JST – Molex en meer connectoren

Hieronder vind je een lijstje met JST, Molex en andere connectoren, puur ter indentificatie.

Tabel overzicht

Veelgebruikte naam:Specificatie:Pitch:Pin type
MolexMolex PicoBlade1.25mmBlade (rectangle)
Molex BatteryMolex 2P2.0mmSpade
Molex MotorMolex 3P2.0mmSpade
Molex KKMolex KK??
MCPX ConnectorJST-PH2.0mmSquare Pin
JST Micro BatteryJST-SH 2P1.0mmBlade (rectangle)
JST-SHJST-SH1.0mmBlade (rectangle)
JST-ZHJST-ZH1.5mmPole (Round Pin)
JST-XHJST-XH2.54mm?
JST-EHJST-EH2.54mm?
Flightpower (FP) / Thunderpower (TP)Flightpower (FP) / Thunderpower (TP)??
Hyperion (HP) / Polyquest (PQ)Hyperion (HP) / Polyquest (PQ)??

JST Micro Battery / JST-SH 2P

The JST SH 2 pin connector is a specialist connector. It’s not commonly used to connect power to receivers, but is often the connector of choice for other peripherals such as FPV units and batteries for cameras. The JST-SH is also commonly used on Flight Controllers but in higher pin counts such as 4 and 8 pin.This connector’s main distinguishing feature is the wide lugs at the back of the connector which differentiate it from the similar Molex power leads.


Molex 1.25mm 2P

The Molex 1.25mm 2P battery connector is possibly the most common type of battery connector used in RC products. It has, over time become the connector of choice for RC manufacturers of receiver boards as well as batteries. It was originally introduced by E-flight for use in their BNF Ultra Micros such as the Vapor and PT17. As shown in the image at the bottom of the page, this connector is used in the popular NanoTech brand of batteries and embedded in the battery case. The receptor is available as both surface mount and inline types which have leads attached. This connector is often confused with the MCPX (PH2.0) connector, however the distinguishing feature of this Molex connector is its blade shaped pins and locating lugs which slide into slots in the sides of the receptor.

 


Molex 2.0mm 2P

The Molex 2.0mm 2P Connector has become a popular battery connector for many RC toy manufacturers because of its easy operation (plug and unplug) and plainly visible connection orientation. It’s technical specification is “Molex 51005/6-0200”, Please be aware that different manufacturers may wire this connector in opposite ways, so be sure to check the actual polarity your system requires instead of just trusting the wire colour. This connector is commonly used by manufacturers and products such as Losi, Skytec, Walkera (Ladybird), Hubsan , Mini CP and Genius CP. It’s a slightly larger battery connector than other micro RC connectors and its leads are commonly thicker as well. This connector is easily distinguishable by its spade type connector pins.

 


Molex 2.0mm 3P

The Molex 2.0mm 3P Connector is a popular brushless motor connector because of its easy operation (plug and unplug). It’s technical specification is “Molex 51005”, Some manufacturers may wire this connector in with black, read and a coloured wire, however for connecting three phase brushless motors there is no correct polarity requirement. This connector is easily distinguishable by its spade type connector pins.


JST-PH 2.0mm Battery Connector

The JST PH 2.0mm battery connector is more commonly referred to in Micro RC as an MCP or MCPX connector, taking its common name from the RC product which it was first used on. However, in other electronics fields it goes by its correct name JST PH 2.0 2P. This battery connector is more robust than the popular Molex battery connector and used in RC vehicles which require a battery of 200mah and over. The connector is easily distinguishable by its pin shape which are square and also a single ridge and slot type positioning system on the top of the connector. A common example of a battery with this type of connector is shown in the images below.


JST-SH 3 Pin

The JST SH 3 pin connector most commonly comes in two wiring types – Brown, Red, Orange which is the format extensively used by HobbyKing products as well as many Chinese based brands. For example, this connector and wiring configuration is used in the HobbyKing SuperMicro series as well as on micro Lemon Rx DSM2 Compatible receivers and DelTang receivers. However, another common wiring configuration is Black, Red, White and this is most commonly used on servos.

In general, almost all linear servos will have this connector type, as will the receivers designed for such servos like the Spektrum AR6400 series. The main distinguishing feature of this connector is the extra wide lugs at the back of the housing which make it easily identifiable compared to the similar looking Molex Picoblade connector.


JST-ZH 3 Pin

The JST ZH connector is the largest of the common micro connectors with a pin spacing of 1.5mm. It is also the only connector to have round (pole) pins, a feature which makes it easily recognisable and distinguishes it from other similar connectors. This connector is commonly found in use on some Spektrum receivers such as the AR 6300 and also on the DelTang DT Rx35d and LemonRx LM 6Ch ZH. The BlueArrow range of micro servos also widely uses this type of connector.

Please note that while other RC connectors commonly have Positive on the centre pin, the convention for the ZH connector is to have Ground on the centre pin. Care should be taken when using this connector and you should always check the actual polarity on the leads and not just rely on the lead colour.


JST-XH

2.5mm pin spacing (same as 0.1inch for all practical purposes)
Not micro size but very common. Used in most balance plugs on LiPos and is the “standard” header spacing in many electronic components including PCs. The standard Futaba/JR style servo plugs are this spacing.


JST-EH

The JST EH series of compact 2.5mm pitch crimp style socket housings are ideal for high density connections to PCBs. The assembled connectors offer low contact resistance and high reliability and can be used with either crimp style or insulation displacement configuration HR connectors.The housings are available in 2 to 15 way formats. Use BEH-001T crimp contacts, see stock no. 311-6439 For suitable mating headers see stock number 515-1383 typical


Flightpower (FP) / Thunderpower (TP)


Hyperion (HP) / Polyquest (PQ)


Molex KK


Bronnen:
micronwings.com
rcgroups.com
fi.eurorc.com

Top