Printrboard Archieven - DomoticX Knowledge Center

Hardware Driver – LUFA CDC

Door Sebastiaan Geplaatst op 2017-07-25 Geplaatst in Hardware Driver/Bootloader Getagd met 3D printer, Bootloader, CDC, CDCbootloader, Printrboard

Een driver voor LUA CDC Bootloader, te installeren via Apparaatbeheer in Windows: De INF:

;************************************************************
; Windows USB CDC ACM Setup File
; Copyright (c) 2000 Microsoft Corporation
;************************************************************

[DefaultInstall]
CopyINF="LUFA CDC Bootloader.inf"

[Version]
Signature="$Windows NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%MFGNAME%
DriverVer=7/1/2012,10.0.0.0

[Manufacturer]
%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64

[SourceDisksNames]

[SourceDisksFiles]

[DestinationDirs]
DefaultDestDir=12

[DriverInstall]
Include=mdmcpq.inf
CopyFiles=FakeModemCopyFileSection
AddReg=DriverInstall.AddReg

[DriverInstall.Services]
Include=mdmcpq.inf
AddService=usbser, 0x00000002, LowerFilter_Service_Inst

[DriverInstall.AddReg]
HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"

;------------------------------------------------------------------------------
;  Vendor and Product ID Definitions
;------------------------------------------------------------------------------
; When developing your USB device, the VID and PID used in the PC side
; application program and the firmware on the microcontroller must match.
; Modify the below line to use your VID and PID.  Use the format as shown below.
; Note: One INF file can be used for multiple devices with different VID and PIDs.
; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
;------------------------------------------------------------------------------
[DeviceList]
%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204A

[DeviceList.NTx86]
%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204A

[DeviceList.NTamd64]
%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204A

[DeviceList.NTia64]
%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204A

;------------------------------------------------------------------------------
;  String Definitions
;------------------------------------------------------------------------------
;Modify these strings to customize your device
;------------------------------------------------------------------------------
[Strings]
MFGNAME="http://www.lufa-lib.org"
DESCRIPTION="LUFA CDC Class Bootloader"

;************************************************************

; Windows USB CDC ACM Setup File

;************************************************************

[DefaultInstall]

CopyINF="LUFA CDC Bootloader.inf"

[Version]

Signature="$Windows NT$"

Class=Ports

ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}

Provider=%MFGNAME%

DriverVer=7/1/2012,10.0.0.0

[Manufacturer]

%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64

[SourceDisksNames]

[SourceDisksFiles]

[DestinationDirs]

DefaultDestDir=12

[DriverInstall]

Include=mdmcpq.inf

CopyFiles=FakeModemCopyFileSection

AddReg=DriverInstall.AddReg

[DriverInstall.Services]

Include=mdmcpq.inf

AddService=usbser, 0x00000002, LowerFilter_Service_Inst

[DriverInstall.AddReg]

HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"

;------------------------------------------------------------------------------

; Vendor and Product ID Definitions

;------------------------------------------------------------------------------

; When developing your USB device, the VID and PID used in the PC side

; application program and the firmware on the microcontroller must match.

; Modify the below line to use your VID and PID. Use the format as shown below.

; Note: One INF file can be used for multiple devices with different VID and PIDs.

; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.

;------------------------------------------------------------------------------

[DeviceList]

%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204A

[DeviceList.NTx86]

%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204A

[DeviceList.NTamd64]

%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204A

[DeviceList.NTia64]

%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204A

;------------------------------------------------------------------------------

; String Definitions

;------------------------------------------------------------------------------

;Modify these strings to customize your device

;------------------------------------------------------------------------------

[Strings]

MFGNAME="http://www.lufa-lib.org"

DESCRIPTION="LUFA CDC Class Bootloader"

[#/mechanica/drivers/lufacdc” ]

Mechanica Hardware – Printrboard pin overview

Door Sebastiaan Geplaatst op 2017-06-25 Geplaatst in 3D Printer Hardware, Hardware (mechanica) Getagd met 3D printer, informatie, Main Board, overview, pin, Printrboard

Printrboard pin overview Informatie (ENG): Hardware The Printrboard electronic set was designed by members of the Printrbot team in order to eliminate the production and functionality shortcomings of older RepRap electronics sets. Printrboard improves upon the previous production-grade electronics set …

Mechanica Hardware – Printrboard pin overview Lees meer »

Builder 3D Mono firmware – Marlin v1.0.1 met Printrboard

Door Sebastiaan Geplaatst op 2017-06-10 Geplaatst in 3D Printer - Builder 3D, Firmware (mechanica) Getagd met 3d print, Builder, Builder 3D, Marlin, Mono, Printrboard

Marlin met Printrboard Builder 3D Mono Arduino1.0.1-Teensy1.09-Marlin1.0.1 Deze pagina beschrijft het backuppen, bijwerken of instellen van de software Marlin voor de 3D printer “Prusa i3”, met behulp van de Arduino IDE. Mijn “Builder 3D Mono 2.1010C” printerconfiguratie (hardware) – Frame: …

Builder 3D Mono firmware – Marlin v1.0.1 met Printrboard Lees meer »

Builder 3D Mono – Bricked printrboard verhelpen

Door Sebastiaan Geplaatst op 2017-06-10 Geplaatst in 3D Printer - Builder 3D Getagd met Bootloader, Builder 3D, Builder 3D Solo, Firmware, Flashen, handleidingen, informatie, Printrboard

Informatie – Bricked printrboard verhelpen Je hebt wel eens van die momenten dat er wat misgaat met uploaden van firmware, resultaat is dan een “bricked” printrboard, geen COM poorten..niets meer… De oplossing is om via de ISP pinnen weer een …

Builder 3D Mono – Bricked printrboard verhelpen Lees meer »

Hardware Bootloader – Printrboard

Door Sebastiaan Geplaatst op 2017-06-10 Geplaatst in 3D Printer Hardware, Hardware Driver/Bootloader Getagd met 3D printer, Arduino ISP, Bootloader, CDC, CDCbootloader, DFU, DFU Bootloader, HID, HID bootloader, informatie, ISP, Main Board, Printrboard

Bootloader?: Een bootloader is een computerprogramma dat zorgdraagt voor het starten van het besturingssysteem bij de opstart (bootstrap) van een computer, veel microcontrollers komen zonder bootloader erop gebrand, dat moeten eindgebruikers zelf doen. De Printrboard is uitgerust met een Atmel …

Hardware Bootloader – Printrboard Lees meer »

Builder 3D – Firmware

Door Sebastiaan Geplaatst op 2017-06-07 Geplaatst in 3D Printer - Builder 3D Getagd met Backup, Builder 3D, Builder 3D Solo, Firmware, Flashen, handleidingen, informatie, Printrboard, V2.1010C, V2.1010H

Informatie – Firmware Met behulp van de volgende G-code commando’s kan men de firmware gegevens opvragen van de Builder 3D. Builder 3D Mono Model V2.1010C / Firmware V2.1010C (sticker) V2.1010B (firmware output)

start
echo:PowerUp
Brown out Reset
Marlin 1.0.0
echo: Last Updated: Feb  6 2014 07:52:17 | Author: (none, default config)
FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6
FIRMWARE_URL:http://www.3dprinter4U.com
PROTOCOL_VERSION:V2.1010B
MACHINE_TYPE:Builder
EXTRUDER_COUNT:1
ok

start

echo:PowerUp

Brown out Reset

Marlin 1.0.0

echo: Last Updated: Feb 6 2014 07:52:17 | Author: (none, default config)

FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6

FIRMWARE_URL:http://www.3dprinter4U.com

PROTOCOL_VERSION:V2.1010B

MACHINE_TYPE:Builder

EXTRUDER_COUNT:1

In repetier host:

echo:Stored settings retrieved
echo:Steps per unit:
echo:  M92 X100.00 Y80.00 Z400.00 E50.00
echo:Maximum feedrates (mm/s):
echo:  M203 X500.00 Y500.00 Z5.00 E25.00
echo:Maximum Acceleration (mm/s2):
echo:  M201 X9000 Y9000 Z100 E10000
echo:Acceleration: S=acceleration, T=retract acceleration
echo:  M204 S3000.00 T3000.00
echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s),  Z=maximum Z jerk (mm/s),  E=maximum E jerk (mm/s)
echo:  M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00
echo:Home offset (mm):
echo:  M206 X0.00 Y0.00 Z0.00
echo:PID settings:
echo:   M301 P9.08 I0.42 D49.22
ok

echo:Stored settings retrieved

echo:Steps per unit:

echo: M92 X100.00 Y80.00 Z400.00 E50.00

echo:Maximum feedrates (mm/s):

echo: M203 X500.00 Y500.00 Z5.00 E25.00

echo:Maximum Acceleration (mm/s2):

echo: M201 X9000 Y9000 Z100 E10000

echo:Acceleration: S=acceleration, T=retract acceleration

echo: M204 S3000.00 T3000.00

echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)

echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00

echo:Home offset (mm):

echo: M206 X0.00 Y0.00 Z0.00

echo:PID settings:

echo: M301 P9.08 I0.42 D49.22

Deze instellingen vind je …

Builder 3D – Firmware Lees meer »

Mechanica Hardware – Printrboard

Door Sebastiaan Geplaatst op 2017-02-25 Geplaatst in 3D Printer Hardware, Hardware (mechanica) Getagd met 3D printer, informatie, Main Board, Printrboard

Informatie (ENG): Hardware The Printrboard electronic set was designed by members of the Printrbot team in order to eliminate the production and functionality shortcomings of older RepRap electronics sets. Printrboard improves upon the previous production-grade electronics set (Gen6) by adding …

Mechanica Hardware – Printrboard Lees meer »

Zoeken

Tag: Printrboard

Hardware Driver – LUFA CDC

Mechanica Hardware – Printrboard pin overview

Builder 3D Mono firmware – Marlin v1.0.1 met Printrboard

Builder 3D Mono – Bricked printrboard verhelpen

Hardware Bootloader – Printrboard

Builder 3D – Firmware

Mechanica Hardware – Printrboard