Gegevens Archieven - DomoticX Knowledge Center

Excel – Importeer data uit een CSV bestand (VB Script)

Door Sebastiaan Geplaatst op 2016-12-10 Geplaatst in Howto? (software) Getagd met CSV, Data, Excel, Gegevens, importeer, opstarten

Importeer data uit een CSV bestand bij opstarten Dit voorbeeld laat zien hoe je automatisch gegevens vanuit een CSV bestand importeert in een Excel werkblad bij het opstarten van het bestand. Allereerst zal je de “ontwikkelaars” opties aan moeten zetten …

Excel – Importeer data uit een CSV bestand (VB Script) Lees meer »

SIP Telefonie – Wachtwoord achterhalen van provider (telfort)

Door Sebastiaan Geplaatst op 2016-08-19 Geplaatst in Howto? (software) Getagd met experiabox, Gegevens, SIP, telfort, voip, Wireshark

Ik heb het zelf uitgeprobeerd en je kan inderdaad je wachtwoord achterhalen, ik heb screenshots en aanvullende data toegevoegd aan het oorspronkelijke artikel. Wat heb je nodig? 1) Experiabox (Telfort) 2) WireShark TCP capture Veel mensen op het forum van …

SIP Telefonie – Wachtwoord achterhalen van provider (telfort) Lees meer »

Arduino Shield – Ethernet W5100 – Data via webbrowser

Door Sebastiaan Geplaatst op 2015-10-04 Geplaatst in Randapparatuur op de Arduino (Shields) Getagd met Arduino, Data, Ethernet, Gegevens, Shield, W5100, Webserver

Dit voorbeeld laat zien hoe je gegevens (voorbeeld analoge pins) van de arduino kan tonen via een webbrowser, en zo de gegevens op afstand kan zien, het shield functioneert dan als een webserver. Hardware: Arduino + Ethernet shield (W5100) Wat …

Arduino Shield – Ethernet W5100 – Data via webbrowser Lees meer »

Fritz!Box Fon WLAN 7170 – Linux gegevens

Door Sebastiaan Geplaatst op 2015-04-15 Geplaatst in FRITZ!Box Getagd met 7170, Fon, Fritz!Box, Gegevens, Linux, Router, Wireless, WLAN

Fritz!Box Fon WLAN 7170 Router Linux informatie

Linux version 2.6.13.1-ohio (1699) (gcc-Version 3.4.6) #1 Thu Jun 25 13:14:17 CEST 2009

1	Linux version 2.6.13.1-ohio (1699) (gcc-Version 3.4.6) #1 Thu Jun 25 13:14:17 CEST 2009

Linux fritz.fonwlan.box 2.6.13.1-ohio #1 Thu Jun 25 13:14:17 CEST 2009 mips unknown

1	Linux fritz.fonwlan.box 2.6.13.1-ohio #1 Thu Jun 25 13:14:17 CEST 2009 mips unknown

system type             : MIPS OHIO
processor               : 0
cpu model               : MIPS 4KEc V4.8
BogoMIPS                : 211.35
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 16
extra interrupt vector  : yes
hardware watchpoint     : yes
VCED exceptions         : not available
VCEI exceptions         : not available

system type : MIPS OHIO

processor : 0

cpu model : MIPS 4KEc V4.8

BogoMIPS : 211.35

wait instruction : yes

microsecond timers : yes

tlb_entries : 16

extra interrupt vector : yes

hardware watchpoint : yes

VCED exceptions : not available

VCEI exceptions : not available

MemTotal:        30260 kB
MemFree:          1952 kB
Buffers:          3436 kB
Cached:          11988 kB
SwapCached:          0 kB
Active:           9620 kB
Inactive:        10356 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:        30260 kB
LowFree:          1952 kB
SwapTotal:           0 kB
SwapFree:            0 kB
Dirty:               0 kB
Writeback:           0 kB
Mapped:           8492 kB
Slab:             4872 kB
CommitLimit:     15128 kB
Committed_AS:     7688 kB
PageTables:        240 kB
VmallocTotal:  1048560 kB
VmallocUsed:      3096 kB
VmallocChunk:  1043980 kB

MemTotal: 30260 kB

MemFree: 1952 kB

Buffers: 3436 kB

Cached: 11988 kB

SwapCached: 0 kB

Active: 9620 kB

Inactive: 10356 kB

HighTotal: 0 kB

HighFree: 0 kB

LowTotal: 30260 kB

LowFree: 1952 kB

SwapTotal: 0 kB

SwapFree: 0 kB

Dirty: 0 kB

Writeback: 0 kB

Mapped: 8492 kB

Slab: 4872 kB

CommitLimit: 15128 kB

Committed_AS: 7688 kB

PageTables: 240 kB

VmallocTotal: 1048560 kB

VmallocUsed: 3096 kB

VmallocChunk: 1043980 kB

0002-0002 : piglet_reset
0012-0012 : piglet_irq_gpio

1 2	0002-0002 : piglet_reset 0012-0012 : piglet_irq_gpio

dev:    size   erasesize  name
mtd0: 00800000 00010000 "phys_mapped_flash"
mtd1: 006c8d00 00010000 "filesystem"
mtd2: 00770000 00010000 "kernel"
mtd3: 00010000 00010000 "bootloader"
mtd4: 00040000 00010000 "tffs (1)"
mtd5: 00040000 00010000 "tffs (2)"
mtd6: 00130000 00010000 "jffs2"
mtd7: 00640000 00010000 "Kernel without jffs2"

dev: size erasesize name

mtd0: 00800000 00010000 "phys_mapped_flash"

mtd1: 006c8d00 00010000 "filesystem"

mtd2: 00770000 00010000 "kernel"

mtd3: 00010000 00010000 "bootloader"

mtd4: 00040000 00010000 "tffs (1)"

mtd5: 00040000 00010000 "tffs (2)"

mtd6: 00130000 00010000 "jffs2"

mtd7: 00640000 00010000 "Kernel without jffs2"

rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro)
proc on /proc type proc (rw,nodiratime)
ramfs on /var type ramfs (rw)
/dev/mtdblock6 on /data type jffs2 (rw,noatime)
usbfs on /proc/bus/usb type usbfs (rw)
sysfs on /var/sysfs type sysfs (rw)
/dev/sda1 on /var/media/ftp/USB-FlashDisk-01 type vfat (rw,nodiratime,fmask=0000,dmask=0000,codepage=cp437,iocharset=iso8859-1,shortname=winnt)

rootfs on / type rootfs (rw)

/dev/root on / type squashfs (ro)

proc on /proc type proc (rw,nodiratime)

ramfs on /var type ramfs (rw)

/dev/mtdblock6 on /data type jffs2 (rw,noatime)

usbfs on /proc/bus/usb type usbfs (rw)

sysfs on /var/sysfs type sysfs (rw)

/dev/sda1 on /var/media/ftp/USB-FlashDisk-01 type vfat (rw,nodiratime,fmask=0000,dmask=0000,codepage=cp437,iocharset=iso8859-1,shortname=winnt)

HWRevision      127.1.1.0
ProductID       Fritz_Box_7170_AnnexA
SerialNumber    0000000000000000
annex   A
autoload        yes
bootloaderVersion       1.347
bootserport     tty0
country 99
cpufrequency    211968000
firstfreeaddress        0x946C0D14
firmware_version        avme
firmware_info   58.04.68
flashsize       0x00800000
jffs2_size      19
maca    00:1C:4A:26:AE:10
macb    00:1C:4A:26:AE:11
macwlan 00:1C:4A:07:96:72
macdsl  00:1C:4A:26:AE:12
memsize 0x02000000
modetty0        38400,n,8,1,hw
modetty1        38400,n,8,1,hw
mtd0    0x90000000,0x90000000
mtd1    0x90010000,0x90780000
mtd2    0x90000000,0x90010000
mtd3    0x90780000,0x907C0000
mtd4    0x907C0000,0x90800000
my_ipaddress    192.168.178.1
prompt  Eva_AVM
ptest
req_fullrate_freq       125000000
sysfrequency    125000000
tr069_passphrase        XYJkubNKuSsf
tr069_serial    00040E-001C4A26AE10
urlader-version 1347
usb_board_mac   00:1C:4A:26:AE:13
usb_rndis_mac   00:1C:4A:26:AE:14
usb_device_id   0x3D00
usb_revision_id 0x0200
usb_device_name USB DSL Device
usb_manufacturer_name   AVM
wlan_key        7411555752548263
wlan_cal        0006,03F3,0012,00F3,010A,00F6,010A,0352,0349

HWRevision 127.1.1.0

ProductID Fritz_Box_7170_AnnexA

SerialNumber 0000000000000000

annex A

autoload yes

bootloaderVersion 1.347

bootserport tty0

country 99

cpufrequency 211968000

firstfreeaddress 0x946C0D14

firmware_version avme

firmware_info 58.04.68

flashsize 0x00800000

jffs2_size 19

maca 00:1C:4A:26:AE:10

macb 00:1C:4A:26:AE:11

macwlan 00:1C:4A:07:96:72

macdsl 00:1C:4A:26:AE:12

memsize 0x02000000

modetty0 38400,n,8,1,hw

modetty1 38400,n,8,1,hw

mtd0 0x90000000,0x90000000

mtd1 0x90010000,0x90780000

mtd2 0x90000000,0x90010000

mtd3 0x90780000,0x907C0000

mtd4 0x907C0000,0x90800000

my_ipaddress 192.168.178.1

prompt Eva_AVM

ptest

req_fullrate_freq 125000000

sysfrequency 125000000

tr069_passphrase XYJkubNKuSsf

tr069_serial 00040E-001C4A26AE10

urlader-version 1347

usb_board_mac 00:1C:4A:26:AE:13

usb_rndis_mac 00:1C:4A:26:AE:14

usb_device_id 0x3D00

usb_revision_id 0x0200

usb_device_name USB DSL Device

usb_manufacturer_name AVM

wlan_key 7411555752548263

wlan_cal 0006,03F3,0012,00F3,010A,00F6,010A,0352,0349

vfat 11392 1 - Live 0xc00c6000
fat 49072 1 vfat, Live 0xc0159000
nls_cp437 5248 1 - Live 0xc00bb000
nls_iso8859_1 3584 1 - Live 0xc000b000
usb_storage 33296 1 - Live 0xc014f000
sd_mod 14864 2 - Live 0xc00ee000
scsi_mod 92560 2 usb_storage,sd_mod, Live 0xc0171000
userman 32496 2 - Live 0xc00f5000
kdsldmod 825648 5 userman, Live 0xc03ae000
usbahcicore 26064 0 - Live 0xc00be000
usbcore 113328 3 usb_storage,usbahcicore, Live 0xc0132000
capi_codec 129088 0 - Live 0xc0111000
isdn_fbox_fon4 895936 1 capi_codec, Live 0xc01ca000
ubik2 85712 2 capi_codec,isdn_fbox_fon4, Live 0xc002c000
tiatm 112544 1 ubik2, Live 0xc00ca000
jffs2 108832 1 - Live 0xc0045000
Piglet 10656 0 - Live 0xc001b000

vfat 11392 1 - Live 0xc00c6000

fat 49072 1 vfat, Live 0xc0159000

nls_cp437 5248 1 - Live 0xc00bb000

nls_iso8859_1 3584 1 - Live 0xc000b000

usb_storage 33296 1 - Live 0xc014f000

sd_mod 14864 2 - Live 0xc00ee000

scsi_mod 92560 2 usb_storage,sd_mod, Live 0xc0171000

userman 32496 2 - Live 0xc00f5000

kdsldmod 825648 5 userman, Live 0xc03ae000

usbahcicore 26064 0 - Live 0xc00be000

usbcore 113328 3 usb_storage,usbahcicore, Live 0xc0132000

capi_codec 129088 0 - Live 0xc0111000

isdn_fbox_fon4 895936 1 capi_codec, Live 0xc01ca000

ubik2 85712 2 capi_codec,isdn_fbox_fon4, Live 0xc002c000

tiatm 112544 1 ubik2, Live 0xc00ca000

jffs2 108832 1 - Live 0xc0045000

Piglet 10656 0 - Live 0xc001b000

BusyBox v1.8.2 (2008-09-04 11:11:03 CEST) multi-call binary
Copyright (C) 1998-2006 Erik Andersen, Rob Landley, and others.
Licensed under GPLv2. See source distribution for full notice.

Usage: busybox [function] [arguments]...
   or: [function] [arguments]...

        BusyBox is a multi-call binary that combines many common Unix
        utilities into a single executable.  Most people will create a
        link to busybox for each function they wish to use and BusyBox
        will act like whatever it was invoked as!

Currently defined functions:
        [, [[, ash, basename, cat, chmod, clear, cp, date, dd, dmesg, echo, egrep, env, ether-wake,
        false, fgrep, find, free, grep, halt, head, hostname, ifconfig, ifdown, ifup, inetd, init, insmod,
        kill, killall, ln, login, ls, lsmod, md5sum, mkdir, mknod, modprobe, more, mount, mv, nc, netstat,
        nohup, pidof, ping, poweroff, ps, pwd, realpath, reboot, rm, rmdir, rmmod, route, sed, setconsole,
        sh, sleep, stty, tail, tar, tee, telnetd, test, tftp, time, touch, tr, traceroute, true, tty,
        umount, uname, uniq, uptime, vconfig, vi, wget

BusyBox v1.8.2 (2008-09-04 11:11:03 CEST) multi-call binary

Licensed under GPLv2. See source distribution for full notice.

Usage: busybox [function] [arguments]...

or: [function] [arguments]...

BusyBox is a multi-call binary that combines many common Unix

utilities into a single executable. Most people will create a

link to busybox for each function they wish to use and BusyBox

will act like whatever it was invoked as!

Currently defined functions:

[, [[, ash, basename, cat, chmod, clear, cp, date, dd, dmesg, echo, egrep, env, ether-wake,

false, fgrep, find, free, grep, halt, head, hostname, ifconfig, ifdown, ifup, inetd, init, insmod,

kill, killall, ln, login, ls, lsmod, md5sum, mkdir, mknod, modprobe, more, mount, mv, nc, netstat,

nohup, pidof, ping, poweroff, ps, pwd, realpath, reboot, rm, rmdir, rmmod, route, sed, setconsole,

sh, sleep, stty, tail, tar, tee, telnetd, test, tftp, time, touch, tr, traceroute, true, tty,

umount, uname, uniq, uptime, vconfig, vi, wget

Linux version 2.6.13.1-ohio (1699) (gcc-Version 3.4.6) #1 Thu Jun 25 13:14:17 CEST 2009
memsize=32 MByte
flashsize=8 MByte
&_end=0x9423ee74 PFN_ALIGN(&_end)=0x9423f000 CPHYSADDR(PFN_ALIGN(&_end))=0x1423f000 memsize=0x2000000
CPU revision is: 00018448
[ohio_gpio_init]
Determined physical RAM map:
 memory: 0023f000 @ 14000000 (reserved)
 memory: 01dc1000 @ 1423f000 (usable)
On node 0 totalpages: 8192
[alloc_node_mem_map] reduce size from 2883616 Bytes to  262176 Bytes
[alloc_node_mem_map]: (org) sizeof(mem_map) = 262176 mem_map=0x94242000-0x94282020
[alloc_node_mem_map]: sizeof(mem_map) = 2883616 mem_map=0x93fc2000-0x94282020
zone=0 zone_size[j]=0x90112
realsize=8192
  DMA zone: 8192 pages, LIFO batch:3
zone=1 zone_size[j]=0x0
realsize=0
  Normal zone: 0 pages, LIFO batch:1
zone=2 zone_size[j]=0x0
realsize=0
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line:  console=ttyS0,38400n8r
[ld_mmu_r4xx0] memcpy((void *)(CAC_BASE   + 0x100), &except_vec2_generic, 0x30)
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 8kB, 4-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions). Base=0x9420578c
TLB synthesizer field overflow (simm)
Synthesized TLB load handler fastpath (34 instructions) Base=0x94208620.
TLB synthesizer field overflow (simm)
Synthesized TLB store handler fastpath (34 instructions) Base=0x94208820.
TLB synthesizer field overflow (simm)
Synthesized TLB modify handler fastpath (33 instructions) Base=0x94208a20.
PID hash table entries: 256 (order: 8, 4096 bytes)
CPU frequency 211.97 MHz
Using 105.984 MHz high precision timer.
[setup_irq]: irq 255 irqaction->handler 0x940430c0 (no_action+0x0/0x8 )
[register_console] enable commandline console 0
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 30092k/30468k available (1582k kernel code, 320k reserved, 377k data, 112k init, 0k highmem)
totalram_pages= 7537
Calibrating delay loop... 211.35 BogoMIPS (lpj=1056768)
loops_per_jiffy=1056768
Mount-cache hash table entries: 512
Checking for 'wait' instruction...  available.
Calling initcall 0x941f927c: helper_init+0x0/0x30()
Calling initcall 0x941f953c: ksysfs_init+0x0/0x3c()
Calling initcall 0x941fb460: filelock_init+0x0/0x48()
Calling initcall 0x941fbd80: init_script_binfmt+0x0/0xc()
Calling initcall 0x941fbd8c: init_elf_binfmt+0x0/0xc()
Calling initcall 0x94200b50: netlink_proto_init+0x0/0x2ac()
NET: Registered protocol family 16
Calling initcall 0x941fc614: kobject_uevent_init+0x0/0x50()
Calling initcall 0x941fc89c: tty_class_init+0x0/0x34()
Calling initcall 0x941f02c4: frame_info_init+0x0/0xb4()
Can't analyze prologue code at 9418a174
Calling initcall 0x941fb150: init_bio+0x0/0x17c()
Calling initcall 0x941fcf48: misc_init+0x0/0xc0()
Calling initcall 0x941fec5c: genhd_device_init+0x0/0x44()
Calling initcall 0x941ff110: init_mtd+0x0/0x48()
Calling initcall 0x941ffd20: input_init+0x0/0x1e0()
Calling initcall 0x94200258: proto_init+0x0/0x48()
Calling initcall 0x9420041c: net_dev_init+0x0/0x1dc()
Calling initcall 0x94200a48: pktsched_init+0x0/0xc8()
Calling initcall 0x94200b1c: tc_filter_init+0x0/0x34()
Calling initcall 0x941fb3b4: init_pipe_fs+0x0/0x6c()
Calling initcall 0x941fc72c: chr_dev_init+0x0/0xb4()
Calling initcall 0x941f88a4: create_proc_profile+0x0/0x64()
Calling initcall 0x941f8984: ioresources_init+0x0/0xc4()
Calling initcall 0x941f8b90: uid_cache_init+0x0/0x88()
Calling initcall 0x941f8f6c: param_sysfs_init+0x0/0x208()
Calling initcall 0x941f9174: init_posix_timers+0x0/0x108()
Calling initcall 0x941f92ac: init_posix_cpu_timers+0x0/0xd4()
Calling initcall 0x941f94fc: kallsyms_init+0x0/0x40()
Calling initcall 0x941fa7ac: init_per_zone_pages_min+0x0/0x64()
Calling initcall 0x941fabf0: pdflush_init+0x0/0x28()
Calling initcall 0x941fac18: cpucache_init+0x0/0x20()
Calling initcall 0x941faf64: kswapd_init+0x0/0x70()
Calling initcall 0x941fb018: procswaps_init+0x0/0x40()
Calling initcall 0x941fb058: init_tmpfs+0x0/0x3c()
Calling initcall 0x941fb420: fasync_init+0x0/0x40()
Calling initcall 0x941fbb24: aio_setup+0x0/0x8c()
Calling initcall 0x941fbbb0: inotify_setup+0x0/0xf4()
Calling initcall 0x941fbca4: eventpoll_init+0x0/0xdc()
Calling initcall 0x941fc2dc: init_devpts_fs+0x0/0x48()
Calling initcall 0x941fc324: init_squashfs_fs+0x0/0xe4()
Squashfs 2.2-r2b (released 2006/02/23) (C) 2002-2005 Phillip Lougher
Calling initcall 0x941fc408: init_ramfs_fs+0x0/0xc()
Calling initcall 0x941fc420: ipc_init+0x0/0x30()
Calling initcall 0x941fc7e0: rand_initialize+0x0/0x3c()
Calling initcall 0x941fc8d0: tty_init+0x0/0x184()
Calling initcall 0x941fca54: pty_init+0x0/0x4f4()
Calling initcall 0x941fd008: avm_net_trace_init+0x0/0x80()
avm_net_trace: Up and running.
Calling initcall 0x941fd088: avm_power_init+0x0/0x2dc()
[avm_power]Ohio250 detected -> overclocking possible
Calling initcall 0x941fd364: avm_sammel_init+0x0/0x158()
[avm] configured: watchdog eventled enable shift register enable direct gpio
        gpio usage: reset=12 clock=13 store=10 data=9
AR7WDT: Watchdog Driver for AR7 Hardware (Version 1.0, build: Jun 25 2009 13:11:54)
Calling initcall 0x941fe2ac: serial8250_init+0x0/0x10c()
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
[uart_add_one_port]
ttyS0 at MMIO 0x0 (irq = 15) is a OHIO_UART
[uart_add_one_port] dont register console port->type = 16
port->cons = 0x941c9fe0 port->cons->flags = 0x7
[uart_add_one_port] success
Calling initcall 0x941feca0: noop_init+0x0/0xc()
io scheduler noop registered
Calling initcall 0x941fecac: cpphy_entry_probe+0x0/0x1dc()
[cpmac] Version: URL: svn://EmbeddedVM/home/SVN/drivers/cpmac/tags/1.98-r684-trunk-AR8216_MC  -  Revision 538:685  -  Do 25. Jun 13:13:00 CEST 2009
[avm_event_source_trigger]: not registered
[cpmac] [cpmac_if_register] dev cpmac0 (phy_id 0) registered
Calling initcall 0x941fef18: net_olddevs_init+0x0/0x100()
Calling initcall 0x941ff080: tun_init+0x0/0x90()
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Calling initcall 0x941ff158: cmdline_parser_init+0x0/0xc()
Calling initcall 0x941ff164: init_mtdchar+0x0/0xc0()
Calling initcall 0x941ff224: init_mtdblock+0x0/0xc()
Calling initcall 0x941ff230: cfi_probe_init+0x0/0x24()
Calling initcall 0x941ff254: cfi_amdstd_init+0x0/0x30()
Calling initcall 0x941ff284: cfi_intelext_init+0x0/0x4c()
Calling initcall 0x941ff2d0: jedec_probe_init+0x0/0x24()
Calling initcall 0x941ff2f4: map_ram_init+0x0/0x24()
Calling initcall 0x941ff318: init_physmap+0x0/0x170()
physmap flash device: 400000 at 10000000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
phys_mapped_flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
RedBoot partition parsing not available
Calling initcall 0x941ff488: platram_init+0x0/0x30()
Generic platform RAM MTD, (c) 2004 Simtec Electronics
Calling initcall 0x941ff4b8: init_ohio_flash+0x0/0x868()
Ohio flash driver (size->0x400000 mem->0x10000000)
flash_size=0x800000
flash_mask=0xffffff
Ohio flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
[genprobe_ident_chips] 4 i 0 j 0
[genprobe_ident_chips] 5 i 0 j 1
 Amd/Fujitsu Extended Query Table at 0x0040
Ohio flash memory: Swapping erase regions for broken CFI table.
number of CFI chips: 1
[mtd]: jffs2_size = 19 * 64KByte (0x130000 Bytes)
[ohio_find_hidden_filesystem]: super block found: bytes_used: 0x594263/5849699
[init_ohio_flash] find hidden filesystem size=0x6c8d00 offset=0xb7300
[mtd] configure jffs2 partition
[mtd] fs_size=0x640000 max=0x130000 is=0x130000 max jffs2_size value 19
[mtd] ohio_flash_map: name=Ohio flash memory bankwidth=2 virt=0xb0000000 phys=0x10000000 size=0x800000
Creating 7 MTD partitions on "Ohio flash memory":
0x000b7300-0x00780000 : "filesystem"
        'nor-flash'
        'Bits can be cleared (flash)'
        'Has an erase function'
mtd: partition "filesystem" doesn't start on an erase block boundary -- force read-only
0x00010000-0x00780000 : "kernel"
        'nor-flash'
        'Bits can be cleared (flash)'
        'Has an erase function'
0x00000000-0x00010000 : "bootloader"
        'nor-flash'
        'Bits can be cleared (flash)'
        'Has an erase function'
0x00780000-0x007c0000 : "tffs (1)"
        'nor-flash'
        'Bits can be cleared (flash)'
        'Has an erase function'
0x007c0000-0x00800000 : "tffs (2)"
        'nor-flash'
        'Bits can be cleared (flash)'
        'Has an erase function'
0x00650000-0x00780000 : "jffs2"
        'nor-flash'
        'Bits can be cleared (flash)'
        'Has an erase function'
0x00010000-0x00650000 : "Kernel without jffs2"
        'nor-flash'
        'Bits can be cleared (flash)'
        'Has an erase function'
partition_info[0]: name=filesystem offset=b7300 size=6c8d00
partition_info[0]: 0xb00b7300: 0x73717368 0x756
partition_info[1]: name=kernel offset=10000 size=770000
partition_info[1]: 0xb0010000: 0xfeed1281 0xa72cc
partition_info[2]: name=bootloader offset=0 size=10000
partition_info[2]: 0xb0000000: 0x40809000 0x40809800
partition_info[3]: name=tffs (1) offset=780000 size=40000
partition_info[3]: 0xb0780000: 0x40001 0xfbffffff
partition_info[4]: name=tffs (2) offset=7c0000 size=40000
partition_info[4]: 0xb07c0000: 0x40001 0xfcffffff
partition_info[5]: name=jffs2 offset=650000 size=130000
partition_info[5]: 0xb0650000: 0x20031985 0xc
partition_info[6]: name=Kernel without jffs2 offset=10000 size=640000
partition_info[6]: 0xb0010000: 0xfeed1281 0xa72cc
Calling initcall 0x941fff00: kcapi_init+0x0/0x9c()
Calling initcall 0x94200044: capi_oslib_init+0x0/0x8()
Calling initcall 0x94200b10: blackhole_module_init+0x0/0xc()
Calling initcall 0x94201800: inet_init+0x0/0x504()
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
Calling initcall 0x94204218: init+0x0/0x8()
Calling initcall 0x94204220: bictcp_register+0x0/0xc()
TCP bic registered
Calling initcall 0x9420422c: mcfw_init_module+0x0/0x2c()
mcfw: IGMPv3 fast forwarding
Calling initcall 0x94204258: af_unix_init+0x0/0xa0()
NET: Registered protocol family 1
Calling initcall 0x942042f8: packet_init+0x0/0x80()
NET: Registered protocol family 17
Calling initcall 0x94204378: br_init+0x0/0x68()
Calling initcall 0x94204434: atm_init+0x0/0xec()
NET: Registered protocol family 8
NET: Registered protocol family 20
Calling initcall 0x942045d8: br2684_init+0x0/0x54()
Calling initcall 0x941ef024: ohio_install_dummy_irq_functions+0x0/0x58()
[setup_irq]: irq 1 irqaction->handler 0x94001590 (dummy_timer_irq+0x0/0x14 )
[setup_irq]: irq 6 irqaction->handler 0x940015a4 (dummy_system_irq_2+0x0/0x14 )
Calling initcall 0x940017e4: ohio_late_init+0x0/0x3c()
[ohio_late_init]
Calling initcall 0x941ef160: ohio_clk_switch_init+0x0/0x60()
Calling initcall 0x941ef3dc: speedup_init+0x0/0x3c()
Calling initcall 0x941fc81c: seqgen_init+0x0/0x20()
Calling initcall 0x940ce770: avm_event_push_button_init+0x0/0x130()
[avm_new] push_button_gpio=8 value=1 enabled
Calling initcall 0x941fdb20: tffs_init+0x0/0x224()
TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
      mount on mtd4 and mtd5 (double buffering)
Adam2 environment variables API installed.
Calling initcall 0x941fe970: early_uart_console_switch+0x0/0xb4()
Calling initcall 0x9412a1e8: net_random_reseed+0x0/0x34()
Calling initcall 0x94202d20: ip_auto_config+0x0/0x1120()
[prepare_namespace] new mount root /dev/mtdblock1
use lzma compression
VFS: Mounted root (squashfs filesystem) readonly.
Freeing prom memory: 0kb freed
Freeing unused kernel memory: 112k freed (7565 free)
[setup_irq]: irq 15 irqaction->handler 0x940da99c (serial8250_interrupt+0x0/0x13c )
AR7WDT: System Init UEberwachung 240 Sekunden
TFFS Name Table E
Piglet: module license '
(C) Copyright 2005 by AVM
' taints kernel.
EMIF: asize=1 ta=3 r_hold=0 w_strobe=6 r_strobe=6 ew=1
[piglet]McSP: rFS: 8000 Hz rCLK:2048285 Hz
[avm_new]push_button 'Wlan-Taster', released: GPIO=8 presses=5000 key=button_key_2
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
registered device TI Avalanche SAR
tiatm driver (patch_annex=0xc00e40cc)
[tiatm] Set StrictPriority=0
DSP binary filesize = 389206 bytes
[dsl_ur8] dsl serial number successfully set to "465249545a21426f7820466f6e20574c414e2037093030314334413236414531"
[tiatm] INFO V2U-BRIDGEREGISTER: 0x00000019
[avm_power]Ohio250 detected -> overclocking possible
[avm_power]#### boostVoltage: DSP Core voltage set to 1,5 V ####
[setup_irq]: irq 23 irqaction->handler 0xc00ca208 (tn7atm_sar_irq+0x0/0x30 [tiatm] )
[setup_irq]: irq 31 irqaction->handler 0xc00ca238 (tn7atm_dsl_irq+0x0/0x28 [tiatm] )
[tiatm]: Powermanagment (States => 1,3,10) supported!
[tiatm] AvmInterface length: 44
[avm_power]#### boostVoltage: DSP Core voltage set to 1,65 V ####
Texas Instruments ATM driver: version:[4.08.00.00]
ubik2 driver (ubik2 - 0x10=0xc003efd4)
atm_dsp_register_ubik2: ubik2_ToMIPS_notify=0xc002cbfc
atm_dsp_register_ubik2: dsp mem pointer 0xa1c1644c
ubik2_init_interface: DSP-Link Version v3 8480

[ubik2_debug] eof_sync =1

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

252

253

254

255

256

257

258

259

260

261

262

263

264

265

266

267

268

269

270

271

272

Linux version 2.6.13.1-ohio (1699) (gcc-Version 3.4.6) #1 Thu Jun 25 13:14:17 CEST 2009

memsize=32 MByte

flashsize=8 MByte

&_end=0x9423ee74 PFN_ALIGN(&_end)=0x9423f000 CPHYSADDR(PFN_ALIGN(&_end))=0x1423f000 memsize=0x2000000

CPU revision is: 00018448

[ohio_gpio_init]

Determined physical RAM map:

memory: 0023f000 @ 14000000 (reserved)

memory: 01dc1000 @ 1423f000 (usable)

On node 0 totalpages: 8192

[alloc_node_mem_map] reduce size from 2883616 Bytes to 262176 Bytes

[alloc_node_mem_map]: (org) sizeof(mem_map) = 262176 mem_map=0x94242000-0x94282020

[alloc_node_mem_map]: sizeof(mem_map) = 2883616 mem_map=0x93fc2000-0x94282020

zone=0 zone_size[j]=0x90112

realsize=8192

DMA zone: 8192 pages, LIFO batch:3

zone=1 zone_size[j]=0x0

realsize=0

Normal zone: 0 pages, LIFO batch:1

zone=2 zone_size[j]=0x0

realsize=0

HighMem zone: 0 pages, LIFO batch:1

Built 1 zonelists

Kernel command line: console=ttyS0,38400n8r

[ld_mmu_r4xx0] memcpy((void *)(CAC_BASE + 0x100), &except_vec2_generic, 0x30)

Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.

Primary data cache 8kB, 4-way, linesize 16 bytes.

Synthesized TLB refill handler (20 instructions). Base=0x9420578c

TLB synthesizer field overflow (simm)

Synthesized TLB load handler fastpath (34 instructions) Base=0x94208620.

TLB synthesizer field overflow (simm)

Synthesized TLB store handler fastpath (34 instructions) Base=0x94208820.

TLB synthesizer field overflow (simm)

Synthesized TLB modify handler fastpath (33 instructions) Base=0x94208a20.

PID hash table entries: 256 (order: 8, 4096 bytes)

CPU frequency 211.97 MHz

Using 105.984 MHz high precision timer.

[setup_irq]: irq 255 irqaction->handler 0x940430c0 (no_action+0x0/0x8 )

[register_console] enable commandline console 0

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 30092k/30468k available (1582k kernel code, 320k reserved, 377k data, 112k init, 0k highmem)

totalram_pages= 7537

Calibrating delay loop... 211.35 BogoMIPS (lpj=1056768)

loops_per_jiffy=1056768

Mount-cache hash table entries: 512

Checking for 'wait' instruction... available.

Calling initcall 0x941f927c: helper_init+0x0/0x30()

Calling initcall 0x941f953c: ksysfs_init+0x0/0x3c()

Calling initcall 0x941fb460: filelock_init+0x0/0x48()

Calling initcall 0x941fbd80: init_script_binfmt+0x0/0xc()

Calling initcall 0x941fbd8c: init_elf_binfmt+0x0/0xc()

Calling initcall 0x94200b50: netlink_proto_init+0x0/0x2ac()

NET: Registered protocol family 16

Calling initcall 0x941fc614: kobject_uevent_init+0x0/0x50()

Calling initcall 0x941fc89c: tty_class_init+0x0/0x34()

Calling initcall 0x941f02c4: frame_info_init+0x0/0xb4()

Can't analyze prologue code at 9418a174

Calling initcall 0x941fb150: init_bio+0x0/0x17c()

Calling initcall 0x941fcf48: misc_init+0x0/0xc0()

Calling initcall 0x941fec5c: genhd_device_init+0x0/0x44()

Calling initcall 0x941ff110: init_mtd+0x0/0x48()

Calling initcall 0x941ffd20: input_init+0x0/0x1e0()

Calling initcall 0x94200258: proto_init+0x0/0x48()

Calling initcall 0x9420041c: net_dev_init+0x0/0x1dc()

Calling initcall 0x94200a48: pktsched_init+0x0/0xc8()

Calling initcall 0x94200b1c: tc_filter_init+0x0/0x34()

Calling initcall 0x941fb3b4: init_pipe_fs+0x0/0x6c()

Calling initcall 0x941fc72c: chr_dev_init+0x0/0xb4()

Calling initcall 0x941f88a4: create_proc_profile+0x0/0x64()

Calling initcall 0x941f8984: ioresources_init+0x0/0xc4()

Calling initcall 0x941f8b90: uid_cache_init+0x0/0x88()

Calling initcall 0x941f8f6c: param_sysfs_init+0x0/0x208()

Calling initcall 0x941f9174: init_posix_timers+0x0/0x108()

Calling initcall 0x941f92ac: init_posix_cpu_timers+0x0/0xd4()

Calling initcall 0x941f94fc: kallsyms_init+0x0/0x40()

Calling initcall 0x941fa7ac: init_per_zone_pages_min+0x0/0x64()

Calling initcall 0x941fabf0: pdflush_init+0x0/0x28()

Calling initcall 0x941fac18: cpucache_init+0x0/0x20()

Calling initcall 0x941faf64: kswapd_init+0x0/0x70()

Calling initcall 0x941fb018: procswaps_init+0x0/0x40()

Calling initcall 0x941fb058: init_tmpfs+0x0/0x3c()

Calling initcall 0x941fb420: fasync_init+0x0/0x40()

Calling initcall 0x941fbb24: aio_setup+0x0/0x8c()

Calling initcall 0x941fbbb0: inotify_setup+0x0/0xf4()

Calling initcall 0x941fbca4: eventpoll_init+0x0/0xdc()

Calling initcall 0x941fc2dc: init_devpts_fs+0x0/0x48()

Calling initcall 0x941fc324: init_squashfs_fs+0x0/0xe4()

Calling initcall 0x941fc408: init_ramfs_fs+0x0/0xc()

Calling initcall 0x941fc420: ipc_init+0x0/0x30()

Calling initcall 0x941fc7e0: rand_initialize+0x0/0x3c()

Calling initcall 0x941fc8d0: tty_init+0x0/0x184()

Calling initcall 0x941fca54: pty_init+0x0/0x4f4()

Calling initcall 0x941fd008: avm_net_trace_init+0x0/0x80()

avm_net_trace: Up and running.

Calling initcall 0x941fd088: avm_power_init+0x0/0x2dc()

[avm_power]Ohio250 detected -> overclocking possible

Calling initcall 0x941fd364: avm_sammel_init+0x0/0x158()

[avm] configured: watchdog eventled enable shift register enable direct gpio

gpio usage: reset=12 clock=13 store=10 data=9

AR7WDT: Watchdog Driver for AR7 Hardware (Version 1.0, build: Jun 25 2009 13:11:54)

Calling initcall 0x941fe2ac: serial8250_init+0x0/0x10c()

Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled

[uart_add_one_port]

ttyS0 at MMIO 0x0 (irq = 15) is a OHIO_UART

[uart_add_one_port] dont register console port->type = 16

port->cons = 0x941c9fe0 port->cons->flags = 0x7

[uart_add_one_port] success

Calling initcall 0x941feca0: noop_init+0x0/0xc()

io scheduler noop registered

Calling initcall 0x941fecac: cpphy_entry_probe+0x0/0x1dc()

[cpmac] Version: URL: svn://EmbeddedVM/home/SVN/drivers/cpmac/tags/1.98-r684-trunk-AR8216_MC - Revision 538:685 - Do 25. Jun 13:13:00 CEST 2009

[avm_event_source_trigger]: not registered

[cpmac] [cpmac_if_register] dev cpmac0 (phy_id 0) registered

Calling initcall 0x941fef18: net_olddevs_init+0x0/0x100()

Calling initcall 0x941ff080: tun_init+0x0/0x90()

tun: Universal TUN/TAP device driver, 1.6

Calling initcall 0x941ff158: cmdline_parser_init+0x0/0xc()

Calling initcall 0x941ff164: init_mtdchar+0x0/0xc0()

Calling initcall 0x941ff224: init_mtdblock+0x0/0xc()

Calling initcall 0x941ff230: cfi_probe_init+0x0/0x24()

Calling initcall 0x941ff254: cfi_amdstd_init+0x0/0x30()

Calling initcall 0x941ff284: cfi_intelext_init+0x0/0x4c()

Calling initcall 0x941ff2d0: jedec_probe_init+0x0/0x24()

Calling initcall 0x941ff2f4: map_ram_init+0x0/0x24()

Calling initcall 0x941ff318: init_physmap+0x0/0x170()

physmap flash device: 400000 at 10000000

phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank

Amd/Fujitsu Extended Query Table at 0x0040

phys_mapped_flash: Swapping erase regions for broken CFI table.

number of CFI chips: 1

RedBoot partition parsing not available

Calling initcall 0x941ff488: platram_init+0x0/0x30()

Calling initcall 0x941ff4b8: init_ohio_flash+0x0/0x868()

Ohio flash driver (size->0x400000 mem->0x10000000)

flash_size=0x800000

flash_mask=0xffffff

Ohio flash memory: Found 1 x16 devices at 0x0 in 16-bit bank

[genprobe_ident_chips] 4 i 0 j 0

[genprobe_ident_chips] 5 i 0 j 1

Amd/Fujitsu Extended Query Table at 0x0040

Ohio flash memory: Swapping erase regions for broken CFI table.

number of CFI chips: 1

[mtd]: jffs2_size = 19 * 64KByte (0x130000 Bytes)

[ohio_find_hidden_filesystem]: super block found: bytes_used: 0x594263/5849699

[init_ohio_flash] find hidden filesystem size=0x6c8d00 offset=0xb7300

[mtd] configure jffs2 partition

[mtd] fs_size=0x640000 max=0x130000 is=0x130000 max jffs2_size value 19

[mtd] ohio_flash_map: name=Ohio flash memory bankwidth=2 virt=0xb0000000 phys=0x10000000 size=0x800000

Creating 7 MTD partitions on "Ohio flash memory":

0x000b7300-0x00780000 : "filesystem"

'nor-flash'

'Bits can be cleared (flash)'

'Has an erase function'

mtd: partition "filesystem" doesn't start on an erase block boundary -- force read-only

0x00010000-0x00780000 : "kernel"

'nor-flash'

'Bits can be cleared (flash)'

'Has an erase function'

0x00000000-0x00010000 : "bootloader"

'nor-flash'

'Bits can be cleared (flash)'

'Has an erase function'

0x00780000-0x007c0000 : "tffs (1)"

'nor-flash'

'Bits can be cleared (flash)'

'Has an erase function'

0x007c0000-0x00800000 : "tffs (2)"

'nor-flash'

'Bits can be cleared (flash)'

'Has an erase function'

0x00650000-0x00780000 : "jffs2"

'nor-flash'

'Bits can be cleared (flash)'

'Has an erase function'

0x00010000-0x00650000 : "Kernel without jffs2"

'nor-flash'

'Bits can be cleared (flash)'

'Has an erase function'

partition_info[0]: name=filesystem offset=b7300 size=6c8d00

partition_info[0]: 0xb00b7300: 0x73717368 0x756

partition_info[1]: name=kernel offset=10000 size=770000

partition_info[1]: 0xb0010000: 0xfeed1281 0xa72cc

partition_info[2]: name=bootloader offset=0 size=10000

partition_info[2]: 0xb0000000: 0x40809000 0x40809800

partition_info[3]: name=tffs (1) offset=780000 size=40000

partition_info[3]: 0xb0780000: 0x40001 0xfbffffff

partition_info[4]: name=tffs (2) offset=7c0000 size=40000

partition_info[4]: 0xb07c0000: 0x40001 0xfcffffff

partition_info[5]: name=jffs2 offset=650000 size=130000

partition_info[5]: 0xb0650000: 0x20031985 0xc

partition_info[6]: name=Kernel without jffs2 offset=10000 size=640000

partition_info[6]: 0xb0010000: 0xfeed1281 0xa72cc

Calling initcall 0x941fff00: kcapi_init+0x0/0x9c()

Calling initcall 0x94200044: capi_oslib_init+0x0/0x8()

Calling initcall 0x94200b10: blackhole_module_init+0x0/0xc()

Calling initcall 0x94201800: inet_init+0x0/0x504()

NET: Registered protocol family 2

IP route cache hash table entries: 512 (order: -1, 2048 bytes)

TCP established hash table entries: 2048 (order: 2, 16384 bytes)

TCP bind hash table entries: 2048 (order: 1, 8192 bytes)

TCP: Hash tables configured (established 2048 bind 2048)

TCP reno registered

Calling initcall 0x94204218: init+0x0/0x8()

Calling initcall 0x94204220: bictcp_register+0x0/0xc()

TCP bic registered

Calling initcall 0x9420422c: mcfw_init_module+0x0/0x2c()

mcfw: IGMPv3 fast forwarding

Calling initcall 0x94204258: af_unix_init+0x0/0xa0()

NET: Registered protocol family 1

Calling initcall 0x942042f8: packet_init+0x0/0x80()

NET: Registered protocol family 17

Calling initcall 0x94204378: br_init+0x0/0x68()

Calling initcall 0x94204434: atm_init+0x0/0xec()

NET: Registered protocol family 8

NET: Registered protocol family 20

Calling initcall 0x942045d8: br2684_init+0x0/0x54()

Calling initcall 0x941ef024: ohio_install_dummy_irq_functions+0x0/0x58()

[setup_irq]: irq 1 irqaction->handler 0x94001590 (dummy_timer_irq+0x0/0x14 )

[setup_irq]: irq 6 irqaction->handler 0x940015a4 (dummy_system_irq_2+0x0/0x14 )

Calling initcall 0x940017e4: ohio_late_init+0x0/0x3c()

[ohio_late_init]

Calling initcall 0x941ef160: ohio_clk_switch_init+0x0/0x60()

Calling initcall 0x941ef3dc: speedup_init+0x0/0x3c()

Calling initcall 0x941fc81c: seqgen_init+0x0/0x20()

Calling initcall 0x940ce770: avm_event_push_button_init+0x0/0x130()

[avm_new] push_button_gpio=8 value=1 enabled

Calling initcall 0x941fdb20: tffs_init+0x0/0x224()

TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)

mount on mtd4 and mtd5 (double buffering)

Adam2 environment variables API installed.

Calling initcall 0x941fe970: early_uart_console_switch+0x0/0xb4()

Calling initcall 0x9412a1e8: net_random_reseed+0x0/0x34()

Calling initcall 0x94202d20: ip_auto_config+0x0/0x1120()

[prepare_namespace] new mount root /dev/mtdblock1

use lzma compression

VFS: Mounted root (squashfs filesystem) readonly.

Freeing prom memory: 0kb freed

Freeing unused kernel memory: 112k freed (7565 free)

[setup_irq]: irq 15 irqaction->handler 0x940da99c (serial8250_interrupt+0x0/0x13c )

AR7WDT: System Init UEberwachung 240 Sekunden

TFFS Name Table E

Piglet: module license '

' taints kernel.

EMIF: asize=1 ta=3 r_hold=0 w_strobe=6 r_strobe=6 ew=1

[piglet]McSP: rFS: 8000 Hz rCLK:2048285 Hz

[avm_new]push_button 'Wlan-Taster', released: GPIO=8 presses=5000 key=button_key_2

registered device TI Avalanche SAR

tiatm driver (patch_annex=0xc00e40cc)

[tiatm] Set StrictPriority=0

DSP binary filesize = 389206 bytes

[dsl_ur8] dsl serial number successfully set to "465249545a21426f7820466f6e20574c414e2037093030314334413236414531"

[tiatm] INFO V2U-BRIDGEREGISTER: 0x00000019

[avm_power]Ohio250 detected -> overclocking possible

[avm_power]#### boostVoltage: DSP Core voltage set to 1,5 V ####

[setup_irq]: irq 23 irqaction->handler 0xc00ca208 (tn7atm_sar_irq+0x0/0x30 [tiatm] )

[setup_irq]: irq 31 irqaction->handler 0xc00ca238 (tn7atm_dsl_irq+0x0/0x28 [tiatm] )

[tiatm]: Powermanagment (States => 1,3,10) supported!

[tiatm] AvmInterface length: 44

[avm_power]#### boostVoltage: DSP Core voltage set to 1,65 V ####

Texas Instruments ATM driver: version:[4.08.00.00]

ubik2 driver (ubik2 - 0x10=0xc003efd4)

atm_dsp_register_ubik2: ubik2_ToMIPS_notify=0xc002cbfc

atm_dsp_register_ubik2: dsp mem pointer 0xa1c1644c

ubik2_init_interface: DSP-Link Version v3 8480

[ubik2_debug] eof_sync =1

PHP commando of data opties opgeven

Door Sebastiaan Geplaatst op 2014-12-08 Geplaatst in PHP Script Getagd met Commandolijn, Data, Gegevens, HTTP, PHP, URL

Er zijn verschillende manieren om data of gegevens door te geven aan een PHP script van “buitenaf”, dit kan doormiddel van de HTTP URL of via een commandolijn, op deze pagina staan enkele voorbeelden. Een commando of data via de …

PHP commando of data opties opgeven Lees meer »

Plugwise Smile P1 – Locatie data gegevens

Door Sebastiaan Geplaatst op 2014-12-07 Geplaatst in Plugwise - Smile P1 Getagd met Gegevens, Plugwise, Smile P1, Uitlezen, XML

De Plugwise Smile P1 gegevens kun je benaderen via je webbrowser, deze staan in deze locatie: http://192.168.X.X/smartmeter/modules de output is een gegevens dump in XML formaat, en ziet er zo uit: (onderstaande xml dump is van firmware v1.2.x)

<?xml version="1.0" encoding="ISO-8859-1"?>
<modules>
    <module id='49ffc1e96e6d4cb00de162ddb00a8c4b'>
        <cumulative_logs>
            <cumulative_log>
                <last_consecutive_log_date>2014-12-07T10:30:00+00:00</last_consecutive_log_date>
                <type>gas_consumed</type>
                <unit>m3</unit>
                <period start_date="2012-12-07T17:00:00+00:00" end_date="2014-12-07T10:00:00+00:00">
                    <measurement log_date="2014-12-07T10:00:00+00:00">1072.922</measurement>
                </period>
            </cumulative_log>
        </cumulative_logs>
        <point_logs>
        </point_logs>
    </module>
    <module id='a6cd3610e5ba404a81cdc26aa82a65cb'>
        <vendor_name>Kamstrup</vendor_name>
        <vendor_model>KMP5 KA6U001600000912</vendor_model>
        <cumulative_logs>
            <cumulative_log>
                <last_consecutive_log_date>2014-12-07T10:30:00+00:00</last_consecutive_log_date>
                <type>electricity_consumed</type>
                <unit>Wh</unit>
                <period start_date="2012-12-07T17:00:00+00:00" end_date="2014-12-07T10:33:01+00:00">
                    <measurement log_date="2014-12-07T10:33:01+00:00" tariff_type="nl_peak">4916945</measurement>
                </period>
            </cumulative_log>
            <cumulative_log>
                <last_consecutive_log_date>2014-12-07T10:30:00+00:00</last_consecutive_log_date>
                <type>electricity_consumed</type>
                <unit>Wh</unit>
                <period start_date="2012-12-07T17:00:00+00:00" end_date="2014-12-07T10:33:01+00:00">
                    <measurement log_date="2014-12-07T10:33:01+00:00" tariff_type="nl_offpeak">5321183</measurement>
                </period>
            </cumulative_log>
            <cumulative_log>
                <last_consecutive_log_date>2014-12-07T10:30:00+00:00</last_consecutive_log_date>
                <type>electricity_produced</type>
                <unit>Wh</unit>
                <period start_date="2012-12-07T17:00:00+00:00" end_date="2014-12-07T10:33:01+00:00">
                    <measurement log_date="2014-12-07T10:33:01+00:00" tariff_type="nl_peak">0</measurement>
                </period>
            </cumulative_log>
            <cumulative_log>
                <last_consecutive_log_date>2014-12-07T10:30:00+00:00</last_consecutive_log_date>
                <type>electricity_produced</type>
                <unit>Wh</unit>
                <period start_date="2012-12-07T17:00:00+00:00" end_date="2014-12-07T10:33:01+00:00">
                    <measurement log_date="2014-12-07T10:33:01+00:00" tariff_type="nl_offpeak">0</measurement>
                </period>
            </cumulative_log>
        </cumulative_logs>
        <point_logs>
            <point_log>
                <last_consecutive_log_date>2014-12-07T10:30:00+00:00</last_consecutive_log_date>
                <type>electricity_consumed</type>
                <unit>W</unit>
                <period start_date="2012-12-07T17:00:00+00:00" end_date="2014-12-07T10:33:01+00:00">
                    <measurement log_date="2014-12-07T10:33:01+00:00">2670</measurement>
                </period>
            </point_log>
            <point_log>
                <last_consecutive_log_date>2014-12-07T10:30:00+00:00</last_consecutive_log_date>
                <type>electricity_produced</type>
                <unit>W</unit>
                <period start_date="2012-12-07T17:00:00+00:00" end_date="2014-12-07T10:33:01+00:00">
                    <measurement log_date="2014-12-07T10:33:01+00:00">0</measurement>
                </period>
            </point_log>
        </point_logs>
    </module>
    <module id='be13ff200adc43b79b001ffa74f0ae2e'>
        <vendor_name>Kamstrup</vendor_name>
        <vendor_model>KMP5 KA6U001600000912</vendor_model>
        <cumulative_logs>
        </cumulative_logs>
        <point_logs>
        </point_logs>
    </module>
</modules>

<?xml version="1.0" encoding="ISO-8859-1"?>

<cumulative_logs>

<cumulative_log>

<last_consecutive_log_date>2014-12-07T10:30:00+00:00</last_consecutive_log_date>

<type>gas_consumed</type>

</period>

</cumulative_log>

</cumulative_logs>

<point_logs>

</point_logs>

</module>

<vendor_name>Kamstrup</vendor_name>

<vendor_model>KMP5 KA6U001600000912</vendor_model>

<cumulative_logs>

<cumulative_log>

<last_consecutive_log_date>2014-12-07T10:30:00+00:00</last_consecutive_log_date>

<type>electricity_consumed</type>

</period>

</cumulative_log>

<cumulative_log>

<last_consecutive_log_date>2014-12-07T10:30:00+00:00</last_consecutive_log_date>

<type>electricity_consumed</type>

</period>

</cumulative_log>

<cumulative_log>

<last_consecutive_log_date>2014-12-07T10:30:00+00:00</last_consecutive_log_date>

<type>electricity_produced</type>

</period>

</cumulative_log>

<cumulative_log>

<last_consecutive_log_date>2014-12-07T10:30:00+00:00</last_consecutive_log_date>

<type>electricity_produced</type>

</period>

</cumulative_log>

</cumulative_logs>

<point_logs>

<point_log>

<last_consecutive_log_date>2014-12-07T10:30:00+00:00</last_consecutive_log_date>

<type>electricity_consumed</type>

</period>

</point_log>

<point_log>

<last_consecutive_log_date>2014-12-07T10:30:00+00:00</last_consecutive_log_date>

<type>electricity_produced</type>

</period>

</point_log>

</point_logs>

</module>

<vendor_name>Kamstrup</vendor_name>

<vendor_model>KMP5 KA6U001600000912</vendor_model>

<cumulative_logs>

</cumulative_logs>

<point_logs>

</point_logs>

</module>

</modules>

Zoeken

Tag: Gegevens

Excel – Importeer data uit een CSV bestand (VB Script)

SIP Telefonie – Wachtwoord achterhalen van provider (telfort)

Arduino Shield – Ethernet W5100 – Data via webbrowser

Fritz!Box Fon WLAN 7170 – Linux gegevens

PHP commando of data opties opgeven

Plugwise Smile P1 – Locatie data gegevens