Arduino libraries Archieven - DomoticX Knowledge Center

Arduino Library – QR-code

Door Sebastiaan Geplaatst op 2019-11-23 Geplaatst in Arduino libraries Getagd met Arduino, Biblitheek, Controller, Library, Nunchuk, Wii

Installatie van Arduino IDE libraries: Arduino info Een QR-code is een bepaald type tweedimensionale streepjescode die in 1994 is ontwikkeld door Denso Wave, een dochteronderneming van het Japanse bedrijf Denso. De letters QR zijn een afkorting van Quick Response (“snel antwoord”). …

Arduino Library – QR-code Lees meer »

Arduino Library – UIPEthernet

Door Sebastiaan Geplaatst op 2018-03-04 Geplaatst in Arduino libraries Getagd met Arduino, Biblitheek, Library, RTU, TCP/IP, UIPEthernet

UIPEthernet Driver voor ENC28J60 Installatie van Arduino IDE libraries: Arduino info Informatie (ENG): UIPEthernet library for Arduinos (Atmel AVR-s,Atmel SAM3X8E ARM Cortex-M3,STM32F series,ESP8266,Intel ARC32(Genuino101),Nordic nRF51(RFduino),Teensy boards,Realtek Ameba(RTL8195A,RTL8710)), ENC28j60 network chip compatible with Wiznet W5100 API Original UIPEthernet writed by Norbert Truchsess. You …

Arduino Library – UIPEthernet Lees meer »

Arduino Library – Ethercard

Door Sebastiaan Geplaatst op 2018-03-04 Geplaatst in Arduino libraries Getagd met Arduino, Biblitheek, Ethercard, Library, RTU, TCP/IP

ETHERCARD Driver voor ENC28J60 Installatie van Arduino IDE libraries: Arduino info Informatie (ENG): EtherCard is a driver for the ENC28J60 chip, compatible with Arduino IDE. Adapted and extended from code written by Guido Socher and Pascal Stang. License: GPL2 Requirements Hardware: This library only supports …

Arduino Library – Ethercard Lees meer »

Arduino Library – Modbus

Door Sebastiaan Geplaatst op 2018-01-21 Geplaatst in Arduino libraries Getagd met Arduino, Biblitheek, Library, Modbus, RS485, RTU, TCP/IP

Modbus bibliotheken Installatie van Arduino IDE libraries: Arduino info Modbus RTU (smarmengol) libmodbus is a library that provides a Serial Modbus implementation for Arduino. A primary goal was to enable industrial communication for the Arduino in order to link it to …

Arduino Library – Modbus Lees meer »

Arduino Library – NTPClient

Door Sebastiaan Geplaatst op 2018-01-17 Geplaatst in Arduino libraries Getagd met Arduino, Biblitheek, date, Library, NTPClient, time

Installatie van Arduino IDE libraries: Arduino info Met deze bibliotheek kan je de tijd (en datum) ophalen van een NTP server. Voorbeeld:

#include <NTPClient.h>
// change next line to use with another board/shield
#include <ESP8266WiFi.h>
//#include <WiFi.h> // for WiFi shield
//#include <WiFi101.h> // for WiFi 101 shield or MKR1000
#include <WiFiUdp.h>

const char *ssid     = "<SSID>";
const char *password = "<PASSWORD>";

WiFiUDP ntpUDP;

// By default 'time.nist.gov' is used with 60 seconds update interval and
// no offset
NTPClient timeClient(ntpUDP);

// You can specify the time server pool and the offset, (in seconds)
// additionaly you can specify the update interval (in milliseconds).
// NTPClient timeClient(ntpUDP, "europe.pool.ntp.org", 3600, 60000);

void setup(){
  Serial.begin(115200);
  WiFi.begin(ssid, password);

  while ( WiFi.status() != WL_CONNECTED ) {
    delay ( 500 );
    Serial.print ( "." );
  }

  timeClient.begin();
}

void loop() {
  timeClient.update();

  Serial.println(timeClient.getFormattedTime());

  delay(1000);
}

#include <NTPClient.h>

// change next line to use with another board/shield

#include <ESP8266WiFi.h>

//#include <WiFi.h> // for WiFi shield

//#include <WiFi101.h> // for WiFi 101 shield or MKR1000

#include <WiFiUdp.h>

const char *ssid = "<SSID>";

const char *password = "<PASSWORD>";

WiFiUDP ntpUDP;

// By default 'time.nist.gov' is used with 60 seconds update interval and

// no offset

NTPClient timeClient(ntpUDP);

// You can specify the time server pool and the offset, (in seconds)

// additionaly you can specify the update interval (in milliseconds).

// NTPClient timeClient(ntpUDP, "europe.pool.ntp.org", 3600, 60000);

void setup(){

Serial.begin(115200);

WiFi.begin(ssid, password);

while ( WiFi.status() != WL_CONNECTED ) {

delay ( 500 );

Serial.print ( "." );

}

timeClient.begin();

}

void loop() {

timeClient.update();

Serial.println(timeClient.getFormattedTime());

delay(1000);

}

Changelog:

3.1.0 patched
- Added feature for date

3.1.0
- Added functions for changing the timeOffset and updateInterval later. Thanks @SirUli

3.0.0
- Constructors now require UDP instance argument, to add support for non-ESP8266 boards
- Added optional begin API to override default local port
- Added end API to close UDP socket
- Changed return type of update and forceUpdate APIs to bool, and return success or failure
- Change return type of getDay, getHours, getMinutes, and getSeconds to int

2.0.0
- Add missing empty constructor for the Basic example
- Remove the need for calling begin() and make sure to always try to force update if there was no update yet.

1.0.0
-Initial Release

Changelog:

3.1.0 patched

- Added feature for date

3.1.0

- Added functions for changing the timeOffset and updateInterval later. Thanks @SirUli

3.0.0

- Constructors now require UDP instance argument, to add support for non-ESP8266 boards

- Added optional begin API to override default local port

- Added end API to close UDP socket

- Changed return type of update and forceUpdate APIs to bool, and return success or failure

- Change return type of getDay, getHours, getMinutes, and getSeconds to int

2.0.0

- Add missing empty constructor for the Basic example

- Remove the need for calling begin() and make sure to always try to force update if there was no update yet.

1.0.0

-Initial Release

Download NTPClient library @ Github 3.1.0 patched information [#/arduino/libraries/ntpclient” ]

Arduino Library – Wii Nunchuk

Door Sebastiaan Geplaatst op 2017-09-09 Geplaatst in Arduino libraries Getagd met Arduino, Biblitheek, Controller, Library, Nunchuk, Wii

Installatie van Arduino IDE libraries: Arduino info Hardware: Informatie (ENG): Todbot bibliotheek Very simple adapter for hooking a Wii Nunchuck to your Arduino or other microcontroller. Example Arduino code is is in firmware/WiichuckDemo. The library functions are: – nunchuck_setpowerpins() — power up …

Arduino Library – Wii Nunchuk Lees meer »

Arduino Library – FastLED

Door Sebastiaan Geplaatst op 2017-07-09 Geplaatst in Arduino libraries Getagd met Arduino, Biblitheek, FastLED, Library, Serieel, Seriele verbinding

Installatie van Arduino IDE libraries: Arduino info Informatie (ENG): FastLED This is a library for easily & efficiently controlling a wide variety of LED chipsets, like the ones sold by adafruit (Neopixel, DotStar, LPD8806), Sparkfun (WS2801), and aliexpress. In addition to …

Arduino Library – FastLED Lees meer »

Arduino Library – LiquidTWI2

Door Sebastiaan Geplaatst op 2017-06-18 Geplaatst in Arduino libraries Getagd met Arduino, bibliotheek, I2C, Library, LiquidTWI2

Installatie van Arduino IDE libraries: Arduino info A lean, high speed I2C LCD Library for Arduino, which supports MCP23008 (Adafruit LCD Backpack) and MCP23017 (Adafruit RGB LCD Shield)A lean, high speed I2C LCD Library for Arduino, which supports MCP23008 (Adafruit LCD …

Arduino Library – LiquidTWI2 Lees meer »

Arduino Library – DHT sensors (ESP8266)

Door Sebastiaan Geplaatst op 2017-05-20 Geplaatst in Arduino libraries Getagd met Arduino, Biblitheek, DHT, ESP, ESP8266, Library, Sensor, sensoren

Installatie van Arduino IDE libraries: Arduino info Dit is een DHT11/22 bibliotheek voor de ESP te gebruiken met ArduinoIDE, de DHT sensoren hebben een zeer nauwkeurige timing, daarvoor is deze bibliotheek speciaal gemaakt voor de ESP platform. Informatie (ENG) Interrupt driven …

Arduino Library – DHT sensors (ESP8266) Lees meer »

Arduino Library – AccelStepper

Door Sebastiaan Geplaatst op 2017-05-12 Geplaatst in Arduino libraries Getagd met Accelstepper, Arduino, Biblitheek, Library

Installatie van Arduino IDE libraries: Arduino info Informatie (ENG): This is the Arduino AccelStepper library. It provides an object-oriented interface for 2, 3 or 4 pin stepper motors and motor drivers. The standard Arduino IDE includes the Stepper library for stepper …

Arduino Library – AccelStepper Lees meer »

Zoeken

Categorie: Arduino libraries