (gOG)

Group OG_Kinderzimmer1 "Kinderzimmer1" <boy1> (gOG)

Group OG_Kinderzimmer2 "Kinderzimmer2" <child2> (gOG)

Group OG_Bad "Bad" <bath> (gOG)

Group EG_Kueche "Kueche" <kitchen> (gEG)

Group EG_Esszimmer "Esszimmer" <child1> (gEG)

Group EG_WC "WC" <bath> (gEG)

Group EG_Wohnzimmer "Wohnzimmer" <sofa> (gEG)

Group EG_Abstellraum "Abstellraum" <wardrobe2> (gEG)

/*Licht*/

Switch Licht_OG_Kinderzimmer1 "Licht Kinderzimmer1" (OG_Kinderzimmer1)

Switch Licht_OG_Kinderzimmer2 "Licht Kinderzimmer2" (OG_Kinderzimmer2)

Switch Licht_OG_Bad_Spiegel "Licht Spiegelschrank" (OG_Bad)

Switch Licht_EG_Kueche "Licht Kueche" (EG_Kueche)

Switch Licht_EG_Esszimmer "Licht Esszimmer" (EG_Esszimmer)

Switch Licht_EG_WC "Licht WC" (EG_WC)

Switch Licht_EG_Abstellraum "Licht Abstellraum" (EG_Abstellraum)

/*Dimmer*/

Dimmer Licht_OG_Schlafzimmer "Licht Schlafzimmer" (OG_Schlafzimmer)

Dimmer Licht_OG_Bad "Licht Bad" (OG_Bad)

Dimmer Licht_EG_Wohnzimmer "Licht Wohnzimmer" (EG_Wohnzimmer)

Stap 3 Benader de sitemap via ip/link: http://192.168.X.X:8080/openhab.app?sitemap=mydemo Voorbeeld:

Internet of Things – OpenHAB1 – Installeren op de Raspberry Pi

Door Sebastiaan Geplaatst op 2017-11-16 Geplaatst in OpenHAB Getagd met Domotica, Internet of Things, OpenHAB

Website Stap 1 – Installatie van Java Raspberry Pi – Software – Java installeren Stap 2 – OpenHAB installeren – Installeer de pgp sleutel: wget -qO - 'https://bintray.com/user/downloadSubjectPublicKey?username=openhab' | apt-key add - – Voeg OpenHAB toe aan de repolijst: echo "deb http://dl.bintray.com/openhab/apt-repo stable main" > /etc/apt/sources.list.d/openhab.list – Update de repolijst: apt-get update

Get:1 http://ppa.launchpad.net/webupd8team/java/ubuntu trusty InRelease [15.5 kB]
Hit:2 http://archive.raspberrypi.org/debian stretch InRelease
Hit:3 http://mirrordirector.raspbian.org/raspbian stretch InRelease
Ign:4 http://dl.bintray.com/openhab/apt-repo stable InRelease
Get:5 http://dl.bintray.com/openhab/apt-repo stable Release [6,051 B]
Get:6 http://dl.bintray.com/openhab/apt-repo stable Release.gpg [821 B]
Ign:1 http://ppa.launchpad.net/webupd8team/java/ubuntu trusty InRelease
Get:7 http://dl.bintray.com/openhab/apt-repo stable/main armhf Packages [77.8 kB]
Fetched 100 kB in 1s (54.5 kB/s)
Reading package lists... Done
W: GPG error: http://ppa.launchpad.net/webupd8team/java/ubuntu trusty InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY C2518248EEA14886
W: The repository 'http://ppa.launchpad.net/webupd8team/java/ubuntu trusty InRelease' is not signed.
N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.
N: See apt-secure(8) manpage for repository creation and user configuration details.

Get:1 http://ppa.launchpad.net/webupd8team/java/ubuntu trusty InRelease [15.5 kB]

Hit:2 http://archive.raspberrypi.org/debian stretch InRelease

Hit:3 http://mirrordirector.raspbian.org/raspbian stretch InRelease

Ign:4 http://dl.bintray.com/openhab/apt-repo stable InRelease

Get:5 http://dl.bintray.com/openhab/apt-repo stable Release [6,051 B]

Get:6 http://dl.bintray.com/openhab/apt-repo stable Release.gpg [821 B]

Ign:1 http://ppa.launchpad.net/webupd8team/java/ubuntu trusty InRelease

Get:7 http://dl.bintray.com/openhab/apt-repo stable/main armhf Packages [77.8 kB]

Fetched 100 kB in 1s (54.5 kB/s)

Reading package lists... Done

W: GPG error: http://ppa.launchpad.net/webupd8team/java/ubuntu trusty InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY C2518248EEA14886

W: The repository 'http://ppa.launchpad.net/webupd8team/java/ubuntu trusty InRelease' is not signed.

N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.

N: See apt-secure(8) manpage for repository creation and user configuration details.

– …

Internet of Things – OpenHAB1 – Installeren op de Raspberry Pi Lees meer »

Zoeken

Categorie: OpenHAB

Internet of Things – OpenHAB 2 – Installeren op de Raspberry Pi (UAI)

Internet of Things – OpenHAB1 – MySQL (persistence)

Internet of Things – OpenHAB1 – Aansturen GPIO

Internet of Things – OpenHAB1 – HABmin (addon)

Internet of Things – OpenHAB1 – Installeren op de Raspberry Pi (UAI)

Internet of Things – OpenHAB – Addons

Internet of Things – OpenHAB1 – Voorbeeld menusysteem (sitemap)

Internet of Things – OpenHAB1 – Installeren op de Raspberry Pi