PHP - COM poort communicatie

Hieronder vind je een voorbeeld om via PHP met een COM poort te communiceren.

Simpel

Hieronder een vrij simpele oplossing met FOPEN:

(er is een trucje om een compoort hoger als 10 aan te roepen)

<?php

$fp = fopen("COM12", "wb+");

// COM poorten hoger dan 10, als volgt aanroepen:
// $fp = fopen("\\\\.\\COM12", "wb+");

if (!$fp) {
   echo "Niet open";
} else {
   echo "Open";
}

fwrite($fp, "040732090878007800\r");

// of PUTS te gebruiken
//fputs($fp, "040732090878007800\r");

fclose($fp);

?>

<?php

$fp = fopen("COM12", "wb+");

// COM poorten hoger dan 10, als volgt aanroepen:

// $fp = fopen("\\\\.\\COM12", "wb+");

if (!$fp) {

echo "Niet open";

} else {

echo "Open";

}

fwrite($fp, "040732090878007800\r");

// of PUTS te gebruiken

//fputs($fp, "040732090878007800\r");

fclose($fp);

Met een CLASS script

Dit script kan alleen com poorten t/m 10 aan, een COM poort hoger dan 10 kan niet met dit script uitgevoerd worden (bovenstaand trucje werkt niet)

<?php 
include "php_serial.class.php"; 

// Let's start the class 
$serial = new phpSerial(); 

// First we must specify the device. This works on both linux and windows (if 
// your linux serial device is /dev/ttyS0 for COM1, etc) 
$serial->deviceSet("COM15"); 

// Set for 9600-8-N-1 (no flow control)
$serial->confBaudRate(9600); //Baud rate: 9600
$serial->confParity("none");
$serial->confCharacterLength(8);
$serial->confStopBits(1);
$serial->confFlowControl("none");

echo "test...";

// Then we need to open it 
$serial->deviceOpen(); 

// Read data
$serial->sendMessage("040732090878007800\r");

//$read = "NAN";
$read = $serial->readPort(); 

// Print out the data
echo $read; 

// If you want to change the configuration, the device must be closed 
$serial->deviceClose(); 
?>

<?php

include "php_serial.class.php";

// Let's start the class

$serial = new phpSerial();

// First we must specify the device. This works on both linux and windows (if

// your linux serial device is /dev/ttyS0 for COM1, etc)

$serial->deviceSet("COM15");

// Set for 9600-8-N-1 (no flow control)

$serial->confBaudRate(9600); //Baud rate: 9600

$serial->confParity("none");

$serial->confCharacterLength(8);

$serial->confStopBits(1);

$serial->confFlowControl("none");

echo "test...";

// Then we need to open it

$serial->deviceOpen();

// Read data

$serial->sendMessage("040732090878007800\r");

//$read = "NAN";

$read = $serial->readPort();

// Print out the data

echo $read;

// If you want to change the configuration, the device must be closed

$serial->deviceClose();

<?php
define ("SERIAL_DEVICE_NOTSET", 0);
define ("SERIAL_DEVICE_SET", 1);
define ("SERIAL_DEVICE_OPENED", 2);

/**
 * Serial port control class
 *
 * THIS PROGRAM COMES WITH ABSOLUTELY NO WARANTIES !
 * USE IT AT YOUR OWN RISKS !
 * 
 * Changes added by Rizwan Kassim <rizwank@uwink.com> for OSX functionality
 * Further changes for OSX functionality added by Andrew Hutchings <andrew.hutchings@gmail.com>
 * default serial device for osx devices is /dev/tty.serial for machines with a built in serial device
 *
 * @author Rémy Sanchez <thenux@gmail.com>
 * @thanks Aurélien Derouineau for finding how to open serial ports with windows
 * @thanks Alec Avedisyan for help and testing with reading
 * @copyright under GPL 2 licence
 */
class phpSerial
{
    var $_device = null;
    var $_windevice = null;
    var $_dHandle = null;
    var $_dState = SERIAL_DEVICE_NOTSET;
    var $_buffer = "";
    var $_os = "";

    /**
     * This var says if buffer should be flushed by sendMessage (true) or manualy (false)
     *
     * @var bool
     */
    var $autoflush = true;

    /**
     * Constructor. Perform some checks about the OS and setserial
     *
     * @return phpSerial
     */
    function phpSerial ()
    {
        setlocale(LC_ALL, "en_US");

        $sysname = php_uname();

        if (substr($sysname, 0, 5) === "Linux")
        {
            $this->_os = "linux";

            if($this->_exec("stty --version") === 0)
            {
                register_shutdown_function(array($this, "deviceClose"));
            }
            else
            {
                trigger_error("No stty availible, unable to run.", E_USER_ERROR);
            }
        }
        elseif (substr($sysname, 0, 6) === "Darwin")
        {
            $this->_os = "osx";

            if($this->_exec("stty") === 0)
            {
                register_shutdown_function(array($this, "deviceClose"));
            }
            else
            {
                trigger_error("No stty availible, unable to run.", E_USER_ERROR);
            }

        }
        elseif(substr($sysname, 0, 7) === "Windows")
        {
            $this->_os = "windows";
            register_shutdown_function(array($this, "deviceClose"));
        }
        else
        {
            trigger_error("Host OS is neither osx, linux nor windows, unable to run.", E_USER_ERROR);
            exit();
        }
    }

    //
    // OPEN/CLOSE DEVICE SECTION -- {START}
    //

    /**
     * Device set function : used to set the device name/address.
     * -> linux : use the device address, like /dev/ttyS0
     * -> osx : use the device address, like /dev/tty.serial
     * -> windows : use the COMxx device name, like COM1 (can also be used
     *     with linux)
     *
     * @param string $device the name of the device to be used
     * @return bool
     */
    function deviceSet ($device)
    {
        if ($this->_dState !== SERIAL_DEVICE_OPENED)
        {
            if ($this->_os === "linux")
            {
                if (preg_match("@^COM(\d+):?$@i", $device, $matches))
                {
                    $device = "/dev/ttyS" . ($matches[1] - 1);
                }

                if ($this->_exec("stty -F " . $device) === 0)
                {
                    $this->_device = $device;
                    $this->_dState = SERIAL_DEVICE_SET;
                    return true;
                }
            }
            elseif ($this->_os === "osx")
            {

                if (preg_match("@^COM(\d+):?$@i", $device, $matches))
                {
                    $device = "/dev/ttyS" . ($matches[1] - 1);
                }

                if ($this->_exec("stty -f " . $device) === 0)
                {
                    $this->_device = $device;
                    $this->_dState = SERIAL_DEVICE_SET;
                    return true;
                }
            }
            elseif ($this->_os === "windows")
            {
                if (preg_match("@^COM(\d+):?$@i", $device, $matches) and $this->_exec(exec("mode " . $device)) === 0)
                {
                    $this->_windevice = "COM" . $matches[1];
                    $this->_device = "\\.\com" . $matches[1];
                    $this->_dState = SERIAL_DEVICE_SET;
                    return true;
                }
            }

            trigger_error("Specified serial port is not valid", E_USER_WARNING);
            return false;
        }
        else
        {
            trigger_error("You must close your device before to set an other one", E_USER_WARNING);
            return false;
        }
    }

    /**
     * Opens the device for reading and/or writing.
     *
     * @param string $mode Opening mode : same parameter as fopen()
     * @return bool
     */
    function deviceOpen ($mode = "r+b")
    {
        if ($this->_dState === SERIAL_DEVICE_OPENED)
        {
            trigger_error("The device is already opened", E_USER_NOTICE);
            return true;
        }

        if ($this->_dState === SERIAL_DEVICE_NOTSET)
        {
            trigger_error("The device must be set before to be open", E_USER_WARNING);
            return false;
        }

        if (!preg_match("@^[raw]\+?b?$@", $mode))
        {
            trigger_error("Invalid opening mode : ".$mode.". Use fopen() modes.", E_USER_WARNING);
            return false;
        }

        $this->_dHandle = @fopen($this->_device, $mode);

        if ($this->_dHandle !== false)
        {
            stream_set_blocking($this->_dHandle, 0);
            $this->_dState = SERIAL_DEVICE_OPENED;
            return true;
        }

        $this->_dHandle = null;
        trigger_error("Unable to open the device", E_USER_WARNING);
        return false;
    }

    /**
     * Closes the device
     *
     * @return bool
     */
    function deviceClose ()
    {
        if ($this->_dState !== SERIAL_DEVICE_OPENED)
        {
            return true;
        }

        if (fclose($this->_dHandle))
        {
            $this->_dHandle = null;
            $this->_dState = SERIAL_DEVICE_SET;
            return true;
        }

        trigger_error("Unable to close the device", E_USER_ERROR);
        return false;
    }

    //
    // OPEN/CLOSE DEVICE SECTION -- {STOP}
    //

    //
    // CONFIGURE SECTION -- {START}
    //

    /**
     * Configure the Baud Rate
     * Possible rates : 110, 150, 300, 600, 1200, 2400, 4800, 9600, 38400,
     * 57600 and 115200.
     *
     * @param int $rate the rate to set the port in
     * @return bool
     */
    function confBaudRate ($rate)
    {
        if ($this->_dState !== SERIAL_DEVICE_SET)
        {
            trigger_error("Unable to set the baud rate : the device is either not set or opened", E_USER_WARNING);
            return false;
        }

        $validBauds = array (
            110    => 11,
            150    => 15,
            300    => 30,
            600    => 60,
            1200   => 12,
            2400   => 24,
            4800   => 48,
            9600   => 96,
            19200  => 19,
            38400  => 38400,
            57600  => 57600,
            115200 => 115200
        );

        if (isset($validBauds[$rate]))
        {
            if ($this->_os === "linux")
            {
                $ret = $this->_exec("stty -F " . $this->_device . " " . (int) $rate, $out);
            }
            if ($this->_os === "osx")
            {
                $ret = $this->_exec("stty -f " . $this->_device . " " . (int) $rate, $out);
            }
            elseif ($this->_os === "windows")
            {
                $ret = $this->_exec("mode " . $this->_windevice . " BAUD=" . $validBauds[$rate], $out);
            }
            else return false;

            if ($ret !== 0)
            {
                trigger_error ("Unable to set baud rate: " . $out[1], E_USER_WARNING);
                return false;
            }
        }
    }

    /**
     * Configure parity.
     * Modes : odd, even, none
     *
     * @param string $parity one of the modes
     * @return bool
     */
    function confParity ($parity)
    {
        if ($this->_dState !== SERIAL_DEVICE_SET)
        {
            trigger_error("Unable to set parity : the device is either not set or opened", E_USER_WARNING);
            return false;
        }

        $args = array(
            "none" => "-parenb",
            "odd"  => "parenb parodd",
            "even" => "parenb -parodd",
        );

        if (!isset($args[$parity]))
        {
            trigger_error("Parity mode not supported", E_USER_WARNING);
            return false;
        }

        if ($this->_os === "linux")
        {
            $ret = $this->_exec("stty -F " . $this->_device . " " . $args[$parity], $out);
        }
        elseif ($this->_os === "osx")
        {
            $ret = $this->_exec("stty -f " . $this->_device . " " . $args[$parity], $out);
        }
        else
        {
            $ret = $this->_exec("mode " . $this->_windevice . " PARITY=" . $parity{0}, $out);
        }

        if ($ret === 0)
        {
            return true;
        }

        trigger_error("Unable to set parity : " . $out[1], E_USER_WARNING);
        return false;
    }

    /**
     * Sets the length of a character.
     *
     * @param int $int length of a character (5 <= length <= 8)
     * @return bool
     */
    function confCharacterLength ($int)
    {
        if ($this->_dState !== SERIAL_DEVICE_SET)
        {
            trigger_error("Unable to set length of a character : the device is either not set or opened", E_USER_WARNING);
            return false;
        }

        $int = (int) $int;
        if ($int < 5) $int = 5;
        elseif ($int > 8) $int = 8;

        if ($this->_os === "linux")
        {
            $ret = $this->_exec("stty -F " . $this->_device . " cs" . $int, $out);
        }
        elseif ($this->_os === "osx")
        {
            $ret = $this->_exec("stty -f " . $this->_device . " cs" . $int, $out);
        }
        else
        {
            $ret = $this->_exec("mode " . $this->_windevice . " DATA=" . $int, $out);
        }

        if ($ret === 0)
        {
            return true;
        }

        trigger_error("Unable to set character length : " .$out[1], E_USER_WARNING);
        return false;
    }

    /**
     * Sets the length of stop bits.
     *
     * @param float $length the length of a stop bit. It must be either 1,
     * 1.5 or 2. 1.5 is not supported under linux and on some computers.
     * @return bool
     */
    function confStopBits ($length)
    {
        if ($this->_dState !== SERIAL_DEVICE_SET)
        {
            trigger_error("Unable to set the length of a stop bit : the device is either not set or opened", E_USER_WARNING);
            return false;
        }

        if ($length != 1 and $length != 2 and $length != 1.5 and !($length == 1.5 and $this->_os === "linux"))
        {
            trigger_error("Specified stop bit length is invalid", E_USER_WARNING);
            return false;
        }

        if ($this->_os === "linux")
        {
            $ret = $this->_exec("stty -F " . $this->_device . " " . (($length == 1) ? "-" : "") . "cstopb", $out);
        }
        if ($this->_os === "osx")
        {
            $ret = $this->_exec("stty -f " . $this->_device . " " . (($length == 1) ? "-" : "") . "cstopb", $out);
        }
        else
        {
            $ret = $this->_exec("mode " . $this->_windevice . " STOP=" . $length, $out);
        }

        if ($ret === 0)
        {
            return true;
        }

        trigger_error("Unable to set stop bit length : " . $out[1], E_USER_WARNING);
        return false;
    }

    /**
     * Configures the flow control
     *
     * @param string $mode Set the flow control mode. Availible modes :
     *     -> "none" : no flow control
     *     -> "rts/cts" : use RTS/CTS handshaking
     *     -> "xon/xoff" : use XON/XOFF protocol
     * @return bool
     */
    function confFlowControl ($mode)
    {
        if ($this->_dState !== SERIAL_DEVICE_SET)
        {
            trigger_error("Unable to set flow control mode : the device is either not set or opened", E_USER_WARNING);
            return false;
        }

        $linuxModes = array(
            "none"     => "clocal -crtscts -ixon -ixoff",
            "rts/cts"  => "-clocal crtscts -ixon -ixoff",
            "xon/xoff" => "-clocal -crtscts ixon ixoff"
        );
        $windowsModes = array(
            "none"     => "xon=off octs=off rts=on",
            "rts/cts"  => "xon=off octs=on rts=hs",
            "xon/xoff" => "xon=on octs=off rts=on",
        );

        if ($mode !== "none" and $mode !== "rts/cts" and $mode !== "xon/xoff") {
            trigger_error("Invalid flow control mode specified", E_USER_ERROR);
            return false;
        }

        if ($this->_os === "linux")
            $ret = $this->_exec("stty -F " . $this->_device . " " . $linuxModes[$mode], $out);
        elseif ($this->_os === "osx")
            $ret = $this->_exec("stty -f " . $this->_device . " " . $linuxModes[$mode], $out);
        else
            $ret = $this->_exec("mode " . $this->_windevice . " " . $windowsModes[$mode], $out);

        if ($ret === 0) return true;
        else {
            trigger_error("Unable to set flow control : " . $out[1], E_USER_ERROR);
            return false;
        }
    }

    /**
     * Sets a setserial parameter (cf man setserial)
     * NO MORE USEFUL !
     *     -> No longer supported
     *     -> Only use it if you need it
     *
     * @param string $param parameter name
     * @param string $arg parameter value
     * @return bool
     */
    function setSetserialFlag ($param, $arg = "")
    {
        if (!$this->_ckOpened()) return false;

        $return = exec ("setserial " . $this->_device . " " . $param . " " . $arg . " 2>&1");

        if ($return{0} === "I")
        {
            trigger_error("setserial: Invalid flag", E_USER_WARNING);
            return false;
        }
        elseif ($return{0} === "/")
        {
            trigger_error("setserial: Error with device file", E_USER_WARNING);
            return false;
        }
        else
        {
            return true;
        }
    }

    //
    // CONFIGURE SECTION -- {STOP}
    //

    //
    // I/O SECTION -- {START}
    //

    /**
     * Sends a string to the device
     *
     * @param string $str string to be sent to the device
     * @param float $waitForReply time to wait for the reply (in seconds)
     */
    function sendMessage ($str, $waitForReply = 0.1)
    {
        $this->_buffer .= $str;

        if ($this->autoflush === true) $this->serialflush();

        usleep((int) ($waitForReply * 1000000));
    }

    /**
     * Reads the port until no new datas are availible, then return the content.
     *
     * @pararm int $count number of characters to be read (will stop before
     *     if less characters are in the buffer)
     * @return string
     */
    function readPort ($count = 0)
    {
        if ($this->_dState !== SERIAL_DEVICE_OPENED)
        {
            trigger_error("Device must be opened to read it", E_USER_WARNING);
            return false;
        }

        if ($this->_os === "linux" || $this->_os === "osx")
            {
            // Behavior in OSX isn't to wait for new data to recover, but just grabs what's there!
            // Doesn't always work perfectly for me in OSX
            $content = ""; $i = 0;

            if ($count !== 0)
            {
                do {
                    if ($i > $count) $content .= fread($this->_dHandle, ($count - $i));
                    else $content .= fread($this->_dHandle, 128);
                } while (($i += 128) === strlen($content));
            }
            else
            {
                do {
                    $content .= fread($this->_dHandle, 128);
                } while (($i += 128) === strlen($content));
            }

            return $content;
        }
        elseif ($this->_os === "windows")
        {
            /* Do nothing : not implented yet */
        }

        trigger_error("Reading serial port is not implemented for Windows", E_USER_WARNING);
        return false;
    }

    /**
     * Flushes the output buffer
     * Renamed from flush for osx compat. issues
     *
     * @return bool
     */
    function serialflush ()
    {
        if (!$this->_ckOpened()) return false;

        if (fwrite($this->_dHandle, $this->_buffer) !== false)
        {
            $this->_buffer = "";
            return true;
        }
        else
        {
            $this->_buffer = "";
            trigger_error("Error while sending message", E_USER_WARNING);
            return false;
        }
    }

    //
    // I/O SECTION -- {STOP}
    //

    //
    // INTERNAL TOOLKIT -- {START}
    //

    function _ckOpened()
    {
        if ($this->_dState !== SERIAL_DEVICE_OPENED)
        {
            trigger_error("Device must be opened", E_USER_WARNING);
            return false;
        }

        return true;
    }

    function _ckClosed()
    {
        if ($this->_dState !== SERIAL_DEVICE_CLOSED)
        {
            trigger_error("Device must be closed", E_USER_WARNING);
            return false;
        }

        return true;
    }

    function _exec($cmd, &$out = null)
    {
        $desc = array(
            1 => array("pipe", "w"),
            2 => array("pipe", "w")
        );

        $proc = proc_open($cmd, $desc, $pipes);

        $ret = stream_get_contents($pipes[1]);
        $err = stream_get_contents($pipes[2]);

        fclose($pipes[1]);
        fclose($pipes[2]);

        $retVal = proc_close($proc);

        if (func_num_args() == 2) $out = array($ret, $err);
        return $retVal;
    }

    //
    // INTERNAL TOOLKIT -- {STOP}
    //
}
?>

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

252

253

254

255

256

257

258

259

260

261

262

263

264

265

266

267

268

269

270

271

272

273

274

275

276

277

278

279

280

281

282

283

284

285

286

287

288

289

290

291

292

293

294

295

296

297

298

299

300

301

302

303

304

305

306

307

308

309

310

311

312

313

314

315

316

317

318

319

320

321

322

323

324

325

326

327

328

329

330

331

332

333

334

335

336

337

338

339

340

341

342

343

344

345

346

347

348

349

350

351

352

353

354

355

356

357

358

359

360

361

362

363

364

365

366

367

368

369

370

371

372

373

374

375

376

377

378

379

380

381

382

383

384

385

386

387

388

389

390

391

392

393

394

395

396

397

398

399

400

401

402

403

404

405

406

407

408

409

410

411

412

413

414

415

416

417

418

419

420

421

422

423

424

425

426

427

428

429

430

431

432

433

434

435

436

437

438

439

440

441

442

443

444

445

446

447

448

449

450

451

452

453

454

455

456

457

458

459

460

461

462

463

464

465

466

467

468

469

470

471

472

473

474

475

476

477

478

479

480

481

482

483

484

485

486

487

488

489

490

491

492

493

494

495

496

497

498

499

500

501

502

503

504

505

506

507

508

509

510

511

512

513

514

515

516

517

518

519

520

521

522

523

524

525

526

527

528

529

530

531

532

533

534

535

536

537

538

539

540

541

542

543

544

545

546

547

548

549

550

551

552

553

554

555

556

557

558

559

560

561

562

563

564

565

566

567

568

569

570

571

572

573

574

575

576

577

578

579

580

581

582

583

584

585

586

587

588

589

590

591

592

593

594

595

596

597

598

599

600

601

602

603

604

605

606

607

608

609

610

611

612

613

614

615

616

617

618

619

620

621

622

623

624

625

626

627

628

629

630

631

632

633

634

635

636

637

638

639

<?php

define ("SERIAL_DEVICE_NOTSET", 0);

define ("SERIAL_DEVICE_SET", 1);

define ("SERIAL_DEVICE_OPENED", 2);

/**

* Serial port control class

* THIS PROGRAM COMES WITH ABSOLUTELY NO WARANTIES !

* USE IT AT YOUR OWN RISKS !

* Changes added by Rizwan Kassim <rizwank@uwink.com> for OSX functionality

* Further changes for OSX functionality added by Andrew Hutchings <andrew.hutchings@gmail.com>

* default serial device for osx devices is /dev/tty.serial for machines with a built in serial device

* @author Rémy Sanchez <thenux@gmail.com>

* @thanks Aurélien Derouineau for finding how to open serial ports with windows

* @thanks Alec Avedisyan for help and testing with reading

* @copyright under GPL 2 licence

class phpSerial

{

var $_device = null;

var $_windevice = null;

var $_dHandle = null;

var $_dState = SERIAL_DEVICE_NOTSET;

var $_buffer = "";

var $_os = "";

/**

* This var says if buffer should be flushed by sendMessage (true) or manualy (false)

* @var bool

var $autoflush = true;

/**

* Constructor. Perform some checks about the OS and setserial

* @return phpSerial

function phpSerial ()

{

setlocale(LC_ALL, "en_US");

$sysname = php_uname();

if (substr($sysname, 0, 5) === "Linux")

{

$this->_os = "linux";

if($this->_exec("stty --version") === 0)

{

register_shutdown_function(array($this, "deviceClose"));

}

else

{

trigger_error("No stty availible, unable to run.", E_USER_ERROR);

}

elseif (substr($sysname, 0, 6) === "Darwin")

{

$this->_os = "osx";

if($this->_exec("stty") === 0)

{

register_shutdown_function(array($this, "deviceClose"));

}

else

{

trigger_error("No stty availible, unable to run.", E_USER_ERROR);

}

elseif(substr($sysname, 0, 7) === "Windows")

{

$this->_os = "windows";

register_shutdown_function(array($this, "deviceClose"));

}

else

{

trigger_error("Host OS is neither osx, linux nor windows, unable to run.", E_USER_ERROR);

exit();

}

// OPEN/CLOSE DEVICE SECTION -- {START}

/**

* Device set function : used to set the device name/address.

* -> linux : use the device address, like /dev/ttyS0

* -> osx : use the device address, like /dev/tty.serial

* -> windows : use the COMxx device name, like COM1 (can also be used

* with linux)

* @param string $device the name of the device to be used

* @return bool

function deviceSet ($device)

{

if ($this->_dState !== SERIAL_DEVICE_OPENED)

{

if ($this->_os === "linux")

{

if (preg_match("@^COM(\d+):?$@i", $device, $matches))

{

$device = "/dev/ttyS" . ($matches[1] - 1);

}

if ($this->_exec("stty -F " . $device) === 0)

{

$this->_device = $device;

$this->_dState = SERIAL_DEVICE_SET;

return true;

}

elseif ($this->_os === "osx")

{

if (preg_match("@^COM(\d+):?$@i", $device, $matches))

{

$device = "/dev/ttyS" . ($matches[1] - 1);

}

if ($this->_exec("stty -f " . $device) === 0)

{

$this->_device = $device;

$this->_dState = SERIAL_DEVICE_SET;

return true;

}

elseif ($this->_os === "windows")

{

if (preg_match("@^COM(\d+):?$@i", $device, $matches) and $this->_exec(exec("mode " . $device)) === 0)

{

$this->_windevice = "COM" . $matches[1];

$this->_device = "\\.\com" . $matches[1];

$this->_dState = SERIAL_DEVICE_SET;

return true;

}

trigger_error("Specified serial port is not valid", E_USER_WARNING);

return false;

}

else

{

trigger_error("You must close your device before to set an other one", E_USER_WARNING);

return false;

}

/**

* Opens the device for reading and/or writing.

* @param string $mode Opening mode : same parameter as fopen()

* @return bool

function deviceOpen ($mode = "r+b")

{

if ($this->_dState === SERIAL_DEVICE_OPENED)

{

trigger_error("The device is already opened", E_USER_NOTICE);

return true;

}

if ($this->_dState === SERIAL_DEVICE_NOTSET)

{

trigger_error("The device must be set before to be open", E_USER_WARNING);

return false;

}

if (!preg_match("@^[raw]\+?b?$@", $mode))

{

trigger_error("Invalid opening mode : ".$mode.". Use fopen() modes.", E_USER_WARNING);

return false;

}

$this->_dHandle = @fopen($this->_device, $mode);

if ($this->_dHandle !== false)

{

stream_set_blocking($this->_dHandle, 0);

$this->_dState = SERIAL_DEVICE_OPENED;

return true;

}

$this->_dHandle = null;

trigger_error("Unable to open the device", E_USER_WARNING);

return false;

}

/**

* Closes the device

* @return bool

function deviceClose ()

{

if ($this->_dState !== SERIAL_DEVICE_OPENED)

{

return true;

}

if (fclose($this->_dHandle))

{

$this->_dHandle = null;

$this->_dState = SERIAL_DEVICE_SET;

return true;

}

trigger_error("Unable to close the device", E_USER_ERROR);

return false;

}

// OPEN/CLOSE DEVICE SECTION -- {STOP}

// CONFIGURE SECTION -- {START}

/**

* Configure the Baud Rate

* Possible rates : 110, 150, 300, 600, 1200, 2400, 4800, 9600, 38400,

* 57600 and 115200.

* @param int $rate the rate to set the port in

* @return bool

function confBaudRate ($rate)

{

if ($this->_dState !== SERIAL_DEVICE_SET)

{

trigger_error("Unable to set the baud rate : the device is either not set or opened", E_USER_WARNING);

return false;

}

$validBauds = array (

110 => 11,

150 => 15,

300 => 30,

600 => 60,

1200 => 12,

2400 => 24,

4800 => 48,

9600 => 96,

19200 => 19,

38400 => 38400,

57600 => 57600,

115200 => 115200

);

if (isset($validBauds[$rate]))

{

if ($this->_os === "linux")

{

$ret = $this->_exec("stty -F " . $this->_device . " " . (int) $rate, $out);

}

if ($this->_os === "osx")

{

$ret = $this->_exec("stty -f " . $this->_device . " " . (int) $rate, $out);

}

elseif ($this->_os === "windows")

{

$ret = $this->_exec("mode " . $this->_windevice . " BAUD=" . $validBauds[$rate], $out);

}

else return false;

if ($ret !== 0)

{

trigger_error ("Unable to set baud rate: " . $out[1], E_USER_WARNING);

return false;

}

/**

* Configure parity.

* Modes : odd, even, none

* @param string $parity one of the modes

* @return bool

function confParity ($parity)

{

if ($this->_dState !== SERIAL_DEVICE_SET)

{

trigger_error("Unable to set parity : the device is either not set or opened", E_USER_WARNING);

return false;

}

$args = array(

"none" => "-parenb",

"odd" => "parenb parodd",

"even" => "parenb -parodd",

);

if (!isset($args[$parity]))

{

trigger_error("Parity mode not supported", E_USER_WARNING);

return false;

}

if ($this->_os === "linux")

{

$ret = $this->_exec("stty -F " . $this->_device . " " . $args[$parity], $out);

}

elseif ($this->_os === "osx")

{

$ret = $this->_exec("stty -f " . $this->_device . " " . $args[$parity], $out);

}

else

{

$ret = $this->_exec("mode " . $this->_windevice . " PARITY=" . $parity{0}, $out);

}

if ($ret === 0)

{

return true;

}

trigger_error("Unable to set parity : " . $out[1], E_USER_WARNING);

return false;

}

/**

* Sets the length of a character.

* @param int $int length of a character (5 <= length <= 8)

* @return bool

function confCharacterLength ($int)

{

if ($this->_dState !== SERIAL_DEVICE_SET)

{

trigger_error("Unable to set length of a character : the device is either not set or opened", E_USER_WARNING);

return false;

}

$int = (int) $int;

if ($int < 5) $int = 5;

elseif ($int > 8) $int = 8;

if ($this->_os === "linux")

{

$ret = $this->_exec("stty -F " . $this->_device . " cs" . $int, $out);

}

elseif ($this->_os === "osx")

{

$ret = $this->_exec("stty -f " . $this->_device . " cs" . $int, $out);

}

else

{

$ret = $this->_exec("mode " . $this->_windevice . " DATA=" . $int, $out);

}

if ($ret === 0)

{

return true;

}

trigger_error("Unable to set character length : " .$out[1], E_USER_WARNING);

return false;

}

/**

* Sets the length of stop bits.

* @param float $length the length of a stop bit. It must be either 1,

* 1.5 or 2. 1.5 is not supported under linux and on some computers.

* @return bool

function confStopBits ($length)

{

if ($this->_dState !== SERIAL_DEVICE_SET)

{

trigger_error("Unable to set the length of a stop bit : the device is either not set or opened", E_USER_WARNING);

return false;

}

if ($length != 1 and $length != 2 and $length != 1.5 and !($length == 1.5 and $this->_os === "linux"))

{

trigger_error("Specified stop bit length is invalid", E_USER_WARNING);

return false;

}

if ($this->_os === "linux")

{

$ret = $this->_exec("stty -F " . $this->_device . " " . (($length == 1) ? "-" : "") . "cstopb", $out);

}

if ($this->_os === "osx")

{

$ret = $this->_exec("stty -f " . $this->_device . " " . (($length == 1) ? "-" : "") . "cstopb", $out);

}

else

{

$ret = $this->_exec("mode " . $this->_windevice . " STOP=" . $length, $out);

}

if ($ret === 0)

{

return true;

}

trigger_error("Unable to set stop bit length : " . $out[1], E_USER_WARNING);

return false;

}

/**

* Configures the flow control

* @param string $mode Set the flow control mode. Availible modes :

* -> "none" : no flow control

* -> "rts/cts" : use RTS/CTS handshaking

* -> "xon/xoff" : use XON/XOFF protocol

* @return bool

function confFlowControl ($mode)

{

if ($this->_dState !== SERIAL_DEVICE_SET)

{

trigger_error("Unable to set flow control mode : the device is either not set or opened", E_USER_WARNING);

return false;

}

$linuxModes = array(

"none" => "clocal -crtscts -ixon -ixoff",

"rts/cts" => "-clocal crtscts -ixon -ixoff",

"xon/xoff" => "-clocal -crtscts ixon ixoff"

);

$windowsModes = array(

"none" => "xon=off octs=off rts=on",

"rts/cts" => "xon=off octs=on rts=hs",

"xon/xoff" => "xon=on octs=off rts=on",

);

if ($mode !== "none" and $mode !== "rts/cts" and $mode !== "xon/xoff") {

trigger_error("Invalid flow control mode specified", E_USER_ERROR);

return false;

}

if ($this->_os === "linux")

$ret = $this->_exec("stty -F " . $this->_device . " " . $linuxModes[$mode], $out);

elseif ($this->_os === "osx")

$ret = $this->_exec("stty -f " . $this->_device . " " . $linuxModes[$mode], $out);

else

$ret = $this->_exec("mode " . $this->_windevice . " " . $windowsModes[$mode], $out);

if ($ret === 0) return true;

else {

trigger_error("Unable to set flow control : " . $out[1], E_USER_ERROR);

return false;

}

/**

* Sets a setserial parameter (cf man setserial)

* NO MORE USEFUL !

* -> No longer supported

* -> Only use it if you need it

* @param string $param parameter name

* @param string $arg parameter value

* @return bool

function setSetserialFlag ($param, $arg = "")

{

if (!$this->_ckOpened()) return false;

$return = exec ("setserial " . $this->_device . " " . $param . " " . $arg . " 2>&1");

if ($return{0} === "I")

{

trigger_error("setserial: Invalid flag", E_USER_WARNING);

return false;

}

elseif ($return{0} === "/")

{

trigger_error("setserial: Error with device file", E_USER_WARNING);

return false;

}

else

{

return true;

}

// CONFIGURE SECTION -- {STOP}

// I/O SECTION -- {START}

/**

* Sends a string to the device

* @param string $str string to be sent to the device

* @param float $waitForReply time to wait for the reply (in seconds)

function sendMessage ($str, $waitForReply = 0.1)

{

$this->_buffer .= $str;

if ($this->autoflush === true) $this->serialflush();

usleep((int) ($waitForReply * 1000000));

}

/**

* Reads the port until no new datas are availible, then return the content.

* @pararm int $count number of characters to be read (will stop before

* if less characters are in the buffer)

* @return string

function readPort ($count = 0)

{

if ($this->_dState !== SERIAL_DEVICE_OPENED)

{

trigger_error("Device must be opened to read it", E_USER_WARNING);

return false;

}

if ($this->_os === "linux" || $this->_os === "osx")

{

// Behavior in OSX isn't to wait for new data to recover, but just grabs what's there!

// Doesn't always work perfectly for me in OSX

$content = ""; $i = 0;

if ($count !== 0)

{

do {

if ($i > $count) $content .= fread($this->_dHandle, ($count - $i));

else $content .= fread($this->_dHandle, 128);

} while (($i += 128) === strlen($content));

}

else

{

do {

$content .= fread($this->_dHandle, 128);

} while (($i += 128) === strlen($content));

}

return $content;

}

elseif ($this->_os === "windows")

{

/* Do nothing : not implented yet */

}

trigger_error("Reading serial port is not implemented for Windows", E_USER_WARNING);

return false;

}

/**

* Flushes the output buffer

* Renamed from flush for osx compat. issues

* @return bool

function serialflush ()

{

if (!$this->_ckOpened()) return false;

if (fwrite($this->_dHandle, $this->_buffer) !== false)

{

$this->_buffer = "";

return true;

}

else

{

$this->_buffer = "";

trigger_error("Error while sending message", E_USER_WARNING);

return false;

}

// I/O SECTION -- {STOP}

// INTERNAL TOOLKIT -- {START}

function _ckOpened()

{

if ($this->_dState !== SERIAL_DEVICE_OPENED)

{

trigger_error("Device must be opened", E_USER_WARNING);

return false;

}

return true;

}

function _ckClosed()

{

if ($this->_dState !== SERIAL_DEVICE_CLOSED)

{

trigger_error("Device must be closed", E_USER_WARNING);

return false;

}

return true;

}

function _exec($cmd, &$out = null)

{

$desc = array(

1 => array("pipe", "w"),

2 => array("pipe", "w")

);

$proc = proc_open($cmd, $desc, $pipes);

$ret = stream_get_contents($pipes[1]);

$err = stream_get_contents($pipes[2]);

fclose($pipes[1]);

fclose($pipes[2]);

$retVal = proc_close($proc);

if (func_num_args() == 2) $out = array($ret, $err);

return $retVal;

}

// INTERNAL TOOLKIT -- {STOP}

}

Zoeken

PHP – COM poort communicatie

Simpel

Met een CLASS script