Mechanica Hardware – ZUM Scan (Horus)

De ZUM Scan shield is de standaard “aanbevolen” aansturingsmodule voor de ciclop 3D scanner, De ZUM scan kan op een arduino geplaatst worden.

 

ZUM scan board

Firmware uploaden

Wat heb je nodig?
1) Horus firmware

Aan de slag
1) Pak de bestanden/folder uit in de arduino map.
2) Hernoem de map “horus-fw-0.2” naar “horus-fw
3) Dubbelklik op “horus-fw.ino” om de Arduino IDE te openen en het bestand te laden.
(gaat dit niet dan start Arduino IDE en laad het ino bestand handmatig in.)
4) Selecteer de juiste poort en board en klik op uploaden.
5) De Horus firmware is nu op de Arduino geinstalleerd!


Informatie (ENG):

ZUM SCAN is a power shield compatible with Arduino UNO board and derivatives such as ZUM BT-328. This shield is used to power control stepper motors (using A4988 drivers), laser modules and LDR sensors.

The design is based on the Arduino CNC Shield. Like ZUM BT-328, the ZUM SCAN board is published on GitHub, released under the Creative Commons Attribution Share-Alike license (CC-BY-SA).

Specifications

Name Description
Model bq ZUM SCAN
Dimensions 67 (L) x 54 (W) mm
Input voltage 8V – 16 V
Nominal voltage 12 V
Motor driver socket 2 units
Laser control transistor 4 units
Analogue sensor connector 2 units
Other features Power jack connector. Reset button. Fuse protection for stepper motors. Compatible with Arduino UNO*

Bill of materials

DesignatorDescriptionFootprintQuantityValue
C1, C2Capacitor ElectrolyticBody_8-Height_11.5-Space_3,5_Folded2100uF 50V
Fx, FyPTC Resettable FuseMF-Rxx_S1_12.02
J1, J31x6 pin Header 2.54mm1x6 Pin Header 2.5426
J2, J41x8 pin Header 2.54mm1x8 Pin Header 2.5428
J5, J9, LDR6 pin Dual Header 2.54mm2x3 Pin Header 2.5436
J6, J7, J10, J118 pin Socket Header 2.54mm1x8 Socket Header THT 2.54mm48
J8, J121x4 pin Header 2.54mm1x4 Pin Header 2.5424
JPM1, JPM2, JPM31x2 Jumper 2.54mm3Blue 1x2
LASER8 pin Dual Header 2.54mm2x4 Pin Header 2.5418
PWRDC Power JackJack 2.11
Q1, Q2, Q3, Q4Mosfet Channel N Enhancement ModeTO-92-3L4
R1, R2ResistorResistor_THT_6mm210k ±5% 250mW
RESETMicro miniature pushbutton surface SwitchSW_THT_6.0x6.0x5.01

Foto’s

ZUM scan aanzichten

ZUM scan PCB


Download ZUM scan @ Github

[#/mechanica/hardware/ZUM_Scan_(Horus)” ]