software Archieven - Pagina 8 van 13 - DomoticX Knowledge Center

Met deze tool kan je bestanden (images) naar het flash geheugen kopiëren van een ESP8266 WiFi module, het is mogelijk om diverse bestanden kopiëren naar een bepaald adres in de chip. Screen:

FLASH_DOWNLOAD_TOOLS_v2.4_150924

1.fix the bug that tool does not show the MAC correctly for 48bit version of EFUSE.
2.update MAC reading functions

Note: 
Default MAC addresses our latest chips begins with "5CCF7F",
Please do not hard-code it with "18FE34" in your code.
AP : 5E-CF-7F-xx-xx-xx
STA: 5C-CF-7F-xx-xx-xx


FLASH_DOWNLOAD_TOOLS_v2.3_150916

add efuse check function.
add an option that tool just download the original binaries without changing anything.
add RFInit mode option:(byte[114] of init_data.bin)
0: RF init no RF CAL, using all RF CAL data in flash, it takes about 2ms for RF init 
1: RF init only do TX power control CAL, others using RF CAL data in flash , it takes about 20ms for RF init 
3: RF init do all RF CAL, it takes about 200ms for RF init """) 

#==============================================================
UPDATE: SOURCE CODE of flash_download_tool 
Functionally same as FLASH_DOWNLOAD_TOOLS_v1.2_150512.

To make it runnable, you need these python modules:
1. python2.6 /python 2.7
2. wxpython3.0 or above
3. pyserial
4. xlrd

For linux, you need to replace "COM1" with "/dev/ttyS0".


FLASH_DOWNLOAD_TOOLS_v1.2_150512

Fix some hints&tips


FLASH_DOWNLOAD_TOOLS_v1.1_150511

Support new flash size.
DO NOT SUPPORT : 7:4MB-C2(2048KB+2048KB)


FLASH_DOWNLOAD_TOOLS_v1.0_150508

Pay attention to the tips and hints in this tool.

NOTE:(IMPORTANT!)
The spi settings in the flash download tool will overwrite the setting during the compile procedure(at first serveral bytes from 0x0).
Make sure the settings are accord with the compile procedure.
The original binary will not be changed.
You can find the configured binaries in FLASH_DOWNLOAD_TOOLS/bin_tmp after the download is finished.
Especially for bootvxx.bin, it will not change and keep default settings for spi mode.
Also , you can press "CombineBin" button to get a combined binary which is already set to the mode you choose.

The flash mode are defined in the 2nd and 3rd( count from 0) byte at flash address 0x0.
Bootloader will read this bytes out and changed spi mode and size mode immediately. So this is very important for your production.
Definition: 

# write flash bin header
#============================
# SPI FLASH PARAMS
#-------------------
#flash_mode=
# 0: QIO
# 1: QOUT
# 2: DIO
# 3: DOUT
#-------------------
#flash_clk_div=
# 0 : 80m / 2
# 1 : 80m / 3
# 2 : 80m / 4
# 0xf: 80m / 1
#-------------------
#flash_size=
# 0 : 512 KB (256 KB + 256 KB)
# 1 : 256 KB
# 2 : 1024 KB (512 KB + 512 KB)
# 3 : 2048 KB (512 KB + 512 KB)
# 4 : 4096 KB (512 KB + 512 KB)
# 5：2048 KB (1024 KB + 1024 KB)#support in sdk 1.0.2
# 6：4096 KB (1024 KB + 1024 KB)#support in sdk 1.0.2
# 7：4096 KB (2048 KB + 2048 KB)#support in sdk 1.0.2
#-------------------
# END OF SPI FLASH PARAMS
#============================
byte2=int(flash_mode)&0xff
byte3=(((int(flash_size)<<4)| int(flash_clk_div))&0xff)

FLASH_DOWNLOAD_TOOLS_v0.9.6_150419

fix bug: Some types of flash require longer erase time, cause a erase time out in this tool.


FLASH_DOWNLOAD_TOOLS_v0.9.5_150414

1.fix error when downloading a binary that is not aligned.
2.fix error when loading default settings


NOTE:(IMPORTANT!)
The spi settings in the flash download tool will overwrite the setting during the compile procedure(at first serveral bytes from 0x0).
Make sure the settings are accord with the compile procedure.
The original binary will not be changed.
You can find the configured binaries in FLASH_DOWNLOAD_TOOLS/bin_tmp after the download is finished.
Especially for bootvxx.bin, it will not change and keep default settings for spi mode.
Also , you can press "CombineBin" button to get a combined binary which is already set to the mode you choose.

The flash mode are defined in the 2nd and 3rd( count from 0) byte at flash address 0x0.
Bootloader will read this bytes out and changed spi mode and size mode immediately. So this is very important for your production.
Definition: 

# write flash bin header
#============================
# SPI FLASH PARAMS
#-------------------
#flash_mode=
# 0: QIO
# 1: QOUT
# 2: DIO
# 3: DOUT
#-------------------
#flash_clk_div=
# 0 : 80m / 2
# 1 : 80m / 3
# 2 : 80m / 4
# 0xf: 80m / 1
#-------------------
#flash_size=
# 0 : 512 KB
# 1 : 256 KB
# 2 : 1024 KB
# 3 : 2048 KB
# 4 : 4096 KB
#-------------------
# END OF SPI FLASH PARAMS
#============================
byte2=int(flash_mode)&0xff
byte3=(((int(flash_size)<<4)| int(flash_clk_div))&0xff)


FLASH_DOWNLOAD_TOOLS_v0.9.3.1_141118

release note:
1.fix the flash erase bug
2.fix the exception for w25x series flash,when using boot loader.
3.change the the download order, from low addr offset to high.

settings :
1.crystal: support 3 freq. 26m 40m 24m,choose the one you use.
2.spi speed:
spi flash read/write clk frequency.
3.spi mode :
1)QIO ,for flash that support quad r/w operation(e.g. W25Q)
2)QOUT,for flash that support quad read operation(e.g. W25Q)
3)DIO,for flash that support dual r/w operation(e.g. W25Q &W25X)
4)DOUT, for flash that support dual read operation(e.g. W25Q &W25X)
4.Flash size: effect the flash operation APIs and bootloader address.
5.combine bine button: generate the bin file of the whole size.
6.ID BIND:just provide a way that write chip id in the flash addr.Need at least 2 sector(2*4096Bytes)

==============================================================

esp_init_data_default.bin-->0x7c000
blank.bin ==> 0x7e000
devkey --> 0x3e000
eagle.app.v6.irom0text.bin-->0x40000
eagle.app.v6.flash.bin --> 0x0

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

FLASH_DOWNLOAD_TOOLS_v2.4_150924

1.fix the bug that tool does not show the MAC correctly for 48bit version of EFUSE.

2.update MAC reading functions

Note:

Default MAC addresses our latest chips begins with "5CCF7F",

Please do not hard-code it with "18FE34" in your code.

AP : 5E-CF-7F-xx-xx-xx

STA: 5C-CF-7F-xx-xx-xx

FLASH_DOWNLOAD_TOOLS_v2.3_150916

add efuse check function.

add an option that tool just download the original binaries without changing anything.

add RFInit mode option:(byte[114] of init_data.bin)

0: RF init no RF CAL, using all RF CAL data in flash, it takes about 2ms for RF init

1: RF init only do TX power control CAL, others using RF CAL data in flash , it takes about 20ms for RF init

3: RF init do all RF CAL, it takes about 200ms for RF init """)

#==============================================================

UPDATE: SOURCE CODE of flash_download_tool

Functionally same as FLASH_DOWNLOAD_TOOLS_v1.2_150512.

To make it runnable, you need these python modules:

1. python2.6 /python 2.7

2. wxpython3.0 or above

3. pyserial

4. xlrd

For linux, you need to replace "COM1" with "/dev/ttyS0".

FLASH_DOWNLOAD_TOOLS_v1.2_150512

Fix some hints&tips

FLASH_DOWNLOAD_TOOLS_v1.1_150511

Support new flash size.

DO NOT SUPPORT : 7:4MB-C2(2048KB+2048KB)

FLASH_DOWNLOAD_TOOLS_v1.0_150508

Pay attention to the tips and hints in this tool.

NOTE:(IMPORTANT!)

The spi settings in the flash download tool will overwrite the setting during the compile procedure(at first serveral bytes from 0x0).

Make sure the settings are accord with the compile procedure.

The original binary will not be changed.

You can find the configured binaries in FLASH_DOWNLOAD_TOOLS/bin_tmp after the download is finished.

Especially for bootvxx.bin, it will not change and keep default settings for spi mode.

Also , you can press "CombineBin" button to get a combined binary which is already set to the mode you choose.

The flash mode are defined in the 2nd and 3rd( count from 0) byte at flash address 0x0.

Bootloader will read this bytes out and changed spi mode and size mode immediately. So this is very important for your production.

Definition:

# write flash bin header

#============================

# SPI FLASH PARAMS

#-------------------

#flash_mode=

# 0: QIO

# 1: QOUT

# 2: DIO

# 3: DOUT

#-------------------

#flash_clk_div=

# 0 : 80m / 2

# 1 : 80m / 3

# 2 : 80m / 4

# 0xf: 80m / 1

#-------------------

#flash_size=

# 0 : 512 KB (256 KB + 256 KB)

# 1 : 256 KB

# 2 : 1024 KB (512 KB + 512 KB)

# 3 : 2048 KB (512 KB + 512 KB)

# 4 : 4096 KB (512 KB + 512 KB)

# 5：2048 KB (1024 KB + 1024 KB)#support in sdk 1.0.2

# 6：4096 KB (1024 KB + 1024 KB)#support in sdk 1.0.2

# 7：4096 KB (2048 KB + 2048 KB)#support in sdk 1.0.2

#-------------------

# END OF SPI FLASH PARAMS

#============================

byte2=int(flash_mode)&0xff

byte3=(((int(flash_size)<<4)| int(flash_clk_div))&0xff)

FLASH_DOWNLOAD_TOOLS_v0.9.6_150419

fix bug: Some types of flash require longer erase time, cause a erase time out in this tool.

FLASH_DOWNLOAD_TOOLS_v0.9.5_150414

1.fix error when downloading a binary that is not aligned.

2.fix error when loading default settings

NOTE:(IMPORTANT!)

The spi settings in the flash download tool will overwrite the setting during the compile procedure(at first serveral bytes from 0x0).

Make sure the settings are accord with the compile procedure.

The original binary will not be changed.

You can find the configured binaries in FLASH_DOWNLOAD_TOOLS/bin_tmp after the download is finished.

Especially for bootvxx.bin, it will not change and keep default settings for spi mode.

Also , you can press "CombineBin" button to get a combined binary which is already set to the mode you choose.

The flash mode are defined in the 2nd and 3rd( count from 0) byte at flash address 0x0.

Bootloader will read this bytes out and changed spi mode and size mode immediately. So this is very important for your production.

Definition:

# write flash bin header

#============================

# SPI FLASH PARAMS

#-------------------

#flash_mode=

# 0: QIO

# 1: QOUT

# 2: DIO

# 3: DOUT

#-------------------

#flash_clk_div=

# 0 : 80m / 2

# 1 : 80m / 3

# 2 : 80m / 4

# 0xf: 80m / 1

#-------------------

#flash_size=

# 0 : 512 KB

# 1 : 256 KB

# 2 : 1024 KB

# 3 : 2048 KB

# 4 : 4096 KB

#-------------------

# END OF SPI FLASH PARAMS

#============================

byte2=int(flash_mode)&0xff

byte3=(((int(flash_size)<<4)| int(flash_clk_div))&0xff)

FLASH_DOWNLOAD_TOOLS_v0.9.3.1_141118

release note:

1.fix the flash erase bug

2.fix the exception for w25x series flash,when using boot loader.

3.change the the download order, from low addr offset to high.

settings :

1.crystal: support 3 freq. 26m 40m 24m,choose the one you use.

2.spi speed:

spi flash read/write clk frequency.

3.spi mode :

1)QIO ,for flash that support quad r/w operation(e.g. W25Q)

2)QOUT,for flash that support quad read operation(e.g. W25Q)

3)DIO,for flash that support dual r/w operation(e.g. W25Q &W25X)

4)DOUT, for flash that support dual read operation(e.g. W25Q &W25X)

4.Flash size: effect the flash operation APIs and bootloader address.

5.combine bine button: generate the bin file of the whole size.

6.ID BIND:just provide a way that write chip id in the flash addr.Need at least 2 sector(2*4096Bytes)

==============================================================

esp_init_data_default.bin-->0x7c000

blank.bin ==> 0x7e000

devkey --> 0x3e000

eagle.app.v6.irom0text.bin-->0x40000

eagle.app.v6.flash.bin --> 0x0

Download SP Flash Download Tool @ bbs.espressif.com [#/esp/software/flash_download_tool” ]

Website mkspiffs – Een tool om SPIFFS (SPI Flash File System) bestanden te bouwen of uit te pakken.

   mkspiffs  {-c <pack_dir>|-u <dest_dir>|-l|-i} [-d <0-5>] [-b <number>]
             [-p <number>] [-s <number>] [--] [--version] [-h]
             <image_file>


Where: 

   -c <pack_dir>,  --create <pack_dir>
     (OR required)  create spiffs image from a directory
         -- OR --
   -u <dest_dir>,  --unpack <dest_dir>
     (OR required)  unpack spiffs image to a directory
         -- OR --
   -l,  --list
     (OR required)  list files in spiffs image
         -- OR --
   -i,  --visualize
     (OR required)  visualize spiffs image


   -d <0-5>,  --debug <0-5>
     Debug level. 0 means no debug output.

   -b <number>,  --block <number>
     fs block size, in bytes

   -p <number>,  --page <number>
     fs page size, in bytes

   -s <number>,  --size <number>
     fs image size, in bytes

   --,  --ignore_rest
     Ignores the rest of the labeled arguments following this flag.

   --version
     Displays version information and exits.

   -h,  --help
     Displays usage information and exits.

   <image_file>
     (required)  spiffs image file

mkspiffs {-c <pack_dir>|-u <dest_dir>|-l|-i} [-d <0-5>] [-b <number>]

[-p <number>] [-s <number>] [--] [--version] [-h]

<image_file>

Where:

-c <pack_dir>, --create <pack_dir>

(OR required) create spiffs image from a directory

-- OR --

-u <dest_dir>, --unpack <dest_dir>

(OR required) unpack spiffs image to a directory

-- OR --

-l, --list

(OR required) list files in spiffs image

-- OR --

-i, --visualize

(OR required) visualize spiffs image

-d <0-5>, --debug <0-5>

Debug level. 0 means no debug output.

-b <number>, --block <number>

fs block size, in bytes

-p <number>, --page <number>

fs page size, in bytes

-s <number>, --size <number>

fs image size, in bytes

--, --ignore_rest

Ignores the rest of the labeled arguments following this flag.

--version

Displays version information and exits.

-h, --help

Displays usage information and exits.

<image_file>

(required) spiffs image file

Informatie (ENG): Build: You need gcc (≥4.8) or clang(≥600.0.57), and make. On Windows, use MinGW. Run: $ make dist Download mkspiffs @ github.com [#/software/mkspiffs” ]

Zoeken

Tag: software

Webserver software – Apache 2.2.x – 02 configuratie

Webserver software – Apache 2.2.x – 01 installatie

Webserver software – Apache HTTP server

ESP8266 WiFi software – NodeMCU flasher

ESP8266 WiFi software – ESP Flash Download Tool (flasher)

Compressie – SPIFFS images (software)

3D Ontwerp Library – BOLTS (software)

CD/DVD/BluRay Branden – CDBurnerXP (software)

Software

Qemu – Raspbian emuleren