3D Printer – Extruder – Compact Bowden Extruder, direct drive 1.75mm (MK7)
Gaat veelal samen met X carriage mount E3D v6 bowden extruder
Thingiverse commentaar:
This Bowden extruder kit is simple and effective. Flawless usage so far. Many thanks to schlotzz for his elegant design.
Printed ABS at 0.2mm with 30% infill.
Edited the openscad file dimensions for the larger MK7 drive gear.
Required parts:
2 x M3 x 25mm screws with washers and nuts
2 x M3 x 10mm screws with washers and nuts
2 x M3 x 15mm screws with nuts
1 x M5 x 10mm screw
1 x 608 bearing
1 x MK7 drive gear
1 x PTFE push fit connector
Approx 500-700mm of PTFE / Teflon tube
Optional:
Small spring for adjustable tension on idler.
[#/3dprinter/onderdelen/compact_bowden_extruder_direct_drive_1.75mm_mk7″ ]