Arduino Shield - Relais shield

Hardware

Dit shield bevat 4 relais en is eenvoudig te bedienen doormiddel van een digitale uitgang op de arduino (4,5,6,7) hoog te maken.

Informatie (ENG):

Compatible with Arduino UNO, Makerduino UNO and other boards with the similar structure and function.
Standardized shape design.
5VDC control voltage.
4 high quality mechanical relays.
High quality screw terminal.
Provides NO/NC interfaces.

Script

Onderstaand script laat elk relais 1 voor 1 opkomen en tegelijk afvallen.

const byte Relay1 = 7;
const byte Relay2 = 6;
const byte Relay3 = 5;
const byte Relay4 = 4;

void setup () {
  pinMode(Relay1, OUTPUT);
  pinMode(Relay2, OUTPUT);
  pinMode(Relay3, OUTPUT);
  pinMode(Relay4, OUTPUT);
}

void loop () {
  digitalWrite(Relay1, HIGH);
  delay(500);   
  digitalWrite(Relay2, HIGH);
  delay(500);  
  digitalWrite(Relay3, HIGH);
  delay(500);  
  digitalWrite(Relay4, HIGH);
  delay(500);  
  digitalWrite(Relay1, LOW);
  digitalWrite(Relay2, LOW);
  digitalWrite(Relay3, LOW);
  digitalWrite(Relay4, LOW);
  delay(1000);
}

const byte Relay1 = 7;

const byte Relay2 = 6;

const byte Relay3 = 5;

const byte Relay4 = 4;

void setup () {

pinMode(Relay1, OUTPUT);

pinMode(Relay2, OUTPUT);

pinMode(Relay3, OUTPUT);

pinMode(Relay4, OUTPUT);

}

void loop () {

digitalWrite(Relay1, HIGH);

delay(500);

digitalWrite(Relay2, HIGH);

delay(500);

digitalWrite(Relay3, HIGH);

delay(500);

digitalWrite(Relay4, HIGH);

delay(500);

digitalWrite(Relay1, LOW);

digitalWrite(Relay2, LOW);

digitalWrite(Relay3, LOW);

digitalWrite(Relay4, LOW);

delay(1000);

}

Zoeken

Arduino Shield – Relais shield

Hardware

Script