USB Apparaten Archieven - DomoticX Knowledge Center

Categorie: USB Apparaten

USB Apparaten

USB Apparaat – USB 2.0 to LAN RJ45 Ethernet 10/100Mbps RD9700 chip

by SebastiaanPosted on 2020-06-12 Geplaatst in USB Apparaten

Intergrated fst ethernet MACOS,physical chip and transceiver inone chip Supports 10Mb/s and 100Mb/s N-way auto-negetiation operation Compliant to USB interface version 1.0/1.1/2.0 Full-speed(12Mb/s) USB device Support 4 end points Half/Full duplex 10/100Mbps …

USB Apparaat – USB 2.0 to LAN RJ45 Ethernet 10/100Mbps RD9700 chip Read More »

Getagd met CoreChips, RD9700, SR9700

USB – Device serial number

by SebastiaanPosted on 2020-06-10 Geplaatst in Randapparatuur op de Raspberry Pi (USB), USB Apparaten

With this python script you can retrieve serialnumber from USB devices (if present), you need to install pyusb first: sudo pip install pyusb Please note: You must run the python script with SUDO in front, otherwise you have no access to the devices …

USB – Device serial number Read More »

Getagd met HID, Human Interface Device, PyUSB, Serial number, USB

USB – HID human interface device

by SebastiaanPosted on 2020-06-10 Geplaatst in Randapparatuur op de Raspberry Pi (USB), USB Apparaten

With this python script you can capture keyboard (emulators) and barcode scanners trough evdev (event device), this way the part of code will only execute when the device is sending keys:

from evdev import *
dev = InputDevice('/dev/input/event1')

print(dev)

for event in dev.read_loop():
    if event.type == ecodes.EV_KEY:
        print(categorize(event))

from evdev import *

dev = InputDevice('/dev/input/event1')

print(dev)

for event in dev.read_loop():

if event.type == ecodes.EV_KEY:

print(categorize(event))

output:

key event at 1383327570.147000, 2 (KEY_1), down
key event at 1383327570.147990, 2 (KEY_1), up
key event at 1383327570.148997, 3 (KEY_2), down
key event at 1383327570.150010, 3 (KEY_2), up
key event at 1383327570.151009, 29 (KEY_LEFTCTRL), down
key event at 1383327570.151009, 42 (KEY_LEFTSHIFT), down
key event at 1383327570.152017, 36 (KEY_J), down
key event at 1383327570.153005, 36 (KEY_J), up
key event at 1383327570.154004, 29 (KEY_LEFTCTRL), up
key event at 1383327570.155005, 32 (KEY_D), down
key event at 1383327570.155993, 32 (KEY_D), up
key event at 1383327570.157002, 48 (KEY_B), down
key event at 1383327570.158015, 48 (KEY_B), up
key event at 1383327570.158997, 48 (KEY_B), down
key event at 1383327570.282002, 18 (KEY_E), up
key event at 1383327570.283004, 49 (KEY_N), down
key event at 1383327570.284005, 49 (KEY_N), up
key event at 1383327570.284968, 18 (KEY_E), down

key event at 1383327570.147000, 2 (KEY_1), down

key event at 1383327570.147990, 2 (KEY_1), up

key event at 1383327570.148997, 3 (KEY_2), down

key event at 1383327570.150010, 3 (KEY_2), up

key event at 1383327570.151009, 29 (KEY_LEFTCTRL), down

key event at 1383327570.151009, 42 (KEY_LEFTSHIFT), down

key event at 1383327570.152017, 36 (KEY_J), down

key event at 1383327570.153005, 36 (KEY_J), up

key event at 1383327570.154004, 29 (KEY_LEFTCTRL), up

key event at 1383327570.155005, 32 (KEY_D), down

key event at 1383327570.155993, 32 (KEY_D), up

key event at 1383327570.157002, 48 (KEY_B), down

key event at 1383327570.158015, 48 (KEY_B), up

key event at 1383327570.158997, 48 (KEY_B), down

key event at 1383327570.282002, 18 (KEY_E), up

key event at 1383327570.283004, 49 (KEY_N), down

key event at 1383327570.284005, 49 (KEY_N), up

key event at 1383327570.284968, 18 (KEY_E), down

Another python script example:

import evdev
from evdev import InputDevice, categorize  # import * is evil :)
dev = InputDevice('/dev/input/event1')

# Provided as an example taken from my own keyboard attached to a Centos 6 box:
scancodes = {
    # Scancode: ASCIICode
    0: None, 1: u'ESC', 2: u'1', 3: u'2', 4: u'3', 5: u'4', 6: u'5', 7: u'6', 8: u'7', 9: u'8',
    10: u'9', 11: u'0', 12: u'-', 13: u'=', 14: u'BKSP', 15: u'TAB', 16: u'Q', 17: u'W', 18: u'E', 19: u'R',
    20: u'T', 21: u'Y', 22: u'U', 23: u'I', 24: u'O', 25: u'P', 26: u'[', 27: u']', 28: u'CRLF', 29: u'LCTRL',
    30: u'A', 31: u'S', 32: u'D', 33: u'F', 34: u'G', 35: u'H', 36: u'J', 37: u'K', 38: u'L', 39: u';',
    40: u'"', 41: u'`', 42: u'LSHFT', 43: u'\\', 44: u'Z', 45: u'X', 46: u'C', 47: u'V', 48: u'B', 49: u'N',
    50: u'M', 51: u',', 52: u'.', 53: u'/', 54: u'RSHFT', 56: u'LALT', 100: u'RALT'
}
for event in dev.read_loop():
    if event.type == evdev.ecodes.EV_KEY:
        data = evdev.categorize(event)  # Save the event temporarily to introspect it
        if data.keystate == 1:  # Down events only
            key_lookup = scancodes.get(data.scancode) or u'UNKNOWN:{}'.format(data.scancode)  # Lookup or return UNKNOWN:XX
            print u'You Pressed the {} key!'.format(key_lookup)  # Print it all out!

import evdev

from evdev import InputDevice, categorize # import * is evil :)

dev = InputDevice('/dev/input/event1')

# Provided as an example taken from my own keyboard attached to a Centos 6 box:

scancodes = {

# Scancode: ASCIICode

0: None, 1: u'ESC', 2: u'1', 3: u'2', 4: u'3', 5: u'4', 6: u'5', 7: u'6', 8: u'7', 9: u'8',

10: u'9', 11: u'0', 12: u'-', 13: u'=', 14: u'BKSP', 15: u'TAB', 16: u'Q', 17: u'W', 18: u'E', 19: u'R',

20: u'T', 21: u'Y', 22: u'U', 23: u'I', 24: u'O', 25: u'P', 26: u'[', 27: u']', 28: u'CRLF', 29: u'LCTRL',

30: u'A', 31: u'S', 32: u'D', 33: u'F', 34: u'G', 35: u'H', 36: u'J', 37: u'K', 38: u'L', 39: u';',

40: u'"', 41: u'`', 42: u'LSHFT', 43: u'\\', 44: u'Z', 45: u'X', 46: u'C', 47: u'V', 48: u'B', 49: u'N',

50: u'M', 51: u',', 52: u'.', 53: u'/', 54: u'RSHFT', 56: u'LALT', 100: u'RALT'

}

for event in dev.read_loop():

if event.type == evdev.ecodes.EV_KEY:

data = evdev.categorize(event) # Save the event temporarily to introspect it

if data.keystate == 1: # Down events only

key_lookup = scancodes.get(data.scancode) or u'UNKNOWN:{}'.format(data.scancode) # Lookup or return UNKNOWN:XX

print u'You Pressed the {} key!'.format(key_lookup) # Print it all out!

Output: …

USB – HID human interface device Read More »

Getagd met Barcode, EVDEV, HID, Human Interface Device, Keyboard, Python

USB Apparaat – Barcode scanner

by SebastiaanPosted on 2019-07-28 Geplaatst in USB Apparaten

Barcode scanners NETUM NT-2012 Wired 1D Laser Barcode Scanner Features: Handheld Laser barcode scanner can be used to scan and decode linear one-dimensional (1D) colored barcodes Decode Capability: Code11, Code39, Code93, Code32, Code128, Coda Bar, UPC-A, UPC-E, ISBN, EAN-8, EAN-13, …

USB Apparaat – Barcode scanner Read More »

Getagd met 1d, Barcode, Barcode scanner, Netum, NT-2012, scanner, streepjescode

USB Converter – Mbus naar USB

by SebastiaanPosted on 2017-10-07 Geplaatst in USB Apparaten

Een Mbus naar USB converter, krijg hem niet aan de praat met een aangelsoten Mbus meter, de software wil niet starten ivm een missend OCX bestand, geprobeerd de OCX te Registreren op Windows 10, maar helaas dat wil niet zomaar. …

USB Converter – Mbus naar USB Read More »

Getagd met converter, mbus, OCX, software, USB

USB Stick – WiFi Linksys WUSB300M

by SebastiaanPosted on 2017-04-26 Geplaatst in Randapparatuur op de Raspberry Pi (USB), USB Apparaten

Specificaties (eng): Model: WUSB300N Ports: USB Port LEDs: Power, Link/Act Detachable (Yes/No):No Modulations: 802.11b: CCK, QPSK, BPSK 802.11g: OFDM Wireless-N: BPSK, QPSK, 16-QAM, 64-QAM RF Pwr (EIRP) in dBm: 802.11b: 14±1 dBm (Typical) 802.11g: 14±1 dBm (Typical) Wireless-N: 14±1 dBm …

USB Stick – WiFi Linksys WUSB300M Read More »

Getagd met Linksys, software, Stick, USB, WUSB300N

USB LAB Voeding – Velleman LABPS3005D

by SebastiaanPosted on 2017-03-29 Geplaatst in USB Apparaten

Velleman LABPS3005D LAB Voeding 30V 5A KENMERKEN VELLEMAN LABPS3005D dubbele led-display voor spanning en stroom fijn- en grofregeling van spanning en stroom beveiligingsmode: spannings- of stroombegrenzing uitgangsconnectoren: geïsoleerde veiligheidsaansluitingen frontpaneel uit organisch glas / andere panelen uit staal low noise …

USB LAB Voeding – Velleman LABPS3005D Read More »

Getagd met AB, Drivers, LABPS3005D, manual, SDK, software, USB, Velleman, Voeding

USB Audio – Logitech Socom (PS2 Headset)

by SebastiaanPosted on 2016-10-03 Geplaatst in Randapparatuur op de Raspberry Pi (USB), USB Apparaten

Informatie (ENG): Logitech has announced that it will release a new USB headset for the PlayStation 2 later this month. The headset will feature a digital USB processor, as well as a noise-canceling microphone to improve audio quality. It will …

USB Audio – Logitech Socom (PS2 Headset) Read More »

Getagd met 046d:0a01, Logitech, PS2 headset, Socom, USB Audio

USB Oscilloscoop – Hantek 6022BE

by SebastiaanPosted on 2016-03-03 Geplaatst in USB Apparaten

Hantek 6022BE PC-Based USB Digital Storage Oscilloscope 2 Channels 20MHz 48MSa/s Informatie (ENG) Specificaties: Cost-effectiveness; Excellent industrial design-the same anodised aluminium casing as iPad, which is not only beautiful and tasteful but also greatly enhanced the hardness of aluminum alloy …

USB Oscilloscoop – Hantek 6022BE Read More »

Getagd met 6022BE, Drivers, Hantek, manual, Open6022be, Oscilloscoop, SDK, software, USB

USB Gaming Hardware – Steelseries

by SebastiaanPosted on 2016-02-17 Geplaatst in USB Apparaten

Drivers voor Steelseries gaming hardware.

Getagd met Apex, driver, Hardware, M800, Steelseries, USB