Tag: handleidingen

Builder 3D Mono – Bricked printrboard verhelpen

Informatie – Bricked printrboard verhelpen Je hebt wel eens van die momenten dat er wat misgaat met uploaden van firmware, resultaat is dan een “bricked” printrboard, geen COM poorten..niets meer… De oplossing is om via de ISP pinnen weer een …

Builder 3D Mono – Bricked printrboard verhelpen Read More »

Getagd met Bootloader, Builder 3D, Builder 3D Solo, Firmware, Flashen, handleidingen, informatie, Printrboard

Builder 3D – Firmware

Informatie – Firmware Met behulp van de volgende G-code commando’s kan men de firmware gegevens opvragen van de Builder 3D. Builder 3D Mono Model V2.1010C / Firmware V2.1010C (sticker) V2.1010B (firmware output)

start
echo:PowerUp
Brown out Reset
Marlin 1.0.0
echo: Last Updated: Feb  6 2014 07:52:17 | Author: (none, default config)
FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6
FIRMWARE_URL:http://www.3dprinter4U.com
PROTOCOL_VERSION:V2.1010B
MACHINE_TYPE:Builder
EXTRUDER_COUNT:1
ok

start

echo:PowerUp

Brown out Reset

Marlin 1.0.0

echo: Last Updated: Feb 6 2014 07:52:17 | Author: (none, default config)

FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6

FIRMWARE_URL:http://www.3dprinter4U.com

PROTOCOL_VERSION:V2.1010B

MACHINE_TYPE:Builder

EXTRUDER_COUNT:1

In repetier host:

echo:Stored settings retrieved
echo:Steps per unit:
echo:  M92 X100.00 Y80.00 Z400.00 E50.00
echo:Maximum feedrates (mm/s):
echo:  M203 X500.00 Y500.00 Z5.00 E25.00
echo:Maximum Acceleration (mm/s2):
echo:  M201 X9000 Y9000 Z100 E10000
echo:Acceleration: S=acceleration, T=retract acceleration
echo:  M204 S3000.00 T3000.00
echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s),  Z=maximum Z jerk (mm/s),  E=maximum E jerk (mm/s)
echo:  M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00
echo:Home offset (mm):
echo:  M206 X0.00 Y0.00 Z0.00
echo:PID settings:
echo:   M301 P9.08 I0.42 D49.22
ok

echo:Stored settings retrieved

echo:Steps per unit:

echo: M92 X100.00 Y80.00 Z400.00 E50.00

echo:Maximum feedrates (mm/s):

echo: M203 X500.00 Y500.00 Z5.00 E25.00

echo:Maximum Acceleration (mm/s2):

echo: M201 X9000 Y9000 Z100 E10000

echo:Acceleration: S=acceleration, T=retract acceleration

echo: M204 S3000.00 T3000.00

echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)

echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00

echo:Home offset (mm):

echo: M206 X0.00 Y0.00 Z0.00

echo:PID settings:

echo: M301 P9.08 I0.42 D49.22

Deze instellingen vind je …

Builder 3D – Firmware Read More »

Getagd met Backup, Builder 3D, Builder 3D Solo, Firmware, Flashen, handleidingen, informatie, Printrboard, V2.1010C, V2.1010H

Builder 3D Mono – Informatie

Website Specificaties van Builder 3D Mono 220 x 210 x 170 mm bouwplatform Fused Deposition Modeling technologie Single en Dual Extruder modellen Print met PLA 0,05mm – 0,35 mm resolutie Volledig geassembleerd 3d printen via SD kaart Mijn review Dit …

Builder 3D Mono – Informatie Read More »

Getagd met Builder 3D, Builder 3D Solo, handleidingen, informatie