Samsung SMT-6010E – Firmware
Het firmware bestand “SMT-6010E_OpenSource.zip” voor deze decoder is te vinden op samsung.com.
Tag: SMT-6010E
Samsung SMT-6010E – Linux gegevens
Linux gegevens:
|
1 |
Linux version 2.2.20 (root@MF-DEV-SSBUILD01) (ecc version v6.0_6127) #1 Wed Dec 15 13:10:43 CET 2010 |
|
1 2 3 4 |
CPU : BSP 1.0 (0x20000) cpu MHz : 297.000 mem MHz : 118.800000 BogoMIPS : 296.55 |
|
1 2 3 4 |
02f8-02ff : serial(auto) 03f8-03ff : serial(auto) 1000-10ff : eth0 1120-1133 : usb-uhci |
|
1 2 3 4 5 6 7 8 9 10 |
total: used: free: shared: buffers: cached: Mem: 126877696 124436480 2441216 6324224 30425088 22233088 Swap: 0 0 0 MemTotal: 123904 kB MemFree: 2384 kB MemShared: 6176 kB Buffers: 29712 kB Cached: 21712 kB SwapTotal: 0 kB SwapFree: 0 kB |
|
1 2 3 4 |
major minor #blocks name 62 0 16544 fla 62 1 16531 fla1 |
|
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 |
IrDrv 29904 1 cs4341Control 23832 1 DmaBufferDrv 16944 1 DrcDrv 96936 1 AoutDrv 63844 1 ScrDrv 35992 1 mediaDev 691444 1 [IrDrv DrcDrv AoutDrv ScrDrv] streaming 126764 0 [DrcDrv AoutDrv mediaDev] dmaBuffers 17280 0 [DmaBufferDrv streaming] boardSupportDev 321484 1 [mediaDev] noncoregpDev 76704 0 [mediaDev boardSupportDev] PageClusterDrv 19048 1 EventDrv 15112 1 ProcessInfoDrv 13372 1 processInfo 5116 0 [IrDrv cs4341Control DmaBufferDrv DrcDrv AoutDrv ScrDrv streaming PageClusterDrv EventDrv ProcessInfoDrv] KernelEvents 4016 0 [DrcDrv streaming EventDrv processInfo] pageCluster 5032 0 [PageClusterDrv] cxa2161r 8232 1 saa7128 6632 1 8139too 58192 1 doc 708936 1 |
|
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 |
Character devices: 1 mem 2 pty 3 ttyp 4 ttyS 5 cua 10 misc 13 input 100 bootDriver 128 ptm 136 pts 180 usb 252 Cxa2161rScart 254 Saa7128color Block devices: 1 ramdisk 62 fl |
|
1 2 3 4 5 6 7 8 |
[root:/etc]# cat /etc/passwd root:$1$$ssYAig.f1ZwT0N5M3yCFR.:0:0:root:/:/bin/sh bin:x:1:1:bin:/bin: daemon:x:2:2:daemon:/sbin: nobody:x:99:99:Nobody:/: ftp:x:14:100:FTP User:/: eti::100:100:ETI User:/tmp:/bin/sh VSstblogin01:$1$$j2o6P3pu8c2A5dhDlm3QK/:0:0:Linux User,,,:/:/bin/sh |
|
1 2 3 4 5 6 7 |
root:$1$$OEJ8lYz3qOTTGcQaMyjQj.:0:0:root:/:/bin/sh bin:x:1:1:bin:/bin: daemon:x:2:2:daemon:/sbin: nobody:x:99:99:Nobody:/: ftp:x:14:100:FTP User:/: eti::100:100:ETI User:/tmp:/bin/sh G9v3p3jmanXS:$1$$HVO2F/9PcBplVntUhlRKt.:0:0:Linux User,,,:/bin/sh |
|
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 |
hub.c: USB new device connect on bus1/1, assigned device number 2 usb.c: USB new device connect, assigned device number 2 Manufacturer: USB Product: Flash Disk SerialNumber: AA04012707872 usb.c: USB device 2 (vend/prod 0x90c/0x1000) is not claimed by any active driver. Length = 18 DescriptorType = 01 USB version = 2.00 Vendor:Product = 090c:1000 MaxPacketSize0 = 64 NumConfigurations = 1 Device version = 30.00 Device Class:SubClass:Protocol = 00:00:00 Per-interface classes Configuration: bLength = 9 bDescriptorType = 02 wTotalLength = 0020 bNumInterfaces = 01 bConfigurationValue = 01 iConfiguration = 00 bmAttributes = 80 MaxPower = 100mA Interface: 0 Alternate Setting: 0 bLength = 9 bDescriptorType = 04 bInterfaceNumber = 00 bAlternateSetting = 00 bNumEndpoints = 02 bInterface Class:SubClass:Protocol = 08:06:50 iInterface = 00 Endpoint: bLength = 7 bDescriptorType = 05 bEndpointAddress = 81 (in) bmAttributes = 02 (Bulk) wMaxPacketSize = 0040 bInterval = ff Endpoint: bLength = 7 bDescriptorType = 05 bEndpointAddress = 02 (out) bmAttributes = 02 (Bulk) wMaxPacketSize = 0040 bInterval = ff |
Samsung SMT-6010E – Aansluiten via UART
De UART aansluiting is de connectie op J7:
|
1 2 3 4 |
+------+ TX | heat | RX | sink | GND +------+ VCC(3.3v) |
De UART Baudrate is 115200 Root inloggegevens zijn: username: root password: t1days UART met de foto van de print: Hoe ga je te werk? 1) Sluit eerst de UART stick aan …
Samsung SMT-6010E – Boot LOG (UART)
BOOT LOG (UART):
|
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 |
Success1 registering the Video DAC devices for board: 1300, daughter board: 0 Success2 registering the Video DAC devices for board: 1300, daughter board: 0 Success3 registering the Video DAC devices for board: 1300, daughter board: 0 [cyg_net_init] Init: mbinit(0x00000000) [cyg_net_init] Init: cyg_net_init_devs(0x00000000) Init device 'rltk8139_eth0' [cyg_net_init] Init: loopattach(0x00000000) [cyg_net_init] Init: ifinit(0x00000000) [cyg_net_init] Init: domaininit(0x00000000) [cyg_net_init] Init: cyg_net_add_domain(0x803afae0) New domain internet at 0x00000000 [cyg_net_init] Init: cyg_net_add_domain(0x803aea60) New domain route at 0x00000000 [cyg_net_init] Init: call_route_init(0x00000000) [cyg_net_init] Done ************************* * Bootrom Version * * V_STB_BT_01_02_050418 * ************************* pciVIAInit imageDisplay Display Refresh Video Output example. etiDefaultMemPool 0x87efc000 , start 0x80000000 size 0x8000000 hiMemGap 0x104000 xOffset 80 yOffset 48 dstBytesPerPixel 2 imageBmpWidth 640 CXA2161R status : d8 CXA2161R status : d8 Press <CANCEL> remote key to start net booting.... hmpv_read_fcnt start time in 23eab437 cycles Doc Booting.... flRegisterSAFTL: start flRegisterSAFTL: end Media Size = 32 Mbytes Note: Searching for the media header. As a result a few H/W protection error messages might be reported. ERROR in read_Seq: M512_checkAndFixAccessError:Protection error occurred. ERROR in read_Seq: M512_checkAndFixAccessError:Protection error occurred. ERROR in read_Seq: M512_checkAndFixAccessError:Protection error occurred. ERROR in read_Seq: M512_checkAndFixAccessError:Protection error occurred. Note: header was found - end of media header search. DALN: PC=0x8009938c, RP=0x800ff560, addr=0x80a19f39: 2 byte load r60 START WITH BANK0 imageversion : 0 START TIME : 26940493 bdkReadBlock has Completed Succefully CheckSignature returned 0, nds signature passed END TIME : b156d10e Read done in 8d7d1a30 cycles Start Booting.... address from [82217820] 00:0a:0 Class 0200: 10ec:8139 0:0x1000[256]I 1:0x10000000[256]M IRQ 9 00:0c:0 Class 0601: 1106:0686 00:0c:1 Class 0101: 1106:0571 4:0x1100[16]I 00:0c:2 Class 0c03: 1106:3038 4:0x1120[32]I IRQ 16 00:0c:4 Class 0000: 1106:3057 pciDolphinFixup: 10ec:8139 IRQ pin A-->B IRQ 10 pciDolphinFixup: 1106:3038 VIA device: IRQ 42 (i8259 IRQ 5) Linux version 2.2.20 (root@MF-DEV-SSBUILD01) (ecc version v6.0_6127) #1 Wed Dec 15 13:10:43 CET 2010 CPU frequency: 297 MHz Mem frequency: 118 MHz Calibrating delay loop... 296.55 BogoMIPS Memory: 96128k/130032k available (2736k kernel code, 1072k data, 400k reserved) Dentry hash table entries: 16384 (order 3, 128k) Buffer cache hash table entries: 524288 (order 7, 2048k) Page cache hash table entries: 8192 (order 1, 32k) POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 524288 bhash 65536) Serial driver version 4.27 with no serial options enabled ttyS00 at 0x03f8 (irq = 41) is a 16550A ttyS01 at 0x02f8 (irq = 40) is a 16550A pty: 256 Unix98 ptys configured RAM disk driver initialized: 16 RAM disks of 29696K size RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 29696 blocks [1 disk] into ram disk... done. usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb.c: registered new driver hid mice: PS/2 mouse device common for all mice usb-uhci.c: $Revision: 1.2 $ time 13:11:06 Dec 15 2010 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0x1120, IRQ 42 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 usb.c: USB new device connect, assigned device number 1 Product: USB UHCI Root Hub SerialNumber: 1120 hub.c: USB hub found hub.c: 2 ports detected VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 128k freed Using /lib/modules/2.2.20/block/doc.o fl: TrueFFS driver 621.41 flRegisterComponents: fFound:01 fl: 1 device(s) found fl: Registered module at major 62 Partition check: fla: fla1 fl: Device 0x0 size 0x1028000 sectors 0x8140 fl: partition 0x1 size 0x1024c00 fla: fla1 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended EXT2-fs error (device fl(62,1)): ext2_check_blocks_bitmap: Wrong free blocks count for group 0, stored = 2798, counted = 2800 EXT2-fs error (device fl(62,1)): ext2_check_blocks_bitmap: Wrong free blocks count in super block, stored = 10727, counted = 10729 EXT2-fs error (device fl(62,1)): ext2_check_inodes_bitmap: Wrong free inodes count in group 0, stored = 2039, counted = 2041 EXT2-fs error (device fl(62,1)): ext2_check_inodes_bitmap: Wrong free inodes count in super block, stored = 4111, counted = 4113 grep: /var/run/rc.pids: No such file or directory test: 0: unknown operand ifconfig: face: error fetching interface information: Device not found Using /lib/modules/2.2.20/8139too.o PCI: Increasing latency timer of device 00:50 to 64 eth0: 8139too Fast Ethernet driver 0.9.18-2.2 eth0: Samsung Electronics SMT-6000E, YSU v1.2 <sukun.yoon@samsung.com> eth0: RealTek RTL8139 Fast Ethernet board found at 0x1000, IRQ 10 eth0: Chip is 'RTL-8139C' - MAC address '00:00:f0:ef:7e:56'. ifconfig: face: error fetching interface information: Device not found 60: old priority 0, new priority 7 eth0: Setting half-duplex based on auto-negotiated partner ability 0000. Using /lib/modules/2.2.20/saa7128/saa7128.o Loading Saa7128 Color Bar Test Module Saa7128color: Device registered with Major Number = 0 Using /lib/modules/2.2.20/saa7128/cxa2161r.o ^ALoading Cxa2161r Scart Switch Test Module Cxa2161rScart: Device registered with Major Number = 0 connect: Network is unreachable cat: /proc/bus/usb/devices: No such file or directory rm: cannot remove `/wfs/run': No such file or directory Login: killall: Evo: no process killed ifconfig: face: error fetching interface information: Device not found Using /lib/modules/2.2.20/pageCluster.o Using /lib/modules/2.2.20/KernelEvents.o Using /lib/modules/2.2.20/processInfo.o Using /lib/modules/2.2.20/ProcessInfoDrv.o Using /lib/modules/2.2.20/EventDrv.o Using /lib/modules/2.2.20/PageClusterDrv.o ^[[5~Using /lib/modules/2.2.20/noncoregpDev.o Using /lib/modules/2.2.20/boardSupportDev.o Success1 registering the Video DAC devices for board: 1300, daughter board: 0 Success2 registering the Video DAC devices for board: 1300, daughter board: 0 Success3 registering the Video DAC devices for board: 1300, daughter board: 0 Using /lib/modules/2.2.20/dmaBuffers.o Using /lib/modules/2.2.20/streaming.o Using /lib/modules/2.2.20/mediaDev.o Jump starting VLX processor In 6.0 mode. Vlx processor started successfully (vlxStatus 0x2). Using /lib/modules/2.2.20/ScrDrv.o Using /lib/modules/2.2.20/AoutDrv.o Using /lib/modules/2.2.20/DrcDrv.o Using /lib/modules/2.2.20/DmaBufferDrv.o Using /lib/modules/2.2.20/cs4341/cs4341Control.o Using /lib/modules/2.2.20/IrDrv.o REAL POOL 0x2d00008 to 0x2d00008. Heap at 0x1075524 REAL MALLOC 0x2d00008 REAL POOL 0x2d00008 to 0x2d00028. Heap at 0x1075524 REAL MALLOC 0x2d00028 REAL POOL 0x2d00008 to 0x2d00038. Heap at 0x1075524 REAL MALLOC 0x2d00038 REAL FREE (nil) REAL POOL 0x2d00008 to 0x2d00130. Heap at 0x1075524 REAL MALLOC 0x2d00130 REAL POOL 0x2d00008 to 0x2aab0008. Heap at 0x1075524 REAL MALLOC 0x2aab0008 REAL POOL 0x2d00008 to 0x2aab0008. Heap at 0x1075524 REAL MALLOC 0x2d00960 Saa7128color : Device Open (254, 0) Saa7128color: Opened Value 0 Enter SamsungPlayer:0 TVmode select: 4:3 TV ^[[5~Login: IIS audclk = 1 audclk = 1 DrcDrv: Output -> PAL Interlaced 720 x 576 @ 25Hz Primary input: Enabled Secondary input: Enabled Graphics input: Enabled gfxFormat: 800 alphaStream: 0 WARNING: Unable to utilize DMA pool. Defaulted to alloc for 1658880 bytes. This is OK during Evo init. Cxa2161rScart : Device Open (252, 0) Cxa2161rScart: Opened Value 0 I2C_ADDR - DATA1, DATA2, DATA3, DATA4, DATA5, DATA6, DATA7 [90] 86 , 80, 00 , 33 , 00 , 0b , ef I2C_ADDR - DATA1, DATA2, DATA3, DATA4, DATA5, DATA6, DATA7 [90] 86 , 80, 00 , 33 , 00 , 0b , ef ZCS POD S/D FNC_VCR 7 - 6 - 5 - 4 - 3 - 2 - 1 - 0 CXA2161R STATUS: 1 - 1 - 1 - 1 - 1 - 0 - 0 - 0 |
Samsung SMT-6010E – Algemene informatie
Hardware specificaties CPU: 300 MHz DSP Memory: 128 MB SDRAM, 32MB DOC for OS Image, 2MB Flash for Boot loads RTOS: Linux Browser: Html 4.0, http 1.1, DHTML, Frame Support, JavaScript 1.3, SSL 3.0, CSS Level3, Open SSH, Cookie Decoding: …