(AVM) EVA Revision: 1.347 Version: 1347
(C) Copyright 2005 AVM Date: Sep 20 2007 Time: 11:14:07 (0) 2 0x0-0x41F
[FLASH:] SPANSION Top-MirrorBit-Flash 8MB 32 Bytes WriteBuffer
[FLASH:](Eraseregion [0] 127 sectors a 64kB)
[FLASH:](Eraseregion [1] 8 sectors a 8kB)
[SYSTEM:] OHIO on 211MHz/125MHz
Eva_AVM >AVM decompress Kernel:
..................executeProgram on 0x941EB000
[ohio_pre_init] System Clk = 62500000 Hz
LINUX started...
Linux version 2.6.13.1-ohio (1699) (gcc-Version 3.4.6) #1 Thu Jun 25 13:14:17 CEST 2009
memsize=32 MByte
flashsize=8 MByte
&_end=0x9423ee74 PFN_ALIGN(&_end)=0x9423f000 CPHYSADDR(PFN_ALIGN(&_end))=0x1423f000 memsize=0x2000000
CPU revision is: 00018448
[ohio_gpio_init]
Determined physical RAM map:
memory: 0023f000 @ 14000000 (reserved)
memory: 01dc1000 @ 1423f000 (usable)
On node 0 totalpages: 8192
[alloc_node_mem_map] reduce size from 2883616 Bytes to 262176 Bytes
[alloc_node_mem_map]: (org) sizeof(mem_map) = 262176 mem_map=0x94242000-0x94282020
[alloc_node_mem_map]: sizeof(mem_map) = 2883616 mem_map=0x93fc2000-0x94282020
zone=0 zone_size[j]=0x90112
realsize=8192
DMA zone: 8192 pages, LIFO batch:3
zone=1 zone_size[j]=0x0
realsize=0
Normal zone: 0 pages, LIFO batch:1
zone=2 zone_size[j]=0x0
realsize=0
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: console=ttyS0,38400n8r
[ld_mmu_r4xx0] memcpy((void *)(CAC_BASE + 0x100), &except_vec2_generic, 0x30)
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 8kB, 4-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions). Base=0x9420578c
TLB synthesizer field overflow (simm)
Synthesized TLB load handler fastpath (34 instructions) Base=0x94208620.
TLB synthesizer field overflow (simm)
Synthesized TLB store handler fastpath (34 instructions) Base=0x94208820.
TLB synthesizer field overflow (simm)
Synthesized TLB modify handler fastpath (33 instructions) Base=0x94208a20.
PID hash table entries: 256 (order: 8, 4096 bytes)
CPU frequency 211.97 MHz
Using 105.984 MHz high precision timer.
[setup_irq]: irq 255 irqaction->handler 0x940430c0 (no_action+0x0/0x8 )
[register_console] enable commandline console 0
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 30092k/30468k available (1582k kernel code, 320k reserved, 377k data, 112k init, 0k highmem)
totalram_pages= 7537
Calibrating delay loop... 211.35 BogoMIPS (lpj=1056768)
loops_per_jiffy=1056768
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
Can't analyze prologue code at 9418a174
Squashfs 2.2-r2b (released 2006/02/23) (C) 2002-2005 Phillip Lougher
avm_net_trace: Up and running.
[avm_power]Ohio250 detected -> overclocking possible
[avm] configured: watchdog eventled enable shift register enable direct gpio
gpio usage: reset=12 clock=13 store=10 data=9
AR7WDT: Watchdog Driver for AR7 Hardware (Version 1.0, build: Jun 25 2009 13:11:54)
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
[uart_add_one_port]
ttyS0 at MMIO 0x0 (irq = 15) is a OHIO_UART
[uart_add_one_port] dont register console port->type = 16
port->cons = 0x941c9fe0 port->cons->flags = 0x7
[uart_add_one_port] success
io scheduler noop registered
[cpmac] Version: URL: svn://EmbeddedVM/home/SVN/drivers/cpmac/tags/1.98-r684-trunk-AR8216_MC - Revision 538:685 - Do 25. Jun 13:13:00 CEST 2009
[avm_event_source_trigger]: not registered
[cpmac] [cpmac_if_register] dev cpmac0 (phy_id 0) registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
physmap flash device: 400000 at 10000000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
phys_mapped_flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
RedBoot partition parsing not available
Generic platform RAM MTD, (c) 2004 Simtec Electronics
Ohio flash driver (size->0x400000 mem->0x10000000)
flash_size=0x800000
flash_mask=0xffffff
Ohio flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
[genprobe_ident_chips] 4 i 0 j 0
[genprobe_ident_chips] 5 i 0 j 1
Amd/Fujitsu Extended Query Table at 0x0040
Ohio flash memory: Swapping erase regions for broken CFI table.
number of CFI chips: 1
[mtd]: jffs2_size = 19 * 64KByte (0x130000 Bytes)
[ohio_find_hidden_filesystem]: super block found: bytes_used: 0x594263/5849699
[init_ohio_flash] find hidden filesystem size=0x6c8d00 offset=0xb7300
[mtd] configure jffs2 partition
[mtd] fs_size=0x640000 max=0x130000 is=0x130000 max jffs2_size value 19
[mtd] ohio_flash_map: name=Ohio flash memory bankwidth=2 virt=0xb0000000 phys=0x10000000 size=0x800000
Creating 7 MTD partitions on "Ohio flash memory":
0x000b7300-0x00780000 : "filesystem"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
mtd: partition "filesystem" doesn't start on an erase block boundary -- force read-only
0x00010000-0x00780000 : "kernel"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x00000000-0x00010000 : "bootloader"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x00780000-0x007c0000 : "tffs (1)"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x007c0000-0x00800000 : "tffs (2)"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x00650000-0x00780000 : "jffs2"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x00010000-0x00650000 : "Kernel without jffs2"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
partition_info[0]: name=filesystem offset=b7300 size=6c8d00
partition_info[0]: 0xb00b7300: 0x73717368 0x756
partition_info[1]: name=kernel offset=10000 size=770000
partition_info[1]: 0xb0010000: 0xfeed1281 0xa72cc
partition_info[2]: name=bootloader offset=0 size=10000
partition_info[2]: 0xb0000000: 0x40809000 0x40809800
partition_info[3]: name=tffs (1) offset=780000 size=40000
partition_info[3]: 0xb0780000: 0x40001 0xfbffffff
partition_info[4]: name=tffs (2) offset=7c0000 size=40000
partition_info[4]: 0xb07c0000: 0x40001 0xfcffffff
partition_info[5]: name=jffs2 offset=650000 size=130000
partition_info[5]: 0xb0650000: 0x20031985 0xc
partition_info[6]: name=Kernel without jffs2 offset=10000 size=640000
partition_info[6]: 0xb0010000: 0xfeed1281 0xa72cc
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
mcfw: IGMPv3 fast forwarding
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
[setup_irq]: irq 1 irqaction->handler 0x94001590 (dummy_timer_irq+0x0/0x14 )
[setup_irq]: irq 6 irqaction->handler 0x940015a4 (dummy_system_irq_2+0x0/0x14 )
[ohio_late_init]
[avm_new] push_button_gpio=8 value=1 enabled
TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
mount on mtd4 and mtd5 (double buffering)
Adam2 environment variables API installed.
[prepare_namespace] new mount root /dev/mtdblock1
use lzma compression
VFS: Mounted root (squashfs filesystem) readonly.
Freeing prom memory: 0kb freed
Freeing unused kernel memory: 112k freed (7565 free)
[setup_irq]: irq 15 irqaction->handler 0x940da99c (serial8250_interrupt+0x0/0x13c )
init started: BusyBox v1.8.2 (2008-09-04 11:11:03 CEST)
starting pid 99, tty '/dev/console': '/etc/init.d/rc.S'
AR7WDT: System Init UEberwachung 240 Sekunden
TFFS Name Table E
HWRevision 127.1.1.0
ProductID Fritz_Box_7170_AnnexA
SerialNumber 0000000000000000
annex A
autoload yes
bootloaderVersion 1.347
bootserport tty0
country 031
cpufrequency 211968000
firstfreeaddress 0x946C0D14
firmware_version avme
firmware_info 58.04.68
flashsize 0x00800000
jffs2_size 19
maca 00:1C:4A:26:AE:10
macb 00:1C:4A:26:AE:11
macwlan 00:1C:4A:07:96:72
macdsl 00:1C:4A:26:AE:12
memsize 0x02000000
modetty0 38400,n,8,1,hw
modetty1 38400,n,8,1,hw
mtd0 0x90000000,0x90000000
mtd1 0x90010000,0x90780000
mtd2 0x90000000,0x90010000
mtd3 0x90780000,0x907C0000
mtd4 0x907C0000,0x90800000
my_ipaddress 192.168.178.1
prompt Eva_AVM
ptest
req_fullrate_freq 125000000
sysfrequency 125000000
tr069_passphrase XYJkubNKuSsf
tr069_serial 00040E-001C4A26AE10
urlader-version 1347
usb_board_mac 00:1C:4A:26:AE:13
usb_rndis_mac 00:1C:4A:26:AE:14
usb_device_id 0x3D00
usb_revision_id 0x0200
usb_device_name USB DSL Device
usb_manufacturer_name AVM
wlan_key 7411555752548263
wlan_cal 0006,03F3,0012,00F3,010A,00F6,010A,0352,0349
mknod: /var/flash/ar7.cfg: File exists
Piglet: module license '
(C) Copyright 2005 by AVM
' taints kernel.
EMIF: asize=1 ta=3 r_hold=0 w_strobe=6 r_strobe=6 ew=1
[piglet]McSP: rFS: 8000 Hz rCLK:2048285 Hz
[avm_new]push_button 'Wlan-Taster', released: GPIO=8 presses=5000 key=button_key_2
[jffs2] xx=mtd6: 00130000 00010000 "jffs2"
[jffs2] i=mtd6:
[jffs2] jffs2_pat=6
[jffs2] i=00130000
[jffs2] jffs2_size=19
[jffs2] i=00010000
[jffs2] i="jffs2"
[jffs2] load jffs2 module
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
[jffs2] mount jffs
[jffs2] write env variable jffs2_size to 19
TAM: create JFFS2 directory /data/tam
attempting to load DSL Firmware '/lib/modules/microvoip-dsl.bin'
**** ANNEX: 'A'
*************************************
setting DSL Firmware to Annex A
registered device TI Avalanche SAR
tiatm driver (patch_annex=0xc00e40cc)
[tiatm] Set StrictPriority=0
DSP binary filesize = 389206 bytes
[dsl_ur8] dsl serial number successfully set to "465249545a21426f7820466f6e20574c414e2037093030314334413236414531"
[tiatm] INFO V2U-BRIDGEREGISTER: 0x00000019
[avm_power]Ohio250 detected -> overclocking possible
[avm_power]#### boostVoltage: DSP Core voltage set to 1,5 V ####
[setup_irq]: irq 23 irqaction->handler 0xc00ca208 (tn7atm_sar_irq+0x0/0x30 [tiatm] )
[setup_irq]: irq 31 irqaction->handler 0xc00ca238 (tn7atm_dsl_irq+0x0/0x28 [tiatm] )
[tiatm]: Powermanagment (States => 1,3,10) supported!
[tiatm] AvmInterface length: 44
[avm_power]#### boostVoltage: DSP Core voltage set to 1,65 V ####
Texas Instruments ATM driver: version:[4.08.00.00]
ubik2 driver (ubik2 - 0x10=0xc003efd4)
atm_dsp_register_ubik2: ubik2_ToMIPS_notify=0xc002cbfc
atm_dsp_register_ubik2: dsp mem pointer 0xa1c1644c
ubik2_init_interface: DSP-Link Version v3 8480
[4294938485][isdn]svn:2592
driver params overwritten io_addr=0x0 irq_num=0
[setup_irq]: irq 28 irqaction->handler 0xC0037AF0 (soft_interrupt_handler+0x0/0x30 [ubik2] )
[4294938487]CPU-Clk: 105 * 2 MHz
[4294938661]DSP-Fw: Version 3.390] EC=0 DTMF=0 Slots=10 BChan=8(Analog=4) DChan=2 Fifo=128 Bitfile: EMIF
capicodec_init()
[capi_codec] support fax
[capi_codec] support Codecs
usbcore: registered new driver usbfs
usbcore: registered new driver hub
AHCI RevisionID = 0x02, RamSize = 16384, NumPorts= 1
[setup_irq]: irq 9 irqaction->handler 0xC00BF490 (ahci_irq+0x0/0x880 [usbahcicore] )
ahci : new USB bus registered, assigned bus number 1
AVM USB 1.1 Host started
kdsldmod: init start (Jun 25 2009 15:01:21) sizeof(struct sk_buff)=176
kdsldmod: init done
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
MAC WLAN: 00:1C:4A:07:96:72
WLAN is not enabled
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCGIFFLAGS: No such device
/etc/init.d/rc.net: line 379: websrv: not found
[4294939660]DSP: XDU=0( ) OVR=0 MIPS_OVR=5
[setup_irq]: irq 27 irqaction->handler 0x940EB40C (cpmac_main_isr+0x0/0x78 )
checkempty: : No such file or directory
[cpmac] cpmac_main_ioctl, unknown ioctl 35142
device cpmac0 entered promiscuous mode
device eth0 entered promiscuous mode
lan: port 1(eth0) entering learning state
lan: topology change detected, propagating
lan: port 1(eth0) entering forwarding state
[tiatm]: error getting DSL parametrization interface for read operation!
[avm_power] : ethernet port 0 status 2
[avm_power] : ethernet port 1 status 1
[avm_power] : ethernet port 2 status 1
[avm_power] : ethernet port 3 status 1
Jan 1 01:00:27 telefon[354]: use clock_gettime(CLOCK_MONOTONIC)!
Jan 1 01:00:28 telefon[354]: SIGCHLD received!
Jan 1 01:00:28 telefon[354]: WARNING No config file '/var/flash/fx_def' !
create sema UPNPAPI_DATA_phonebook
/etc/init.d/rc.S: line 1366: /etc/init.d/rc.media: not found
run_clock demon started
AR7WDT: System Init UEberwachung abgeschlossen (212950 ms noch verfuegbar)
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_cpuclock: norm_power_rate=100 act_rate=99 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=0 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_dspclock: norm_power_rate=100 act_rate=100 mul=154 div=10 offset=974 NormP=2514 mW -> SumNormP=2514 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_systemclock: norm_power_rate=100 act_rate=83 mul=65 div=10 offset=1793 NormP=2443 mW -> SumNormP=4957 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_wlan: norm_power_rate=100 act_rate=0 mul=84 div=10 offset=100 NormP=940 mW -> SumNormP=5897 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_isdnnt: norm_power_rat
Please press Enter to activate this console. [4294940661]DSP: XDU=0( ) OVR=0 MIPS_OVR=2
cat: read error: Broken pipe
