USB Stick – WiFi MEDION XG-701A (MD40900) / Netgear WG111
USB Stick – MEDION XG-701A (MD40900) / Netgear WG111 op Linux
|
1 |
Bus 001 Device 004: ID 0cde:0006 Z-Com XG-300 802.11b Adapter |
Wat heb je nodig?
1) Prism54 firmware voor MEDION XG-701A / Netgear WG111
Ik heb deze stick nog liggen en uitgeprobeerd op de Raspberry Pi, ik kreeg deze foutmelding:
|
1 2 3 4 5 6 7 8 9 |
[253767.283346] usb 1-1.4: new high-speed USB device number 5 using dwc_otg [253767.383696] usb 1-1.4: New USB device found, idVendor=0cde, idProduct=0006 [253767.383720] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [253767.429853] cfg80211: Calling CRDA to update world regulatory domain [253767.461054] usb 1-1.4: Loading firmware file isl3886usb [253767.461204] usb 1-1.4: Direct firmware load for isl3886usb failed with error -2 [253767.461227] usb 1-1.4: Firmware not found. [253767.461244] usb 1-1.4: failed to initialize device (-2) [253767.462554] usbcore: registered new interface driver p54usb |
Er wordt geprobeerd “isl3886usb” firmware te laden welke niet standaard aanwezig is in een linux distributie.
Installeer de firmware voor de Prism54 “p54usb” driver, haal de stick eruit en stop deze er weer in, nu word de firmware geladen en is hij klaar voor gebruik:
|
1 2 3 4 5 6 7 8 9 10 11 12 13 |
[253852.033814] usb 1-1.4: new high-speed USB device number 6 using dwc_otg [253852.134183] usb 1-1.4: New USB device found, idVendor=0cde, idProduct=0006 [253852.134205] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [253852.180010] cfg80211: Calling CRDA to update world regulatory domain [253852.209963] usb 1-1.4: Loading firmware file isl3886usb [253852.210448] ieee80211 phy0: p54 detected a LM86 firmware [253852.210473] p54: rx_mtu reduced from 3240 to 2392 [253852.210492] ieee80211 phy0: FW rev 2.13.1.0 - Softmac protocol 5.5 [253852.210513] ieee80211 phy0: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES [253852.213817] usbcore: registered new interface driver p54usb [253854.052535] ieee80211 phy0: hwaddr 00:60:b3:b3:50:9e, MAC:isl3880 RF:Frisbee [253854.069030] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [253854.070481] usb 1-1.4: is registered as 'phy0' |
|
1 2 3 4 5 6 |
wlan0 Link encap:Ethernet HWaddr 00:60:b3:b3:50:9e UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) |
