Tag: programmeren

Python Library – pymodbusTCP

Python pymodbusTCP Voor communicatie van Modbus TCP/IP Niet voor Modbus RTU Modbus ASCII Modbus RTU over TCP Installatie:

sudo apt-get update
sudo apt-get install -y python-dev python-pip
sudo pip install -U pymodbusTCP

sudo apt-get update

sudo apt-get install -y python-dev python-pip

sudo pip install -U pymodbusTCP

Installatie voor Python 3:

sudo apt-get update
sudo apt-get install -y python3 python3-dev python-pip
sudo pip3 install -U pymodbusTCP

sudo apt-get update

sudo apt-get install -y python3 python3-dev python-pip

sudo pip3 install -U pymodbusTCP

Mijn voorbeeld:

#!/usr/bin/env python
from pyModbusTCP.client import ModbusClient

client = ModbusClient(host="192.168.0.0", port=502, auto_open=True, auto_close=True, timeout=10)
data = client.read_holding_registers(0, 1)    # FUNCTIE 03 - Lees register 0, 1 lang
print "Waarde register: ", data[0]
client.close()

#!/usr/bin/env python

from pyModbusTCP.client import ModbusClient

client = ModbusClient(host="192.168.0.0", port=502, auto_open=True, auto_close=True, timeout=10)

data = client.read_holding_registers(0, 1) # FUNCTIE 03 - Lees register 0, 1 lang

print "Waarde register: ", data[0]

client.close()

Informatie (ENG): Summary A simple Modbus/TCP library for Python A simple Modbus/TCP client…

Lees meer ›

Getagd met bibliotheek, programmeren, pymodbusTCP, Python

Python Library – pymodbus

Python pymodbus Voor communicatie van Modbus RTU Modbus ASCII Modbus RTU over TCP Niet voor Modbus TCP/IP Installatie:

sudo apt-get update
sudo apt-get install -y python-dev python-pip
sudo pip install -U pymodbus

sudo apt-get update

sudo apt-get install -y python-dev python-pip

sudo pip install -U pymodbus

Installatie voor Python 3:

sudo apt-get update
sudo apt-get install -y python3 python3-dev python-pip
sudo pip3 install -U pymodbus

sudo apt-get update

sudo apt-get install -y python3 python3-dev python-pip

sudo pip3 install -U pymodbus

Collecting pymodbus3
  Downloading https://www.piwheels.hostedpi.com/simple/pymodbus3/pymodbus3-1.0.0-py3-none-any.whl (76kB)
    100% |¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦| 81kB 1.5MB/s
Collecting pyserial>=2.6 (from pymodbus3)
  Using cached pyserial-3.4-py2.py3-none-any.whl
Collecting twisted>=12.2.0 (from pymodbus3)
  Downloading https://www.piwheels.hostedpi.com/simple/twisted/Twisted-17.9.0-cp35-cp35m-linux_armv7l.whl (3.0MB)
    100% |¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦| 3.0MB 98kB/s
Collecting incremental>=16.10.1 (from twisted>=12.2.0->pymodbus3)
  Downloading incremental-17.5.0-py2.py3-none-any.whl
Collecting constantly>=15.1 (from twisted>=12.2.0->pymodbus3)
  Downloading constantly-15.1.0-py2.py3-none-any.whl
Collecting hyperlink>=17.1.1 (from twisted>=12.2.0->pymodbus3)
  Downloading hyperlink-17.3.1-py2.py3-none-any.whl (73kB)
    100% |¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦| 81kB 2.0MB/s
Collecting zope.interface>=4.0.2 (from twisted>=12.2.0->pymodbus3)
  Downloading https://www.piwheels.hostedpi.com/simple/zope-interface/zope.interface-4.4.3-cp35-cp35m-linux_armv7l.whl (161kB)
    100% |¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦| 163kB 1.4MB/s
Collecting Automat>=0.3.0 (from twisted>=12.2.0->pymodbus3)
  Downloading Automat-0.6.0-py2.py3-none-any.whl
Collecting setuptools (from zope.interface>=4.0.2->twisted>=12.2.0->pymodbus3)
  Downloading setuptools-38.4.0-py2.py3-none-any.whl (489kB)
    100% |¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦| 491kB 549kB/s
Collecting six (from Automat>=0.3.0->twisted>=12.2.0->pymodbus3)
  Downloading six-1.11.0-py2.py3-none-any.whl
Collecting attrs (from Automat>=0.3.0->twisted>=12.2.0->pymodbus3)
  Downloading attrs-17.4.0-py2.py3-none-any.whl
Installing collected packages: pyserial, incremental, constantly, hyperlink, setuptools, zope.interface, six, attrs, Automat, twisted, pymodbus3
  Found existing installation: pyserial 3.2.1
    Not uninstalling pyserial at /usr/lib/python3/dist-packages, outside environment /usr
  Found existing installation: setuptools 33.1.1
    Not uninstalling setuptools at /usr/lib/python3/dist-packages, outside environment /usr
  Found existing installation: six 1.10.0
    Not uninstalling six at /usr/lib/python3/dist-packages, outside environment /usr
Successfully installed Automat-0.6.0 attrs-17.4.0 constantly-15.1.0 hyperlink-17.3.1 incremental-17.5.0 pymodbus3-1.0.0 pyserial-3.4 setuptools-38.4.0 six-1.11.0 twisted-17.9.0 zope.interface-4.4.3

Collecting pymodbus3

Downloading https://www.piwheels.hostedpi.com/simple/pymodbus3/pymodbus3-1.0.0-py3-none-any.whl (76kB)

100% |¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦| 81kB 1.5MB/s

Collecting pyserial>=2.6 (from pymodbus3)

Using cached pyserial-3.4-py2.py3-none-any.whl

Collecting twisted>=12.2.0 (from pymodbus3)

Downloading https://www.piwheels.hostedpi.com/simple/twisted/Twisted-17.9.0-cp35-cp35m-linux_armv7l.whl (3.0MB)

100% |¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦| 3.0MB 98kB/s

Collecting incremental>=16.10.1 (from twisted>=12.2.0->pymodbus3)

Downloading incremental-17.5.0-py2.py3-none-any.whl

Collecting constantly>=15.1 (from twisted>=12.2.0->pymodbus3)

Downloading constantly-15.1.0-py2.py3-none-any.whl

Collecting hyperlink>=17.1.1 (from twisted>=12.2.0->pymodbus3)

Downloading hyperlink-17.3.1-py2.py3-none-any.whl (73kB)

100% |¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦| 81kB 2.0MB/s

Collecting zope.interface>=4.0.2 (from twisted>=12.2.0->pymodbus3)

Downloading https://www.piwheels.hostedpi.com/simple/zope-interface/zope.interface-4.4.3-cp35-cp35m-linux_armv7l.whl (161kB)

100% |¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦| 163kB 1.4MB/s

Collecting Automat>=0.3.0 (from twisted>=12.2.0->pymodbus3)

Downloading Automat-0.6.0-py2.py3-none-any.whl

Collecting setuptools (from zope.interface>=4.0.2->twisted>=12.2.0->pymodbus3)

Downloading setuptools-38.4.0-py2.py3-none-any.whl (489kB)

100% |¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦| 491kB 549kB/s

Collecting six (from Automat>=0.3.0->twisted>=12.2.0->pymodbus3)

Downloading six-1.11.0-py2.py3-none-any.whl

Collecting attrs (from Automat>=0.3.0->twisted>=12.2.0->pymodbus3)

Downloading attrs-17.4.0-py2.py3-none-any.whl

Installing collected packages: pyserial, incremental, constantly, hyperlink, setuptools, zope.interface, six, attrs, Automat, twisted, pymodbus3

Found existing installation: pyserial 3.2.1

Not uninstalling pyserial at /usr/lib/python3/dist-packages, outside environment /usr

Found existing installation: setuptools 33.1.1

Not uninstalling setuptools at /usr/lib/python3/dist-packages, outside environment /usr

Found existing installation: six 1.10.0

Not uninstalling six at /usr/lib/python3/dist-packages, outside environment /usr

Successfully installed Automat-0.6.0 attrs-17.4.0 constantly-15.1.0 hyperlink-17.3.1 incremental-17.5.0 pymodbus3-1.0.0 pyserial-3.4 setuptools-38.4.0 six-1.11.0 twisted-17.9.0 zope.interface-4.4.3

Informatie (ENG): Summary Pymodbus is a full Modbus protocol implementation using twisted for its asynchronous…

Lees meer ›

Getagd met bibliotheek, Library, programmeren, pymodbus, Python

Python Library – OLED display (luma.oled)

Python OLED library (luma.oled) Informatie (ENG): Display drivers for SSD1306 / SSD1322 / SSD1325 / SSD1331 / SH1106 Python library interfacing OLED matrix displays with the SSD1306, SSD1322, SSD1325, SSD1331 or SH1106 driver using I2C/SPI on the Raspberry Pi and…

Lees meer ›

Getagd met bibliotheek, Display, Library, OLED, programmeren, Python, SH1106, SSD1306, SSD1322, SSD1325, SSD1331

Python Library – APDS9930

Informatie (ENG): Python module for the APDS-9930 I2C Ambient Light and Proximity sensor This is a Python port of the AVR APDS-9930 library. Simple and easy to use. Makes heavy use of Python-specific programming concepts, such as properties, to make…

Lees meer ›

Getagd met APDS9930, APDS9960, bibliotheek, Library, programmeren, Python, Raspberry pi

Python Library – BMP085 / BMP180 (GY-68)

Python Library – BMP 085/180 Hardware: Informatie (ENG): Python library for accessing the BMP series pressure and temperature sensors like the BMP085/BMP180 on a Raspberry Pi or Beaglebone Black. To install, download the library by clicking the download zip link to…

Lees meer ›

Getagd met bibliotheek, BMP 085, BMP 180, Library, programmeren, Python, Raspberry pi

Python Library – PIGPIO

PIGPIO Website Informatie (ENG): pigpio is a C library for the Raspberry which allows control of the general purpose input outputs (gpios). Features

sampling and time-stamping of gpios 0-31 between 100,000 and 1,000,000 times per second.

provision of PWM on any number of the user gpios simultaneously.

provision of servo pulses on any number of the user gpios simultaneously.

callbacks when any of gpios 0-31 change state (callbacks receive the time of the event
accurate to a few microseconds).

notifications via pipe when any of gpios 0-31 change state.

callbacks at timed intervals.

reading/writing all of the gpios in a bank (0-31, 32-53) as a single operation.

individually setting gpio modes, reading and writing.

socket and pipe interfaces for the bulk of the functionality in addition to the
underlying C library calls.

the construction of arbitrary waveforms to give precise timing of output gpio
level changes (accurate to a few microseconds).

software serial links using any user gpio.

rudimentary permission control through the socket and pipe interfaces so users
can be prevented from "updating" inappropriate gpios.

creating and running scripts on the pigpio daemon.

sampling and time-stamping of gpios 0-31 between 100,000 and 1,000,000 times per second.

provision of PWM on any number of the user gpios simultaneously.

provision of servo pulses on any number of the user gpios simultaneously.

callbacks when any of gpios 0-31 change state (callbacks receive the time of the event

accurate to a few microseconds).

notifications via pipe when any of gpios 0-31 change state.

callbacks at timed intervals.

reading/writing all of the gpios in a bank (0-31, 32-53) as a single operation.

individually setting gpio modes, reading and writing.

socket and pipe interfaces for the bulk of the functionality in addition to the

underlying C library calls.

the construction of arbitrary waveforms to give precise timing of output gpio

level changes (accurate to a few microseconds).

software serial links using any user gpio.

rudimentary permission control through the socket and pipe interfaces so users

can be prevented from "updating" inappropriate gpios.

creating and running scripts on the pigpio daemon.

Interfaces The library provides a number of control interfaces

the C function interface

the /dev/pigpio pipe interface

the socket interface (used by the pigs utility and the Python module)

the C function interface

the /dev/pigpio pipe interface

the socket interface (used by the pigs utility and the Python module)

Utilities A number of utility programs…

Lees meer ›

Getagd met bibliotheek, Library, pigpio, programmeren, Python

Python Library – spidev

Python spidev library Informatie (ENG): Python bindings for Linux SPI access through spidev Python Spidev ============= This project contains a python module for interfacing with SPI devices from user space via the spidev linux kernel driver. This is a modified…

Lees meer ›

Getagd met bibliotheek, Library, programmeren, Python, spidev

Programmeren – Perl (Linux/Windows)

Website Wat is Perl? Perl is een programmeertaal ontworpen door Larry Wall die eigenschappen van C en UNIX-scripttalen zoals sh, sed enawk in zich verenigt. De afkorting Perl staat voor Practical Extraction and Report Language. Perl is geschikt als vervanger…

Lees meer ›

Getagd met Linux, Perl, programmeren, scripting, windows

Programmeren – Ruby (Linux/Windows)

Website Wat is Ruby? Ruby is een programmeertaal, die doorgaans wordt geïnterpreteerd. De taal is ontworpen om snel en makkelijk objectgeoriënteerd te programmeren. Het heeft verschillende mogelijkheden om tekstbestanden te verwerken en kan ook systeemtaken aan. De grammatica van Ruby…

Lees meer ›

Getagd met Linux, programmeren, Ruby, scripting, windows

Programmeren – LUA (Linux/Windows)

Website Wat is Lua? Lua is een lichtgewicht multi-paradigma programmeertaal ontworpen als een scripting taal met “uitbreidbaar semantiek” als een primair doel. Lua is cross-platform , omdat het is geschreven in ISO C . Lua heeft een relatief eenvoudige C…

Lees meer ›

Getagd met Linux, LUA, programmeren, scripting, windows