Builder 3D software - Windows driver

Om de Builder 3D printer aan de computer te kunnen koppelen vraagt Windows om een driver.

Handleiding

Installeren Win n printer driver

Ga naar “Configuratiescherm” en vervolgens naar “Apparatenbeheer”
Klik deze aan.
Sluit de printer op de usb poort aan en schakel deze in.
Wacht totdat de lijst in “Apparatenbeheer” vernieuwd is.
Bij “Overige apparaten” hangt nu “USB Serial “met een uitroepteken.
Dubbelklik nu op het icoon “USB Serial”
Een venster wordt nu geopend met “Eigenschappen van USB Serial”
Klik nu op de knop “Stuurprogramma bijwerken”
Een venster met de tekst “Stuurprogramma bijwerken-USB Serial” verschijnt nu.
Selecteer de keuze : “Op mijn computer naar stuurprogramma’s zoeken”
Een nieuw venter wordt nu geopend: “Naar stuurprogramma’s op uw computer zoeken”
Kies de locatie waar zich het bestand “Builder CDC.inf” bevind middels de knop “Bladeren”
Een venster wordt geopend met de tekst “Windows-beveiliging”
Kies de keuze: “Dit stuurprogramma toch installeren”

In de “Apparatenbeheer” lijst verschijnt nu onder “Poorten (COM&LPT) “ de tekst “Builder 3D-printer Serial (Com x) waarbij x het com(poort) nummer is die in Repetier-Host geselecteerd moet worden.

;************************************************************
; Windows USB CDC ACM Setup File
; Copyright (c) 2000 Microsoft Corporation
;************************************************************

[DefaultInstall]
CopyINF=Builder_CDC.inf

[Version]
Signature="$Windows NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%MFGNAME%
DriverPackageDisplayName=%DriverPackageDisplayName%
DriverVer=7/1/2012,10.0.0.0

[Manufacturer]
%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64

[SourceDisksNames]

[SourceDisksFiles]

[DestinationDirs]
FakeModemCopyFileSection=12
DefaultDestDir=12

[DriverInstall]
Include=mdmcpq.inf,usb.inf
CopyFiles=FakeModemCopyFileSection
AddReg=DriverAddReg

[DriverAddReg]
HKR,,DevLoader,,*ntkern 
HKR,,NTMPDriver,,usbser.sys 
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"

[DriverInstall.Services]
Include=mdmcpq.inf
AddService=usbser, 0x00000002, DriverService

[DriverService]
DisplayName=%ServiceName%
ServiceType=1
StartType=3
ErrorControl=1
ServiceBinary=%12%\usbser.sys
LoadOrderGroup=Base


;------------------------------------------------------------------------------
;  Vendor and Product ID Definitions
;------------------------------------------------------------------------------
; When developing your USB device, the VID and PID used in the PC side
; application program and the firmware on the microcontroller must match.
; Modify the below line to use your VID and PID.  Use the format as shown below.
; Note: One INF file can be used for multiple devices with different VID and PIDs.
; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
;------------------------------------------------------------------------------
[DeviceList]
%DESCRIPTION.CDC%=DriverInstall, USB\VID_16C0&PID_0483&REV_0100
%DESCRIPTION.CDC.HID%=DriverInstall, USB\VID_16D0&PID_0483

[DeviceList.NTx86]
%DESCRIPTION.CDC%=DriverInstall, USB\VID_16C0&PID_0483&REV_0100
%DESCRIPTION.CDC.HID%=DriverInstall, USB\VID_16C0&PID_0483

[DeviceList.NTamd64]
%DESCRIPTION.CDC%=DriverInstall, USB\VID_16C0&PID_0483&REV_0100
%DESCRIPTION.CDC.HID%=DriverInstall, USB\VID_16C0&PID_0483

[DeviceList.NTia64]
%DESCRIPTION.CDC%=DriverInstall, USB\VID_16C0&PID_0483&REV0100
%DESCRIPTION.CDC.HID%=DriverInstall, USB\VID_16C0&PID_0483

;------------------------------------------------------------------------------
;  String Definitions
;------------------------------------------------------------------------------
;Modify these strings to customize your device
;------------------------------------------------------------------------------
[Strings]
DriverPackageDisplayName="Builder 3D-printer"
ServiceName="USB RS-232 Emulation Driver"
MFGNAME="Code-P West bv"
DESCRIPTION.CDC="Builder 3D-printer Serial"
DESCRIPTION.CDC.HID="Builder CDC Serial & HID Keyboard/Mouse"

;************************************************************

; Windows USB CDC ACM Setup File

;************************************************************

[DefaultInstall]

CopyINF=Builder_CDC.inf

[Version]

Signature="$Windows NT$"

Class=Ports

ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}

Provider=%MFGNAME%

DriverPackageDisplayName=%DriverPackageDisplayName%

DriverVer=7/1/2012,10.0.0.0

[Manufacturer]

%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64

[SourceDisksNames]

[SourceDisksFiles]

[DestinationDirs]

FakeModemCopyFileSection=12

DefaultDestDir=12

[DriverInstall]

Include=mdmcpq.inf,usb.inf

CopyFiles=FakeModemCopyFileSection

AddReg=DriverAddReg

[DriverAddReg]

HKR,,DevLoader,,*ntkern

HKR,,NTMPDriver,,usbser.sys

HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"

[DriverInstall.Services]

Include=mdmcpq.inf

AddService=usbser, 0x00000002, DriverService

[DriverService]

DisplayName=%ServiceName%

ServiceType=1

StartType=3

ErrorControl=1

ServiceBinary=%12%\usbser.sys

LoadOrderGroup=Base

;------------------------------------------------------------------------------

; Vendor and Product ID Definitions

;------------------------------------------------------------------------------

; When developing your USB device, the VID and PID used in the PC side

; application program and the firmware on the microcontroller must match.

; Modify the below line to use your VID and PID. Use the format as shown below.

; Note: One INF file can be used for multiple devices with different VID and PIDs.

; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.

;------------------------------------------------------------------------------

[DeviceList]

%DESCRIPTION.CDC%=DriverInstall, USB\VID_16C0&PID_0483&REV_0100

%DESCRIPTION.CDC.HID%=DriverInstall, USB\VID_16D0&PID_0483

[DeviceList.NTx86]

%DESCRIPTION.CDC%=DriverInstall, USB\VID_16C0&PID_0483&REV_0100

%DESCRIPTION.CDC.HID%=DriverInstall, USB\VID_16C0&PID_0483

[DeviceList.NTamd64]

%DESCRIPTION.CDC%=DriverInstall, USB\VID_16C0&PID_0483&REV_0100

%DESCRIPTION.CDC.HID%=DriverInstall, USB\VID_16C0&PID_0483

[DeviceList.NTia64]

%DESCRIPTION.CDC%=DriverInstall, USB\VID_16C0&PID_0483&REV0100

%DESCRIPTION.CDC.HID%=DriverInstall, USB\VID_16C0&PID_0483

;------------------------------------------------------------------------------

; String Definitions

;------------------------------------------------------------------------------

;Modify these strings to customize your device

;------------------------------------------------------------------------------

[Strings]

DriverPackageDisplayName="Builder 3D-printer"

ServiceName="USB RS-232 Emulation Driver"

MFGNAME="Code-P West bv"

DESCRIPTION.CDC="Builder 3D-printer Serial"

DESCRIPTION.CDC.HID="Builder CDC Serial & HID Keyboard/Mouse"

[#/3dprinter/builder3dmono/software_driver” ]

Zoeken

Builder 3D software – Windows driver

Handleiding