Linksys WAG354G v1/v2 (ADSL router)
Bootlog via UART
Dit is de OEM bootlog bij het opstarten via de UART seriele verbinding op de printplaat.
|
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 |
free space start: 0xb0020000 free space end: 0xb0400000 Minimal POST completed... Success. Last reset cause: Software reset (memory controller also reset) PSPBoot1.2 rev: 0.22.17 (c) Copyright 2002-2004 Texas Instruments, Inc. All Rights Reserved. FlashType: No mac find, use default mac mac_value: 00:16:B6:01:B9:D8 Press ESC for monitor... 521 (psbl) boot order: f boot file: mtd1 Booting... Launching kernel decompressor. Starting LZMA Uncompression Algorithm. Copyright (C) 2003 Texas Instruments Incorporated; Copyright (C) 1999-2003 Igor Pavlov. Compressed file is LZMA format. Kernel decompressor was successful ... launching kernel. LIN X tarted..ConfThiCPU revision is: 00018448 Primary instruction cache 16kb, linesize 16 bytes (4 ways) Primary data cache 16kb, linesize 16 bytes (4 ways) Number of TLB entries 16. Linux version 2.4.17_mvl21-malta-mips_fp_le (root@59-120-187-167.hinet-ip.hinet.net) (gcc version 2.95.3 20010315 (release/MontaVista)) #31 €» 10€ë 28 00:23:15 CST 2006 Determined physical RAM map: memory: 14000000 @ 00000000 (reserved) memory: 00020000 @ 14000000 (ROM data) memory: 00fe0000 @ 14020000 (usable) On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. .........boot_code Pspboot........... ..54....49....45....4e....56....30....2e....38....00....ff.. base address: b0010000 env size: 65536 ptr: b0010000 Kernel command line: calculating r4koff... 000b71b0(750000) CPU frequency 150.00 MHz Calibrating delay loop... 149.91 BogoMIPS Freeing Adam2 reserved memory [0x14001000,0x0001f000] Memory: 13876k/16384k available (1888k kernel code, 2508k reserved, 139k data, 64k init) Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes) Inode-cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 TI Optimizations: Allocating TI-Cached Memory Pool. Warning: Number of buffers is not configured.Setting default to 512 Using 512 Buffers for TI-Cached Memory Pool. DEBUG: Using Hybrid Mode. NSP Optimizations: Succesfully allocated TI-Cached Memory Pool. Initializing RT netlink socket Starting kswapd Disabling the Out Of Memory Killer devfs: v1.7 (20011216) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 pty: 32 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with no serial options enabled ttyS00 at 0xa8610e00 (irq = 15) is a 16550A ttyS01 at 0xa8610f00 (irq = 16) is a 16550A Vlynq CONFIG_MIPS_AVALANCHE_VLYNQ_PORTS=2 Vlynq Device vlynq0 registered with minor no 63 as misc device. Result=0 Vlynq instance:0 Link UP Vlynq Device vlynq1 registered with minor no 62 as misc device. Result=0 VLYNQ 1 : init failed block: 64 slots per queue, batch=16 Using the MAC with external PHY Cpmac driver is allocating buffer memory at init time. Using the MAC with external PHY Cpmac driver Disable TX complete interrupt setting threshold to 20. Default Asymmetric MTU for eth0 1500 PPP generic driver version 2.4.1 avalanche flash device: 0x400000 at 0x10000000. Amd/Fujitsu Extended Query Table v1.1 at 0x0040 Physically mapped flash: Swapping erase regions for broken CFI table. number of CFI chips: 1 Looking for mtd device :mtd0: Found a mtd0 image (0xe0000), with size (0x2f0000). Looking for mtd device :mtd1: Found a mtd1 image (0x20000), with size (0x3b0000). Looking for mtd device :mtd2: Found a mtd2 image (0x0), with size (0x20000). Looking for mtd device :mtd3: Found a mtd3 image (0x3f0000), with size (0x10000). Looking for mtd device :mtd4: Found a mtd4 image (0x3d0000), with size (0x20000). Creating 5 MTD partitions on "Physically mapped flash": 0x000e0000-0x003d0000 : "mtd0" 0x00020000-0x003d0000 : "mtd1" 0x00000000-0x00020000 : "mtd2" 0x003f0000-0x00400000 : "mtd3" 0x003d0000-0x003f0000 : "mtd4" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 1024) IPv4 over IPv4 tunneling driver Default Asymmetric MTU for tunl0 1480 GRE over IPv4 tunneling driver Default Asymmetric MTU for gre0 1476 Linux IP multicast router 0.06 plus PIM-SM klips_info:ipsec_init: KLIPS startup, FreeS/WAN IPSec version: super-freeswan-1.99.8 Default Asymmetric MTU for ipsec0 0 Default Asymmetric MTU for ipsec1 0 Default Asymmetric MTU for ipsec2 0 Default Asymmetric MTU for ipsec3 0 Default Asymmetric MTU for ipsec4 0 klips_info:ipsec_alg_init: KLIPS alg v=0.8.1-0 (EALG_MAX=255, AALG_MAX=15) klips_info:ipsec_alg_init: calling ipsec_alg_static_init() ipsec_1des_init(alg_type=15 alg_id=2 name=1des): ret=0 You should NOT load 1DES support except for testing purposes ! ipsec_null_init(alg_type=15 alg_id=11 name=null): ret=0 ip_conntrack version 2.0 (128 buckets, 1024 max) - 392 bytes per conntrack ip_tables: (c)2000 Netfilter core team netfilter PSD loaded - (c) astaro AG NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 Initializing the WAN Bridge. Please set the MAC Address for the WAN Bridge. Set the Environment variable 'wan_br_mac'. MAC Address should be in the following format: xx.xx.xx.xx.xx.xx 802.1Q VLAN Support v1.6 Ben Greear <greearb@candelatech.com> vlan Initialization complete. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 64k freed Firmware Version: 1.01.11 SQUASHFS error: Can't find a SQUASHFS superblock on mtdblock(31,4) ret = -1 www -> /www mount: Invalid argument Hit enter to continue...killall: httpd: no process killed Configured 19 states now insmod tiatm Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drivers/atm/tiatm.o name=[eth0] lan_ifname=[br0] =====> set br0 hwaddr to eth0 wlconf: No such file or directory Lan Ipaddr: 255.255.255.0 Netmask: 255.255.255.0................ 255.255.255.0 255.255.255.0 mixed mode insmod ap driver Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drivers/net/tiap.o ret = 0 .............list .............. antsel.c: External Antenna [HTTPD Starting on /www] The boot is UNKNOWN tftp server started tftpd: standalone socket HTTPD start, port 80 dhcpd:auto_search_ip=0,firstsetlanip=1 .............list .............. info, udhcp server (v0.9.8) started QE: No such file or directory log_ipaddr=255 killall: leijun--upnpd-igd ver 0.83 2004-0329: no process killed Now Start syslog.........................!!zebra disabled killall: adslpolling: no process killed IDLE Hit enter to continue...wan def hwaddr 00:16:B6:01:B9:D9 polling now ....... upnpd-igd:current select wan connection:0 upnp_content_num_0 = 14 killall: begin_now: no process killed Hit enter to continue...Hit enter to continue... |
Bij het indrukken van de miniswitch (voor interne/externe antenne), worden deze berichten getoond:
|
1 2 |
antsel.c: Internal Antenna antsel.c: External Antenna |
UART serial LOG bij firmware update via de WEBINTERFACE:
|
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 |
type upgrade **** str = WAG354G-EU-AnnexA-ETSI-1.01.11-code.bin url_upgrade = 0 Hit enter to continue... killall: zebra: no process killed killall: ripd: no process killed killall: snmpd: no process killed upnpd-igd over now Hit enter to continue... killall: wanledctrl: no process killed killall: checkadsl: no process killed killall: cped: no process killed killall: redial: no process killed killall: pluto: no process killed Hit enter to continue...Hit enter to continue...Hit enter to continue...Hit enter to continue...Upgrading ........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................header:WA31PBOT total len = 3436544 erase_info.length:10000 copy file end! copy_firmware_image:successful done Ready to restart! Restarting system. |
