MendelMax instellingen – Slic3r
MendelMax 1 / 1.5
Slic3r configuratie
|
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 |
# generated by Slic3r 0.9.0 on Sun Sep 9 11:01:56 2012 acceleration = 0 bed_size = 220,280 bed_temperature = 0 bridge_fan_speed = 100 bridge_flow_ratio = 1 bridge_speed = 70 brim_width = 0 complete_objects = 0 cooling = 1 disable_fan_first_layers = 1 duplicate = 1 duplicate_distance = 6 duplicate_grid = 1,1 end_gcode = G1 X0 Y0\nM104 S0 ; turn off temperature\nM140 S0; turn off heated bed\nM84; disable motors external_perimeter_speed = 100% extra_perimeters = 1 extruder_clearance_height = 20 extruder_clearance_radius = 20 extruder_offset = 0x0 extrusion_axis = E extrusion_multiplier = 1.01 extrusion_width = 0 fan_always_on = fan_below_layer_time = 60 filament_diameter = 2.87 fill_angle = 35 fill_density = 0.33 fill_pattern = rectilinear first_layer_bed_temperature = 0 first_layer_extrusion_width = 200% first_layer_height = 110% first_layer_speed = 30% first_layer_temperature = 0 g0 = 0 gcode_arcs = 0 gcode_comments = 0 gcode_flavor = reprap infill_acceleration = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0 infill_speed = 100 layer_gcode = layer_height = 0.3 max_fan_speed = 100 min_fan_speed = 35 min_print_speed = 40 notes = nozzle_diameter = 0.4 output_filename_format = [input_filename_base].gcode perimeter_acceleration = 25 perimeter_extruder = 1 perimeter_extrusion_width = 0 perimeter_speed = 65 perimeters = 2 post_process = print_center = 110,100 randomize_start = 1 retract_before_travel = 3 retract_length = 0.7 retract_lift = 0.35 retract_restart_extra = 0 retract_speed = 15 rotate = 0 scale = 1 skirt_distance = 6 skirt_height = 1 skirts = 1 slowdown_below_layer_time = 30 small_perimeter_speed = 55 solid_fill_pattern = rectilinear solid_infill_speed = 80 solid_layers = 2 start_gcode = support_material = 0 support_material_angle = 0 support_material_extruder = 1 support_material_extrusion_width = 0 support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_threshold = 45 temperature = 0 threads = 4 top_solid_infill_speed = 65 travel_speed = 150 use_relative_e_distances = 0 z_offset = 0 |