Builder 3D Mono – Firmware backup en flashen

Informatie – Firmware backup en flashen Deze pagina behelst het backup en flashen van de firmware op een Builder 3D Mono printer van Code-P West. Let op: U kunt uw garantie verliezen!, eigen risico! Wat heb je nodig? 1) AVRdude (bijvoorbeeld…

Lees meer ›

Geplaatst in 3D Printer - Builder 3D Getagd met Backup, Builder 3D, Builder 3D Solo, Firmware, Flashen, handleidingen, informatie, Printrboard, V2.1010C, V2.1010H

Builder 3D Mono – Firmware informatie

Informatie – Firmware Met behulp van de volgende G-code commando’s kan men de firmware gegevens opvragen van de Builder 3D. Builder 3D Mono Model V2.1010C / Firmware V2.1010C (sticker) V2.1010B (firmware output)

start
echo:PowerUp
Brown out Reset
Marlin 1.0.0
echo: Last Updated: Feb  6 2014 07:52:17 | Author: (none, default config)
FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6
FIRMWARE_URL:http://www.3dprinter4U.com
PROTOCOL_VERSION:V2.1010B
MACHINE_TYPE:Builder
EXTRUDER_COUNT:1
ok

start

echo:PowerUp

Brown out Reset

Marlin 1.0.0

echo: Last Updated: Feb 6 2014 07:52:17 | Author: (none, default config)

FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6

FIRMWARE_URL:http://www.3dprinter4U.com

PROTOCOL_VERSION:V2.1010B

MACHINE_TYPE:Builder

EXTRUDER_COUNT:1

In repetier host:

echo:Stored settings retrieved
echo:Steps per unit:
echo:  M92 X100.00 Y80.00 Z400.00 E50.00
echo:Maximum feedrates (mm/s):
echo:  M203 X500.00 Y500.00 Z5.00 E25.00
echo:Maximum Acceleration (mm/s2):
echo:  M201 X9000 Y9000 Z100 E10000
echo:Acceleration: S=acceleration, T=retract acceleration
echo:  M204 S3000.00 T3000.00
echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s),  Z=maximum Z jerk (mm/s),  E=maximum E jerk (mm/s)
echo:  M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00
echo:Home offset (mm):
echo:  M206 X0.00 Y0.00 Z0.00
echo:PID settings:
echo:   M301 P9.08 I0.42 D49.22
ok

echo:Stored settings retrieved

echo:Steps per unit:

echo: M92 X100.00 Y80.00 Z400.00 E50.00

echo:Maximum feedrates (mm/s):

echo: M203 X500.00 Y500.00 Z5.00 E25.00

echo:Maximum Acceleration (mm/s2):

echo: M201 X9000 Y9000 Z100 E10000

echo:Acceleration: S=acceleration, T=retract acceleration

echo: M204 S3000.00 T3000.00

echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)

echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00

echo:Home offset (mm):

echo: M206 X0.00 Y0.00 Z0.00

echo:PID settings:

echo: M301 P9.08 I0.42 D49.22

Deze instellingen vind je…

Lees meer ›

Geplaatst in 3D Printer - Builder 3D Getagd met Builder 3D, Builder 3D Solo, Firmware, handleidingen, informatie, V2.1010C, V2.1010H